Towards Efficient Waste Management in Latvia: An Empirical Assessment of Waste Composition (original) (raw)
Related papers
ISWA Conference, 2016
In many EU member states as well as in many non EU countries, waste management is one of the most important environmental issues, and one of the most challenging areas in terms of compliance with the standards of the European Union (EU) either in upgrading their existing waste management system. Solving these problems and moving towards integral and modern waste management are among the environmental priorities of Armenia, Croatia, Cyprus, FYROM and Ukraine. ENVIROPLAN S.A. is a company actively involved in the implementation of waste management projects since 1990 in many EU and non EU countries (i.e. Greece, Turkey, Armenia, Croatia, Cyprus, FYROM, Ukraine etc). A critical milestone in the successful elaboration of such projects is the collection and identification of the current situation, and one significant component of it, regards the qualitative characterization of the generated Municipal Solid Waste (MSW). The aim of this paper is to present the methodological approach of surveys for Municipal Solid Waste composition analysis implemented by ENVIROPLAN S.A. in relevant waste management projects in Armenia, Croatia, Cyprus, FYROM and Ukraine, as well as the respective results.
Comparative analysis of municipal solid waste
2015
The increase in the amount of waste is a concern for many countries in the world. Accumulation of municipal solid waste (MSW) threatens to become a global problem for Ukraine. Recently only one incineration plant is functioning in the country giving heat energy for heating and hot water supply to the Kiev district heating system. European principles of waste management laid the basis for a National waste management strategy in Ukraine till 2030, approved by the Cabinet of Ministers of Ukraine [2]. The Strategy defines the basic directions on state regulation in sphere of waste treatment with taking into account the EU approaches on waste management [4]. The Strategy determines also priorities of development in secondary use for material and energy resources of wastes components. According to Strategy 5,000 centers for separate collection MSW, 250 centers for reuse, about 800 MSW processing plant and 20 waste-to-energy plants are to be built by 2030. For the Strategy implementation the National Waste Management Plan is being developed. By 2020 the regional centers should develop regional plans on wastes management. Now the local administrations are working on local programs of MSW management. The selection of MSW management system should be based on studying of social and demographic situation in each settlement, volume and MSW composition, ecological and energy characteristics of MSW components. After analysis of the current situation an optimum system for collection, processing and waste removal is accepted. For the system implementation should revising the practical means. This paper shows the composition analysis as to the
Assessment of changes in the municipal waste accumulation in Poland
Environmental Science and Pollution Research
The aim of the work was to assess the effectiveness of municipal waste management in Poland over the period 2012–2017, considering the accumulation of waste collected selectively and non-selectively per capita and the changes resulting from the implementation of Directives 1999/31/EC and 2008/98/EC in Polish legislation. Within 6 years, noticeable changes in the country initiated by the EU and national legislation indicated an increase in the amount of waste to be recovered. However, the achieved efficiency of limiting the deposited waste at the level of 20% was moderate, despite the existence of infrastructure allowing for increased recovery. The analysis of the efficiency of waste management showed a certain convergence of the increase in the amount of generated waste and gross domestic product (GDP). On the other hand, the increase in accumulated organic waste per capita in all three dimensions of time was the most significant and exceeded 20%.
A Comparative Analysis of Municipal Waste Management Systems
Polish Journal of Environmental Studies, 2016
Waste management is important in the activities of local authorities. Therefore, attention to waste management is reflected in the nature of a commune. The system analysis of chosen waste management is significant due to the need to improve the activities undertaken to achieve the best results. The aim of such a work was a comparative analysis of the efficiency of waste commune systems in two local government units within the Małopolska region of Poland. The subjects of comparative analysis of waste management systems were two selected communes of different sizes located within the same county. The study included the quantity and quality of collected municipal waste and indicators of their accumulation in 2007-10. On the basis of the conducted analysis that the inhabited commune had a larger number of inhabitants and with a larger surface area, the waste disposal was carried out more frequently by a substantial amount of subjects. The commune has also identified significantly more than 3.5 times the average of total waste. In both communities and regardless of the noted differences a growing trend of the quantities selectively waste collected were about 32% lower in the commune with fewer inhabitants, in which waste collection of paper and cardboard generated no result. Generally conducted in both communes, recovery contributed for favorable weight limitations the assembled waste on an average of 30 %. Dealt with in the period of waste accumulation indicators begins to differentiated an average increase of 14 kg·person-1 ·year-1 , and 2 Mg·km-2 in favor of more commune. As significant was in the municipality of year 2009, in which it were achieved the highest values of amounts of the collected the and sent to the assembled waste, the highest indicators of waste accumulation, in despite of made note the highest number of inhabitants in the next year.
