Analysis of pellet diameter and inorganic filler influences on the polymer melting behavior in planetary roller extruders (original) (raw)
Melting of polymer blends in single-screw extrusion - An experimental study
António Gaspar-cunha
International Journal of Material Forming, 2009
View PDFchevron_right
Melting of PP/PA6 Polymer Blends in Single Screw Extruders – An Experimental Study
José Covas
Materials Science Forum, 2008
View PDFchevron_right
Investigation of the temperature homogeneity of die melt flows in polymer extrusion
Dr Chamil Abeykoon
Polymer Engineering & Science, 2013
View PDFchevron_right
In-line assessment of the melting behaviour during polymer extrusion
Sebastião V Canevarolo
View PDFchevron_right
Melt temperature consistency during polymer extrusion
Farhan Raza
View PDFchevron_right
A Combined Experimental and Modeling Study for Pellet-Fed Extrusion-Based Additive Manufacturing to Evaluate the Impact of the Melting Efficiency
Rudinei Fiorio
Materials, 2021
View PDFchevron_right
Evolution of Chemistry, Morphology and Rheology of Various Polymer Systems along a Twin-Screw Extruder
João Maia
The Canadian Journal of Chemical Engineering, 2002
View PDFchevron_right
Investigation of Correlations between Process Thermal Stability and Energy Demand in Polymer Extrusion
Dr Chamil Abeykoon
View PDFchevron_right
Thermal and mechanical degradation during polymer extrusion processing
luciana sartore
Polymer Engineering & Science, 2007
View PDFchevron_right
Process efficiency in polymer extrusion: Correlation between the energy demand and melt thermal stability
Dr Chamil Abeykoon
Applied Energy, 2014
View PDFchevron_right
A study of polycarbonate/ poly(butylene terephthalate) compounding in a twin screw extruder
Hasan Tareque
Masters Abstracts International, 2009
View PDFchevron_right
Experimental and analytical study of the polymer melt flow through the hot-end in material extrusion additive manufacturing
Marcin Serdeczny
Additive Manufacturing, 2020
View PDFchevron_right
The melting performance of single screw extruders. II
Han Meijer
Polymer Engineering and Science, 1981
View PDFchevron_right
Investigation of the barrel temperature profile on the process behavior of single screw extruders and strategies to determine the optimal temperature control
Volker Schöppner
PROCEEDINGS OF PPS-33 : The 33rd International Conference of the Polymer Processing Society – Conference Papers
View PDFchevron_right
Dynamic modelling of die melt temperature profile in polymer extrusion: Effects of process settings, screw geometry and material
Dr Chamil Abeykoon
Applied Mathematical Modelling, 2014
View PDFchevron_right
Design, Simulation, and Analysis of the Extrusion Process of a PVC Thermoplastic Profile to Optimize the Design of the Die and the Machine Parameters
Carlos Tomassini
Fiber-Reinforced Plastics [Working Title], 2022
View PDFchevron_right
Characterization of polymer melt behavior using a twin-screw extruder, operating as an internal rheometer
Sebastião V Canevarolo
View PDFchevron_right
Dynamics of Filler Size and Spatial Distribution in a Plasticating Single Screw Extruder – Modeling and Experimental Observations
José Covas, António Gaspar-cunha
International Polymer Processing, 2010
View PDFchevron_right
Extrussion Processing Analysis for Thermoplastics
Ian Widi Perdana
View PDFchevron_right
Thermal homogeneity and energy efficiency in single screw extrusion of polymers. The use of in-process metrology to quantify the effects of process conditions, polymer rheology, screw geometry and extruder scale on melt temperature and specific energy consumption
Javier Vera Sorroche
2014
View PDFchevron_right
Analysis and simulation of the melting behavior of polymer materials in co-kneaders
Peter Heidemeyer
2017
View PDFchevron_right
Analytical and Numerical Models of Thermoplastics: A Review Aimed to Pellet Extrusion-Based Additive Manufacturing
Alessio Pricci
Polymers
View PDFchevron_right
A study of polymer melt flow instabilities in extrusion
Ronald Lamonte
Polymer Engineering and Science, 1971
View PDFchevron_right
Theoretical Evaluation of the Melting Efficiency for the Single-Screw Micro-Extrusion Process: The Case of 3D Printing of ABS
Rudinei Fiorio
Processes, 2020
View PDFchevron_right
Thermal optimisation of polymer extrusion using in-process monitoring techniques
P. Coates
Applied Thermal Engineering, 2013
View PDFchevron_right
A Study on Polymer Particle Flow in a Disk Zone of a Screw-Disk Extruder
Tomasz Rydzkowski
Chemical and Process Engineering, 2014
View PDFchevron_right
Modeling and Experimental Studies on Polymer Melting and Flow in Injection Molding
Kamila Buziak
Polymers
View PDFchevron_right
Extrusion of metal powder-polymer mixtures: Melt rheology and process stability
Francesco Briatico-vangosa
Journal of Materials Processing Technology, 2019
View PDFchevron_right
Polypropylene Degradation on Co-Rotating Twin-Screw Extruders
Sven Wanke
Polymers
View PDFchevron_right
Thermomechanical analysis and modeling of the extrusion coating process
Cyrille Sollogoub
Polymer Engineering & Science, 2008
View PDFchevron_right
Numerical simulation of a single-screw plasticating extruder
John Vlachopoulos
Polymer Engineering and Science, 1982
View PDFchevron_right
Gelation of poly(vinyl chloride) inside a single screw extruder and its effect on product properties
Abdullah Demirci
Journal of Vinyl and Additive Technology, 2018
View PDFchevron_right
Effect of Nature and Amount of Polypropylene Composite Filler on the Productivity of Extruder with the Cylinder Equipped with Grooves
Janusz Sikora
Advances in Science and Technology Research Journal
View PDFchevron_right
Influence of molecular parameters on material processability in extrusion processes
Ica Manas-zloczower
Polymer Engineering & Science, 1999
View PDFchevron_right
Analysis of process parameters related to the single-screw extrusion of recycled polypropylene blends by using design of experiments
Liberato Mascia
Journal of Plastic Film & Sheeting, 2016
View PDFchevron_right