X-ray fluorescence spectroscopy and Monte Carlo characterization of a unique nuragic artifact (Sardinia, Italy), in: Spectrochimica Acta Part B, 121, 2016, pp. 18-21 (original) (raw)
Related papers
Spectrochimica Acta Part B: Atomic Spectroscopy, 2016
The chemical composition of a unique bronze artifact known as the "Cesta" ("Basket") belonging to the ancient Nuragic civilization of the Island of Sardinia, Italy has been analyzed by combining X-ray Fluorescence Spectroscopy (XRF) with Monte Carlo simulations using the XRMC code. The "Cesta" had been discovered probably in the XVIII century with the first graphic representation reported around 1761. In a later draft (dated 1764), the basket has been depicted as being carried upside-down on the shoulder of a large bronze warrior Barthélemy (1761), Pinza (1901), Winckelmann (1776). The two pictorial representations differed only by the presence of handles in the most recent one. XRF measurements revealed that the handles of the object are composed by brass while the other parts are composed by bronze suggesting the handles as being a later addition to the original object. The artifact is covered at its surface by a fairly thick corrosion patina. In order to determine the bronze bulk composition without the need for removing the outer patina, the artifact has been modeled as a two layer object in Monte Carlo simulations.
Spectrochimica Acta Part B 123, 2016
A spectrometric protocol combining Energy Dispersive X-Ray Fluorescence Spectrometry with Monte Carlo simulations of experimental spectra using the XRMC code package has been applied for the first time to characterize the elemental composition of a series of famous Iron Age small scale archaeological bronze replicas of ships (known as the "Navicelle") from the Nuragic civilization in Sardinia, Italy. The proposed protocol is a useful, nondestructive and fast analytical tool for Cultural Heritage sample. In Monte Carlo simulations, each sample was modeled as a mul-tilayered object composed by two or three layers depending on the sample: when all present, the three layers are the original bronze substrate, the surface corrosion patina and an outermost protective layer (Paraloid) applied during past restorations. Monte Carlo simulations were able to account for the presence of the patina/corrosion layer as well as the presence of the Paraloid protective layer. It also accounted for the roughness effect commonly found at the surface of corroded metal archaeological artifacts. In this respect, the Monte Carlo simulation approach adopted here was, to the best of our knowledge, unique and enabled to determine the bronze alloy composition together with the thickness of the surface layers without the need for previously removing the surface patinas, a process potentially threatening preservation of precious archaeological/artistic artifacts for future generations.
Materials , 2023
This paper describes the results obtained from an archaeometric study of a bronze Nuragic small boat model (Sardinia, Italy) dating from the Early Iron Age. This model is of particular interest as it is a unique Nuragic boat model containing a human figure among its decorations. This study was carried out using a combination of non-invasive techniques with energy dispersive X-ray fluorescence spectrometry (ED-XRF) integrated with Monte Carlo (MC) simulations and Raman spectroscopy, which allowed the characterization of the alloy of the artifact
Multispectral Analysis of Miniature Nuragic Bronze Flasks
Heritage, 2021
Miniaturized bronze flasks represent a small portion of a wide metallurgical production that flourished in Sardinia (Italy) between the Final Bronze Age (FBA) and the Early Iron Age (EIA). They replicate a well-known and symbolic type of object, the pilgrims’ flask, common in all Europe and Mediterranean basin, and have but few archaeological parallels. For these reasons, their characterization can be considered important from an archaeological perspective. Three flasks, preserved at the Antiquarium Arborense museum (Oristano), were analyzed by X-Ray Fluorescence Spectroscopy (XRF) and Raman spectroscopy, integrated by multispectral images. The samples, coming from illegal excavations, posed two problems: establishing their authenticity and investigating the alloy composition of such particular objects. All specimens presented a widespread degradation in the outer surface: XRF and Raman spectroscopy indicated the presence of copper oxides, calcium and copper carbonates deposits. The...
