A DSC analysis of thermodynamic properties and solidification characteristics for binary Cu–Sn alloys (original) (raw)
The Effect of the Cooling Rate on the Microstructure and Microsegregation: An Experimental and Numerical Investigation of Solidification in Hypoperitectic Cu − 20 wt.% Sn Alloy
Késsia Paradela
Materials Research
View PDFchevron_right
Competition of the primary and peritectic phases in hypoperitectic Cu–Sn alloys solidified at low speed in a diffusive regime
M. Rappaz
Acta Materialia, 2012
View PDFchevron_right
Structural evolution in the solidification process of Cu–Sn alloys
jingyu qin
Journal of Non-crystalline Solids, 2007
View PDFchevron_right
EFFECT OF COOLING RATE ON STRESS-STRAIN BEHAVIOUR AND MICROSTRUCTURE OF A CU- ZN- SN ALLOY
HARUN ÇELİK
View PDFchevron_right
Thermodynamic assessment of Sn–Cu–Ce system
Frank Zheng
Calphad, 2013
View PDFchevron_right
Morphologies, orientation relationships and evolution of Cu< sub> 6 Sn< sub> 5 grains formed between molten Sn and Cu single crystals
Huajie Yang
Acta Materialia, 2008
View PDFchevron_right
X-ray diffraction studies of the decomposition and microstructural characterization of cold-worked powders of Cu–15Ni–Sn alloys by Rietveld analysis
Puspendu Sahu
Journal of Alloys and Compounds, 2004
View PDFchevron_right
Thermal Parameters, Microstructure, and Mechanical Properties of Directionally Solidified Sn-0.7 wt.%Cu Solder Alloys Containing 0 ppm to 1000 ppm Ni
Amauri Garcia
Journal of Electronic Materials, 2013
View PDFchevron_right
A study of precipitation in a Cu15 wt%Ni8 wt%Sn alloy
Felipe de Jesus Perez Muñoz
Journal of Materials Science Letters, 1999
View PDFchevron_right
Solid-State Reactions between Cu(Ni) Alloys and Sn
Vesa Vuorinen
Journal of Electronic Materials, 2007
View PDFchevron_right
Thermal transitions in metastable Cu – 68.5 at. % Co alloy
Oluwatoyin E Jegede
Canadian Journal of Chemistry, 2021
View PDFchevron_right
Effect of Ni Content on Microstructure and Characterization of Cu-Ni-Sn Alloys
xiaochao wang
Materials (Basel, Switzerland), 2018
View PDFchevron_right
Formation of Intermetallic Compounds Between Liquid Sn and Various CuNi x Metallizations
Vesa Vuorinen
Journal of Electronic Materials, 2008
View PDFchevron_right
Reactions in Sn corner of Cu–Sn–Zn alloy system
L. Snugovsky, Polina Snugovsky
Materials Science and Technology, 2012
View PDFchevron_right
Experimental Investigations and Thermodynamic Evaluation of the Sn-Cu-O System
Maria Zaharescu
Key Engineering Materials, 2001
View PDFchevron_right
Investigation of Thermal Parameters Effects on the Microstructure, Microhardness and Microsegregation of Cu-Sn alloy Directionally Solidified under Transient Heat Flow Conditions
Roberto Carlos Sales
Materials Research
View PDFchevron_right
Microstructure and precipitation kinetics in a Cu-7.5Ni-5Sn alloy
Michael Notis
Scripta Materialia, 1998
View PDFchevron_right
Morphologies, orientation relationships and evolution of Cu6Sn5 grains formed between molten Sn and Cu single crystals
Huajie Yang
Acta Materialia, 2008
View PDFchevron_right
Calorimetric Investigations of Liquid Cu-In-Sn Alloys
Zuoan Li
MATERIALS TRANSACTIONS, 2006
View PDFchevron_right
Experimental investigation and thermodynamic assessment of the Cu–Sn–Ti ternary system
Peter Uggowitzer
Calphad
View PDFchevron_right
SEM and X-Ray Diffraction Studies On Microstructures in Cu-26.04%Zn-4.01%Al Alloy
HARUN ÇELİK
View PDFchevron_right
Experimental study of the Cu-Al-Sn phase equilibria, close to the copper zone
Delfim Soares
Journal of Mining and Metallurgy, Section B: Metallurgy, 2017
View PDFchevron_right
Liquidus projection and thermodynamic modeling of Sn–Zn–Cu ternary system
Sinn-wen Chen
Journal of Alloys and Compounds, 2009
View PDFchevron_right
Influence of Al and Fe additions on structure and properties of Cu-Sn alloys
Aldona Garbacz-Klempka
Key Engineering Materials Vol. 682 (2016), 226-235
View PDFchevron_right
Microstructure of Cu-Co alloys solidified at various supercoolings
A. Munitz
Metallurgical and Materials Transactions A, 1996
View PDFchevron_right
Cooling thermal parameters, microstructure, segregation and hardness in directionally solidified Al-Sn-(Si;Cu) alloys
Amauri Garcia
Materials & Design, 2015
View PDFchevron_right
Thermodynamic description of the Cu–Ni–Sn system at the Cu–Ni side
Jyrki Miettinen
Calphad, 2003
View PDFchevron_right
Experimental investigation of the effect of solidification processing parameters on the rod spacings in the Sn–1.2wt.% Cu alloy
Prof.dr. Ahmet Ülgen
Journal of Alloys and Compounds, 2009
View PDFchevron_right
Cellular to dendritic transition during transient solidification of a eutectic Sn–0.7wt%Cu solder alloy
Noé Cheung
Materials Chemistry and Physics, 2012
View PDFchevron_right
Effect of titanium on structure and martensic transformation in rapidly solidified Cu–Al–Ni–Mn–Ti alloys
Jerzy Morgiel
Materials Science and Engineering: A, 1999
View PDFchevron_right
ScienceDirect International Congress of Science and Technology of Metallurgy and Materials , SAM-CONAMET 2013 Directional Solidification of SnAg-Cu Alloys
Osvaldo Fornaro
2015
View PDFchevron_right
Thermodynamic description of the Cu–Fe–Sn system at the Cu–Fe side
Jyrki Miettinen
Calphad, 2008
View PDFchevron_right
The isothermal section at 400 °C of the Ce-Cu-Sn ternary system
Paola Riani
Intermetallics, 1997
View PDFchevron_right