Study of Corrosion Rate of Low and Medium Carbon Steel Pressure Vessel in Nigeria Oil and Gas Industry Using Ultrasonic Testing (UT) and Phase Array Ultrasonic Testing (PAUT) Method (original) (raw)
Related papers
Obidimma Ikeh, Obumure Cornelius
E-journal of New World Sciences Academy, 2020
DETERMINATION OF CORROSION RATE AND REMAINING LIFE OF PRESSURE VESSEL
DETERMINATION OF CORROSION RATE AND REMAINING LIFE OF PRESSURE VESSEL USING ULTRASONIC THICKNESS TESTING TECHNIQUE, 2014
Materials Sciences and Applications, 2015
INTERNATIONAL CONFERENCE ON BIOMEDICAL ENGINEERING (ICoBE 2021)
Biuletyn Instytutu Spawalnictwa, 2019
Characterization of Corrosion Behavior of Low Carbon Steel Oil Pipelines by Crude Oil
2016
Application of the Corrosion Tester in Corrosion Tests Using the Acoustic Emission Method
Polish Maritime Research
Evaluation of Corrosion Cost of Crude Oil Processing Industry
Journal of Engineering Science and Technology
An Insight into Studies and Research on Corrosion in Petroleum Industries and Refineries
International Journal of Petroleum and Petrochemical Engineering, 2016
Transstellar Journal , 2019
Ultrasonic Testing for General Corrosion of Metals and Alloys
2016
Investigation of Corrosion Induced Degradation in Oil Pipelines
International Journal of Research & Review (IJRR)
https://www.ijrrjournal.com/IJRR\_Vol.6\_Issue.6\_June2019/Abstract\_IJRR0052.html, 2019
A Review of Ultrasonic Tomography for Monitoring the Corrosion of Steel Pipes
Corrosion problems during oil and gas production and its mitigation
CORROSION CONTROL IN THE OIL AND GAS PRODUCTION – 5 SUCCESSFUL CASE HISTORIES
Corrosion Assessment using Advanced Ultrasonic Measurement Technique
IOP Conference Series: Materials Science and Engineering, 2019
Oil storage tank bottom corrosion evaluation using acoustic emission testing
Seven Editora eBooks, 2023
EKSAKTA: Berkala Ilmiah Bidang MIPA, 2018
Corrosion Behavior of API 5L X80 Steel in the Produced Water of Onshore Oil Recovery Facilities
Materials Research
Corrosion Management and Control in the Petroleum Industry-A Case Study of Kaduna Refinery
Journal of Mechanical and Civil Engineering (IOSR-JMCE), 2018
RESEARCH REGARDING FUNCTIONAL PARAMETERS INFLUENCE ABOUT CORROSION RATE AT CRUDE OIL PIPES
Corrosion Analysis of API 5L Gr. Three Phase Crude
NIPES Journal of Science and Technology Research, 2020
Corrosion damage and periodic inspections on pressure devices and lifting equipments
2015
The study of corrosion behaviour api 5l steel in sea water using immersion test method
2020
Rapid tests of corrosion in corrosion chamber
IOP Conference Series: Materials Science and Engineering, 2018
PIPELINE CORROSION CONTROL IN OIL AND GAS INDUSTRY: A CASE STUDY OF NNPC/PPMC SYSTEM 2A PIPELINE