The aim of this paper is to determine the level of unused potential for material recovery of the components of municipal waste and to give an overview of the current situation in the Republic of Croatia regarding the achievement of the European quantitative target for recovery of municipal waste. The data analyses were conducted for separately collected amounts of waste paper, plastics, metals, glass, textiles and biowaste from the household municipal waste in the period 2011 -2015 for 556 local self-government units which were then grouped into 5 regions. Municipal waste which originated from commercial sector in 2015 was additionally allocated to local self-government units. For the analysis of achievement of the European quantitative target regarding material recovery, 2015 was taken as the baseline year and covered both household and commercial municipal waste. The results show that in all analysed regions the remaining unused material recovery potential of municipal waste is exceptionally high, especially when considering unused potential of municipal waste managed by local self-government units (household waste without commercial sector). The regions with the highest utilization of resources from municipal waste (households and commercial sector) are City of Zagreb and Northwestern Croatia, followed by Coastal and Mountain Croatia while Dalmatia region and Eastern Croatia have the lowest utilized potential from municipal waste. If separate collection and material recovery, as observed in 2015, continue in the upcoming years, the defined target will not be met within the set deadline. It is necessary to increase utilisation of material recovery potential of all analysed waste flows in all the analysed regions.
Construction industries waste circulation problems in Latvia
22nd International Scientific Conference Engineering for Rural Development Proceedings
Construction is crucial for the development of a country, it affects both individuals and the whole society’s life, as well as the environment. As construction is so crucial, it must be done as environmentally friendly as possible. During construction processes, a large amount of waste is produced. Incorrect management of this waste degrades our environment. Disposal of construction waste is a very popular way, but it is not a very environmentally friendly way of managing this waste. Interviews and surveys have been conducted in the study to investigate the opinion of construction participants about construction waste in Latvia. The research uses the theoretical research method, survey, interviewing, and data processing methods. Construction waste can be recycled. In construction in Latvia, legal requirements are observed, and construction waste is mostly handed over to processing companies, where a part is sorted. The processing and reuse of construction waste are relatively small....
Monitoring of municipal waste generated in the City of Warsaw
Waste Management & Research, 2012
Waste management in the new EU member states is currently undergoing rapid development in order to comply with the European legislation. In Poland there is a lack of capacity of waste treatment installations for residual waste which amounts to 5.5 million tonnes year −1 . Detailed data on waste generation is needed to design new installations and ensure their efficient operation. This paper presents the results of the monitoring of municipal waste generation in Warsaw, being one of the largest agglomerations in the region. Detailed quantitative and qualitative results for both household and institutional waste are provided, as well as the technological properties of the household waste. The amount of municipal waste generated per capita amounted to 390 kg year −1 . The main fractions contributing to the mixed household waste were: biodegradable kitchen waste, packaging plastics, non-packaging paper and cardboard, packaging glass and packaging paper and cardboard. The coarse fraction (> 100 mm) constituted 40% of total household waste, of which the majority were recyclables. The lower heating value of residual waste was sufficient to allow mass incineration. Data on historical developments of household waste quantities and composition since the year 2000 along with their estimates until the year 2020 are provided and discussed. Current problems of municipal waste management in Warsaw along with the proposed future solutions are briefly outlined.
Municipal solid waste experimental studies in Romania and Bulgaria
The project Balkwaste (www.balkwaste.eu) is a LIFE+ project financed by the European Commission for the period of 2009. The project aim is to promote sustainable waste management planning in the Balkan region as well as to develop an integrated decision support software (DSS) tool, which will allow competent authorities to assess various waste treatment scenarios. In order to achieve the objectives of the project, sorting and laboratory analyses were performed on municipal solid waste samples collected in Romania and Bulgaria. The results will be used as input in the DSS in order to draft waste management plans for the case study areas selected. Two sampling campaigns took place during November-December 2009 and May 2010 and the study presents the results both in terms of waste composition and physicochemical properties. The gross results of in Bulgaria and Romania are: plastic 9,2% and 12,5%, paper 7,3% and 11,1%, metals 0,8% and 1,1%, glass 4,4% and 3,5%, textile 2,7% and 3,0%, wood 1,6% and 0,8%, construction and demolition waste 15,8% and 8,6%, WEEE 0,0% and 0,2% and organic waste 58,3% and 59,2%, respectively. The materials suitable for recycling (plastic, paper, metals, glass, textile and wood) in Bulgaria and Romania are 28,3% and 29, and the material suitable for combustion (residual plastic, paper, textiles and wood) 7,6% and 8,3% respectively. The physicochemical analyses have shown that the composite sample (after the removal of the suitable recyclables) is not adequate while the combustible sample (residual plastic, paper, textiles and wood) exhibits excellent characteristics for incineration process.
CHARACTERISATION AND COMPOSITION OF MUNICIPAL SOLID WASTE -A CASE STUDY
Municipal Solid Waste Management (MSW) involves activities associated with generation, storage, collection, transfer & transport, processing, recovery and disposal of solid waste, which are environmentally compatible adopting principles of economy, aesthetics, energy and conservation. For efficient disposal method it is necessary to characterize the waste. In this study, the composition and characterization of waste from a Municipal town waste were estimated and tested for better management. The composition was estimated by segregating it into different components, i.e., food waste, leaves, paper, cloth, rubber, glass, metals etc, these components were categorized into biodegradable and non-biodegradable waste. It was observed that the waste contains around 61% biodegradable waste, and the remaining is non-biodegradable waste. Ten samples were characterized for their physico-chemical properties. The analysis indicated that the biodegradable content of MSW is a good source of compost for agriculture purpose whereas non biodegradable content can be used for recycles, reuse or landfill.