X‐Ray Spectrometry, 2018
Studies of Iberian votive figurines have extended our knowledge of Iberian culture and have provided valuable information both on technological aspects of the metal processing and on social and religious patterns inside these communities. In this study, we present an energy dispersive X-ray fluorescence analysis of the copper alloys of a selection of 32 Iberian votive figurines and two fibulae (fourth-third centuries BC) in the collection of the Museum of Prehistory in Valencia. The collection comprises 98 bronze objects from the Iberian sanctuaries of Collado de los Jardines (Santa Elena) and Altos del Sotillo (Castellar), in Jaén, Spain. The results reveal a diversity of Cu-Sn-Pb alloys among the votive figurines, including copper, leaded copper (Pb > 2 wt.%, Sn <2 wt.%), binary bronzes (Sn >2 wt.%, Pb <2 wt.%), and ternary bronzes (Sn >2 wt.%, Pb >2 wt.%). The analyses of the bronze alloys are compared with those of other regional votive collections dating from the same period.
Analysis of Sagunto Ibero-Roman votive bronze statuettes by portable X-ray fluorescence
Radiation Physics and Chemistry, 2019
The main objective of this work was the study of chemical composition of an important collection of Ibero-Roman votive bronze statuettes exposed in the Archaeological Museum of Sagunto (Spain). Precision and accuracy of the measurements were obtained developing a proper analytical method, also avoiding any possible damage to the studied objects using a portable energy dispersive X-ray fluorescence system. Principal Components Analysis (PCA) to discriminate between groups based on ratios Fe/Cu, Pb/Cu, Sn/Cu, Ag/Cu, Ni/Cu and Impurities/Cu were employed to observe differences between the used smelting, manufacturing processes and raw materials. The characterisation of bronze statuettes cross-referenced with archaeological data, gave important suggestions to clarify issues regarding manufacturing processes, quality and chronologies of the studied objects.
Spectrochimica Acta Part B Atomic Spectroscopy
In this work we evaluate the composition of a bronze alloy using X-ray fluorescence spectrometry (XRF) and Monte Carlo (MC) simulations. For this purpose, a 7th Century BC archaeological vase from the SW Iberian Peninsula, displaying a well formed corrosion patina was analysed by means of a portable X-ray fluorescence spectrometer. Realistic MC simulations of the experimental setup were performed with the XRMC code package which is based on an intensive use of variance-reduction techniques and uses XRAYLIB a constantly updated X-ray library of atomic data. A single layer model was applied for simulating XRF of polished/pristine bronze whereas a two or three layers model was developed for bronze covered respectively by a corrosion patina alone or coupled with a superficial soil derived crust. These simulations took into account corrosion (cerussite (PbCO3), cuprite (Cu2O), malachite (Cu2CO3(OH)2), litharge (PbO)) and soil derived products (goethite (FeO(OH)) and quartz (SiO2)) identi...
The Strange Case of the Nuragic Offerers Bronze Statuettes: A Multi-Analytical Study
Materials
The Nuragic civilization (Sardinia, Italy, XVIII–VIII B.C) developed a flourishing bronze metallurgy with strong connections with other civilizations from the Mediterranean basin. Within the large bronze production, there are some peculiar representations of human figures, known in the archaeological environment of Sardinia as bronzetti, depicting warriors, priests, and offerers. In this paper, an interesting couple of Nuragic statuettes representing offerers, one from the Pigorini Museum in Rome and another from the Musei Reali in Turin, were analyzed. They have been investigated with X-ray fluorescence integrated with Monte Carlo simulations (XRF-MC). The combined methodology provides more accurate results, ranging from the structural characterization to the identification of the corrosion layers to the estimation of the composition of the alloy of the artifact. One of the most striking results regards the heads of the offerers: both heads are covered with a thick iron-based layer...
A Roman bronze statuette with gilded silver mask from Sardinia: an EDXRF study
Applied Physics A, 2013
A Roman bronze statuette from the 2nd Century BC was recovered from a nuragic sanctuary close to Florinas, in the north of Sardinia. The facial portion of the statuette is covered by a silver mask, partially gilded and attached to the bronze by tin-lead welding. The silver mask was carefully analyzed by portable energy-dispersive X-ray fluorescence (EDXRF), a nondestructive and non-invasive method. The aim of the analysis was to reconstruct the layered structure of the silver gilt mask, and to determine homogeneity and thickness of the gold, silver and lead-tin sheets. This is possible by using the internal ratio of the X-ray lines, i.e. starting from the surface, Au (Lα/Lβ), Ag (Kα/Kβ), Au-Lα/Ag-Kα and Pb (Lα/Lβ).The results were compared with those obtained with simulated X-ray spectra, obtained both experimentally and by using the Monte Carlo simulation technique. R. Cesareo () Istituto per lo Studio dei Materiali Nanostrutturati,