Effects of weld strength mismatch on J and CTOD estimation procedure for SE(B) specimens (original) (raw)

Effects of Weld Strength Mismatch on Ctod and J Estimation Procedures Applicable to Clamped Se (T) Specimens Containing Square Groove Welds with Center Cracks

Prof. Gustavo H. B. Donato

View PDFchevron_right

IMPROVED J AND CTOD ESTIMATION FORMULAS FOR C(T) FRACTURE SPECIMENS INCLUDING OVERMATCHED WELDMENTS PVP2011-57030

Rafael Savioli

View PDFchevron_right

Crack tip constraint analysis in welded joints with pronounced strength and toughness heterogeneity

Wim De Waele

Theoretical and Applied Fracture Mechanics, 2019

View PDFchevron_right

Characterization of crack tip stresses in plane-strain fracture specimens having weld center crack

R K Singh

International Journal of Solids and Structures, 2014

View PDFchevron_right

Effect of fracture path on the toughness of weld metal

N. Gubeljak

International journal of fracture, 2002

View PDFchevron_right

Fracture toughness measurements using two single-edge notched bend test methods in a single specimen

Jean-Philippe Gravel

Engineering Fracture Mechanics, 2015

View PDFchevron_right

Determining the fracture toughness of welds in sheet steel

zul kifli

Strength of Materials, 1975

View PDFchevron_right

Plastic limit load and its application to the fracture toughness testing for heterogeneous single edge notch tension specimens

Marcelo Paredes

View PDFchevron_right

Yield Load Solutions for SE(B) Fracture Toughness Specimen with I-Shaped Heterogeneous Weld

Marko Katinić

Materials

View PDFchevron_right

Crack tip opening displacement (CTOD) in single edge notched bend (SEN(B))

Weeliam Khor

2018

View PDFchevron_right

Experimental and Numerical Analysis for Se(B) and Se(T) J-Integral Fracture Toughness Testing

Itamar Ferreira

2005

View PDFchevron_right

Fracture Assessments of Welded Structures

Tina Panontin

2000

View PDFchevron_right

The effect of yield strength mis-match on the fracture analysis of welded joints: slip-line field solutions for pure bending

Su Hao

International Journal of Solids and Structures, 2000

View PDFchevron_right

The Use of a Non-conventional Fracture Mechanics Parameter for Estimating SN Curves of Welded Joints

Alexandre Francisco

Procedia Materials Science, 2015

View PDFchevron_right

Application of fracture mechanics for weld integrity assessment

Soumitra Tarafder

Sadhana, 1995

View PDFchevron_right

Validation of a Fracture Mechanics approach for the fast fracture evaluation of Dissimilar Metal Welds

Arnaud Blouin

View PDFchevron_right

Fracture Toughness Characterization of High-Pressure Pipe Girth Welds Using Single-Edge Notched Tension [SE(T)] Specimens

Timothy Weeks

View PDFchevron_right

Influence of Weld Strength Mismatch on Crack Length Measurement Using Compliance Technique

R K Singh

Procedia Engineering, 2014

View PDFchevron_right

C * estimation for cracks in mismatched welds and finite element validation

Xuân Tùng

International Journal of Fracture, 2004

View PDFchevron_right

J-integral fracture toughness assessment of specimens containing dissimilar metal welds

Oriol Costa Garrido

2015

View PDFchevron_right

Dynamic fracture toughness properties of a 9Cr---1Mo weld from instrumented impact and drop-weight tests

P R SREENIVASAN

International journal of …, 1996

View PDFchevron_right

Influence of crack on welded joint characteristics in different types of loads

Vencislav Grabulov

Scientific Technical Review

View PDFchevron_right

Comparison of girth weld tearing resistance obtained from Curved Wide Plate and Single Edge Notch Tensile testing

Wim De Waele

Engineering Fracture Mechanics, 2015

View PDFchevron_right

Two Parameter Engineering Fracture Mechanics: Calculation of the Relevant Parameters and Investigation of Their Influence on the Surface Notch

Mohamed Hadj-meliani

NATO Science for Peace and Security Series C: Environmental Security, 2011

View PDFchevron_right

An insight of the structure of stress fields for stationary crack in strength mismatch weld under plane strain mode-I loading—Part I: Pure bending specimen

R K Singh

International Journal of Mechanical Sciences, 2012

View PDFchevron_right

Toughness evaluation of EB welds

Norbert Enzinger

Welding in the World, 2017

View PDFchevron_right

Effect of Welding Residual Stresses on Crack Opening Displacement and Crack-Tip Parameter

jens gunnars

2009

View PDFchevron_right

Effect of crack length on fracture toughness of welded joints with pronounced strength heterogeneity

Wim De Waele

Procedia Structural Integrity, 2018

View PDFchevron_right

Fracture Mechanics Analysis of Heterogeneous Welds: Validation of a Weld Homogenisation Approach

Wim De Waele

Procedia Materials Science, 2014

View PDFchevron_right

Effects of weld strength mismatch on J and CTOD estimation procedure for SE(B) specimens (original) (raw)

Related papers