IRJET- Auto Inflation Tyre System: A review (original) (raw)

IRJET- FABRICATION OF AUTOMATIC TIRE INFLATING SYSTEM

IRJET, 2020

Driven by studies that show that a drop in tire pressure by just a few PSI can result in the reduction of gas mileage, tire life, safety, and vehicle performance, we have developed an automatic, self-inflating tire system that ensures that tires are properly inflated at all times. Our design proposes and successfully implements the use of a portable compressor that will supply air to all four tires via hoses and a rotary joint fixed between the wheel spindle and wheel hub at each wheel. The rotary joints effectively allow air to be channeled to the tires without the tangling of hoses. With the recent oil price hikes and growing concern of environmental issues, this system addresses a potential improvement in gas mileage; tire wear reduction; and an increase in handling and tire performance in diverse conditions KeyWords: Tire, Inflation system, Vehicle Performance, Vehicle Efficiency, Vehicle Safety.

Study of Self Inflating Tyre System

2020

Driven by studies that show that a drop in tyre pressure by just a few PSI(pound per square inch) can result in the reduction of gas mileage, tyre life, safety, and vehicle performance, this study developed an automatic, self-inflating tyre system that ensures that tyres are properly inflated at all times. The design proposes and successfully implements the use of a centralized compressor that will supply air to all four tyres via hoses and a rotary joint fixed between the wheel spindle and wheel hub at each wheel. The rotary joints effectively allow air to be channeled to the tyres without the tangling of hoses. With the recent oil price hikes and growing concern of environmental issues, this system addresses a potential improvement in gas mileage; tyre wear reduction; and an increase in handling and tyre performance in diverse conditions.

AUTOMATIC TYRE INFLATION SYSTEM IN DYNAMIC CONDITION

In today's growing world, the possibilities of road accidents of any automobile are increasing at an alarming rate. The reasons for these happenings are the puncturing of tyres, when the vehicle is at very fast speeds due to any reason and because of that the driver loses his control over the vehicle. Many studies have revealed that a drop in the tyre pressure by a few PSI results in the following: • Reduction in the fuel economy • Reduction of tyre life • Reduces safety and performance of the vehicle We have hence developed an automatic, self-inflating tyre system which will ensure that the tyres are properly inflated all the time. In our design, we have made the use of an air compressor that will store compressed air in an air tank at the desired pressure value which in turn will supply air to all the four tyres through hoses and rotary joint fixed between wheel hub and knuckle of each wheel. The use of rotary joint is to efficiently allow the air to be channelled to all the tyres without the tangling of hoses. With the current environmental issues and fast depletion of natural resources our project will successfully improve the overall fuel economy of the vehicle along with the increased tyre life and improved vehicle handling. KEYWORDS: Tyre and Wheel Assembly, Rotary Joint, Compressor with Air Tank, Pressure Sensor Along with TPMS, Solenoid Valve & Automation System (E. C. U programming)

A Design Approach for Automatic Tyre Inflation System

In ancient time, after the discovery of wheel by man, it has been used extensively for various purposes and it is vital part of human life for ages. These wheels runs human life faster and faster with new technology and one such technology is on board air inflation system used in automobiles. Tyres are the second-highest cost for the trucking industry. The on board air inflation system is used to maintain the pressure of tyres in running condition. The environmental conditions varies according to region, seasons because of this, it require maintaining the tyres pressure for better performance according to conditions. The most important application of this system is in military vehicle. For the military vehicle, the environmental condition, land conditions are continuously varying and they have to face very worst condition like heavy rainfall, snowfall, deserts. At that remote place no such devices are available for maintenances of the tyres. At some crucial times like war conditions or any flood conditions there is no time to filling the air. Thus there arises a need for automatic tyre inflation system. This can be done by employing appropriate technique. This paper deals with the design approach of automatic tyre inflation system.

Design of an automatic tyre pressure inflation system for small vehicles

The advent of the tyre/automotive industry brought to a halt the savage days of long journeying by foot and suddenly introduced quick inter-city visits whilst the traveler is seated. In a bid to improve and perfect this modern way of journeying this paper focuses on the optimization of the automobile, subject matter being the effective and proper maintenance of the tyre so as to curb the disappointment of failing to travel due to underinflated tyres. The design presented in the report herein functions to restore the tyre pressure on vehicles so that they are kept at optimum pressure levels, thus extending their life time at the same time saving the owner from fuel costs and maintenance cost incurred with underinflated tyres. It constitutes of a wind driven turbine-compressor unit which uses drag wind as source of drive to a turbine and quickly converts it to rotational energy which powers a small compressor that feeds the tyre with pressurized air whenever the need arises. The system is monitored and controlled by a Java/Android program which detects low pressure and initiates compressor ON / OFF states. The system is environmentally friendly releasing zero gases and is self-sustaining using independent power source from that of the vehicle itself.

