Smart Security System (original) (raw)

DEVELOPMENT OF ADVANCED SMART AND SECURED SYSTEM

A smart system is designed to control the lighting system, fans and security in the industries . We all know sometimes forget to switch off the lights and fans before leaving the room. This system can control 8 units of lights and 6 units of fans every day. Besides, our highly developed industry consist of lot of appliances which needs security and care. Our project focuses on total security with the help of fire alarm and a message alert of any invader. This project uses the Passive Infrared Sensor (PIR sensor) to detect the body heat and the movements of humans. The PIR sensor will give signal to hardware. The hardware of this project is PIC16F887A and RS232 communication module to interface with GSM Modem.

Intelligent Lock Applied for Smart Door

IJCSIS Vol. 17 No. 6 June Issue, 2019

The whole world is moving towards a smarter life, smarter cities and houses. In this paper, we purpose to build a smart door security system to increase the public safety from intruders. The system provides a set of easy and more secure options for the owner to unlock his door; the lock can detect your recorded fingerprint and unlock the door. It can also unlock the door through a set of knocks, the owner can record a specific pattern and once the owner knock on the door the system than will unlock the door if it matches the recorded knock pattern, it also can unlock it through smart phone Bluetooth, this option come in handy if the owner forgets the knock pattern. Moreover, it gives the owner's guests the ability to record a voice message and leave it if he is not at home.

IRJET- SMART DOOR UNLOCKING SYSTEM

IRJET, 2020

Nowadays, home automation is trending as it makes life easier than the conventional systems. In the present world situation people use the traditional lock and key system to secure their houses. As a result of enhanced civilization and modernization, the humans' demands more comfort to their lives. Thus, automatic doors are one of the examples that bring comfort and ease in their daily life. This paper presents a low cost, Internet of Things (IoT) based Smart Door Unlocking System using Raspberry pi where Haar Cascade algorithm is used to detect faces. It is an innovative access control system.

Door Lock Security System Using Recent Technology

International Journal for Research in Applied Science & Engineering Technology (IJRASET), 2022

In terms of house security, the door is pivotal. To keep the hearthstone secure, the proprietor will keep the door locked at all times. Still, owing to a rush when leaving the house, the proprietor may forget to lock the door, or they may be doubtful if they've closed the door or not. Wireless security grounded operation have fleetly increased due to the dramatic enhancement of ultramodern technologies. Numerous access control systems were designed and/or enforced grounded on different types of wireless communication technologies by different people. Radio Frequency identification (RFID) is a contactless technology that's extensively used in several diligences for tasks like access control system, book shadowing in libraries, tollgate system, forced chain operation, and so on. For enforcing this design, we will be using Arduino mega 2560 pro mini, a fingerprint sensor, Keypad module. ESP-32 CAM module, RFID sensor, solenoid lock and ESP8266. We have also created an application for monitoring and controlling the security features of the door lock. We can also open the door through mobile fingerprint.

Design and Implementation of Smart Home Security System

All over the world, security has been a major concern in every home. Automated security systems are a useful addition to todays home where safety is an important issue. Vision-based security systems have the advantage of being easy to set up, inexpensive and non-obtrusive. Here, a security system has been developed that uses sensors to detect any security violation and sends out the alert signal by high intensity Buzzer. In this paper it has been ensured three level security systems. NFC tag use, providing Password and PIR motion sensor. To open the door a person should provide NFC tag and password. If one of them absence the door will not open. The door will opened by servomotor with a lock coupled in its shaft. When wrong password is pressed, error text is displayed in the LCD. When an authorized person leaves the door, he has to show his tag in the reader. Otherwise the door will not close. Now if an unwanted man enters the room by password breaking or without NFC the PIR sensor works .It sounds the buzzer. NFC card reader, PIC 16F877A, Arduino Uno, PIR sensor is used for this project .So, maximum security will be maintained in home. This security can be applied not only home but also the place where important document, file are preserved also the bank vault.

IRJET- Smart Door System

IRJET, 2020

This project is about a smart door system using face recognition based on Raspberry pi. Smart door system has been launched for many years but most of them are just a CCTV, IP camera or door sensor alert system. It could be more efficient with uses of face recognition. The design of smart door system is based on human face recognition and remote monitoring technology. It will verify the person identity that goes near to the camera within certain distance. Only the people who match the identity with database and key in the correct password have the right to entry. A mobile application telegram and image processing technique LBP based have been involved in this system. Electric door lock solenoid. Also, Smart home automation system is a web-based application that allows user to monitor home appliances using mobile devices. This system established for the entire home user after gaining access from administrator. This system includes remote control home appliances, security. Once all the appliances in home are automated and connected it important to consider issue of security authentication and access control.

“SMART DOOR LOCK” : Anti-Sabotage Door Security System for Restricted Room

2017

Security systems for sensitive room such as central control room, IT room, and research and development laboratory is very important to avoid asset losses. The existing technology which widely applied in a lot of corporate like Radio Frequency Identification (RFID) and fingerprint have some weaknesses. RFID chip is susceptible to system disturbance which caused by frequency spreaded from gadget or other device surround. Then, fingerprint sensor system cannot detect wet, dirty, or peeled off fingers. To solve the problem, this research develop modern technology called by Smart Door Lock. This systems consists of electronic locker based on microcontroller technology with solenoid locker as the actuator, “Smart Lock” Android application and database system for user management. The locker can be controlled by Android application using bluetooth communication and Login system to lock or unlock the door within 2 up to 5 seconds for pairing session with maximum distance 9 meters. There are...

Smart Door Lock System with Automation and Security

2017

Dept. of Computer and Information Systems Engineering, NEDUET, Karachi, Pakistan {*ibshar.ishrat@gmail.com, wajihamuzaffarali@gmail.com, sanaghani94@yahoo.com, sadia_sami@ymail.com} {mariaw@neduet.edu.pk, 2 fakhraaftab@neduet.edu.pk} ABSTRACT: This paper presents the design of Smart Door Lock System with Automation and Security an implementation of IoT (Internet of Things). The system allows the users to monitor and control their homes using the Android device. This system is designed mainly for home door locks; this design can be customized for different kinds of locks as per the need. It uses Raspberry pi as the main device with Raspbian as the operating system to be installed near the lock. Different sensors have been interfaced to detect door bell and knock. It also notifies if any suspicious person is sensed. The system also keeps track of the door status i.e. opened or closed. It notifies the user of the visitor or the suspicious person detected through the mobile application ...

Smart Door Monitoring and Locking system

IRJET, 2022

Protection, security, and safety are the most important things in our daily life. These days, the advancement of Technology has evolved into one of the leading IoT-based projects such as smart home technology. For An instance, this type of system makes livelihood more safe, convenient, and secure. people are more familiar with these technologies nowadays and smart home applications provide a controlled way of action just within the tip of a finger, for example, managing the schedules for home lightning, electricity bills, groceries list, and home security as well. the facial and fingerprint recognition of authorized persons is well established to keep the homes more secured for accessibility. A setup of a display monitor connection with the camera in front of the door is also required to send the information to the owner who is trying to enter his house through that door and the owner has the right to give access to the person who wants to open the door. Even we can provide voice lock by texting voice with raspberry pi arm processor which can revert any messages to the owner. To satisfy all these needs we came up with a new solution that is more secure, reliable, looks, and works smart. For this, we used a raspberry pi microcontroller linked with a biometric sensor for fingerprint recognition and a camera module for capturing the user image and used a bot in telegram for communication like sending alert messages and receiving commands from the owner.

Development of Automated Room Security System

—The work on " Development of automated room security system " using Microcontroller is a reliable circuit that takes over the task of security of a room very accurately. When somebody enters into the room then the count will be incremented by one and the set limit is checked, if the count is less than the set limit then the door opens and the person is granted access. When any one leaves the room then count will be decremented by one. If the total count exceeds the set limit then the buzzer is sound and the image of the person trying to enter the room is captured via a camera. The microcontroller does the above job. It receives the signals from the sensors, and this signal is operated under the control of software which is stored in ROM. 89s51Microcontroller continuously monitor the sensors, an IR Sensor sends signal to the microcontroller , to increment or decrement the count accordingly. The system includes IR sensor, microcontroller, LCD, display, buzzer, camera and a 12v power is supplied to run the system. The system uses a compact circuitry built around 89s51 microcontroller programs are developed in Embedded C. Keywords—89s51 microcontroller, Infrared sensors (IR sensors), LCD display, Embedded C.