To Study on Implementation of Tyre Inflation System for Automotive Vehicles

The Tire Inflammation System is based on the idea to maintain uniform tire pressure of an automobile and to reduce tire wear, increase fuel efficiency and increased overall vehicle safety.The main working principle of the Tire Inflation System is that the compressed air is passed through the rotary joint into the nozzle fitted in Rim of the Wheel. The rotary joint thus allows the air to flow through itself along with providing the rotary motion of the wheel assembly. Thus the rotary joint makes it possible work out the idea. A compressor is used which gets its power supply from the battery. When the pressure falls below desired level the compressor pumps air through the rotary union to the Tyre and inflates it.

INVOLUNTARY TYRE HEAVINESS DEFLATION ARRANGEMENT

IAEME Publications, 2019

Roads are the most important modes of transport now a days & cars are integral part of it. Tyres lose air through normal driving-especially when run through pot holes & permeation. Moreover, temperature changes are also one of the reason due to which tyres lose air. Thus, vehicles run with an under-inflated tyre which may cause accidents. Studies show that a drop in tire pressure by just a few PSI can result in the reduction of gas mileage, tire life, safety, and vehicle performance. This project aims to develop an automatic, self-inflating tire system. Such a system ensures that tires are properly inflated at all times. Our project design is successfully tested and implemented with help of centralized compressor. The compressor will supply air to all four tires via hoses and a rotary joint fixed between the wheel spindle and wheel hub at each wheel. The Rotary joint is an integral component of the system- which has half of its part rotating with the wheel & rest half part is stationary. Considering today’s ever-increasing environmental threats; oil price hikes & energy consumption our system is most compatible and potential improvement in gas mileage &tyre wear reduction which leads to an increase in performance of Tyre in Diverse Conditions

Design And Fabrication Of Automatic Tyre Inflation And Deflation System ijariie

The main aim of our project is to develop a "Automatic tyre inflation and deflation system" .This can be placed in all automobiles while long drives and that can be utilized while climbing uphill or down hills. It is very necessary for the every automobile to be cautious while driving through long distances. So we have fabricated this machine to fill the air automatically by using contro l units. In this project main function is suddenly the air is decreased to the automobile vehicles the sensor signal alerted to the person when the use of air tank to fill the air in the tyre. Then the air pressure is increased to the tyre in the vehicle i t is same as the process of indicating the sensor signal through the person when the use of solenoid valve to reduce the excess air in the tyre.

A Review: Automatic Tyre Inflanation System

In ancient time, after the discovery of wheel by man, it has been used extensively for various purposes and it is vital part of human life for ages. These wheels runs human life faster and faster with new technology and one such technology is on board air inflation system used in automobiles. Tyres are the second-highest cost for the trucking industry. The on board air inflation system is used to maintain the pressure of tyres in running condition. The environmental conditions varies according to region, seasons because of this, it require maintaining the tyres pressure for better performance according to conditions. The most important application of this system is in military vehicle. For the military vehicle, the environmental condition, land conditions are continuously varying and they have to face very worst condition like heavy rainfall, snowfall, deserts. At that remote place no such devices are available for maintenances of the tyres. At some crucial times like war conditions or any flood conditions there is no time to filling the air. Thus there arises a need for automatic tyre inflation system. This can be done by employing appropriate technique. This project deals with the design and fabrication of automatic tyre inflation system.

Automatic Tire Inflation and Deflation System

Paripex Indian Journal Of Research, 2019

As the existing of tire, from that time it required enhancement continuously done for better performance. As we know a small change in pressure is directly noticeable on the effectiveness, performance, life of tire and performance of vehicle. On a long run of vehicle, due to friction of tire and road, temperature of tire increases so for that pressure of tire also increases. Therefore its cause a tire blowout. So for augmentation, we assemble a machine named "automatic tire inflation and deflation system". The major focus of our project to inflate a tire during low pressure and deflate during high pressure. Other focus of that project is to be provided the limited pressure according to the load and tire wear. In this machine we introduced a laser technology that can be able to check the thickness of tire and according to condition of tire wear it can be able to maintain limited pressure in tire. Under inflated tires also overheat more rapidly than perfectly inflated tires, which cause major tire damage.Among the present environmental issues and fast devolution of natural resources our project will successfully improve the fuel economy of the vehicle along with the maximization tire life and improved Vehicle handling and vehicle performance.