Implementation of Basic and Universal Gates In a single Circuit Based On Quantum-dot Cellular Automata Using Multi-Layer Crossbar Wire (original) (raw)
Related papers
Nanoarchitecture of Quantum-Dot Cellular Automata (QCA) Using Small Area for Digital Circuits
Advanced Electronic Circuits - Principles, Architectures and Applications on Emerging Technologies
Novel digital technologies always lead to high density and very low power consumption. One of these concepts-quantum-dot cellular automata (QCA), which is one of the new emerging nanotechnologies, is based on Coulomb repulsion. This chapter presents a novel design of 2-input Exclusive-NOR (XNOR)/Exclusive-OR (XOR) gates with 3-input Exclusive-NOR (XNOR) gates which are composed of 10 cells on 0.006 μm 2 of area. A novel architecture of 3-input Exclusive-OR (XOR) gate is defined by 12 cells on 0.008 μm 2 of area. The proposed design of 2-input XOR/XNOR gate structures provide less area and low complexity than the best reported design. The simulation results of proposed designs have been achieved using QCA Designer tool version 2.0.3.
Logic Circuit Design in Nano-Scale using Quantum-Dot Cellular Automata
European Journal of Scientific Research
One of the emerging technologies that being investigated as an alternative to CMOS VLSI is Quantum-Dot Cellular Automata (QCA). Its advantages such as faster speed, smaller size, and lower energy consumption are very good-looking. Unlike conventional digital circuits in which information is transferred using electrical current, QCA transfers information by propagate a polarization state. This paper proposes a detailed design analysis of combinational and sequential logic circuits for quantum-dot cellular automata. The aim is to maximize the circuit density and focus on a layout that is minimal in its use of cells.
International Journal of Advanced Computer Science and Applications, 2017
Novel digital technologies always lead to high density and very low power consumption. One of these concepts is Quantum-dot Cellular Automata (QCA), which is one of the new emerging nanotechnology-based on Coulomb repulsion. This article presents three architectures of logical "XOR" gate, a novel structure of two inputs "XOR" gate, which is used as a module to implement four inputs "XOR" gate and eight inputs "XOR" gate using QCA technique. The two inputs, four inputs, and eight inputs QCA "XOR" gate architectures are built using 10, 35, and 90 Cells on 0.008 µm 2 , 0.036 µm 2 and 0.114 µm 2 of areas, respectively. The proposed "XOR" gate structure provides an improvement in terms of circuit complexity, area, latency and type of cross wiring compared to other previous architectures. These proposed architectures of "XOR" gate are evaluated and simulated using the QCADesigner tool version 2.0.3.
Study and Analysis of 3 -Input Logic Gates By Using Quantum Dot Cellular Automata
2019
Quantum dot cellular automata (QCA) is growing technology with Nano range scale in that, QCA is extremely computational and exceptionally productive than CMOS technology. QCA the parameters like area and usage of power are very less when compared to CMOS technology. In the comparative analysis of QCA and CMOS technologies, the number of quantum cells used and the number of transistors taken place to design 3 input logic gates. In this paper, it explains about the comparison between CMOS and QCA technologies for 3 input basic logic gates like AND, OR, NOT, NAND, NOR ,XOR and XNOR by utilizing the ultra-low power and the area, time taken to outline the circuit with quantum dot cells in QCA technology. From the results, area utilized to design logic gates using by QCA technology as compared to CMOS technology is reduced up to 5%.
Quantum Dot Cellular Automata: A Novel Circuit Design Approach
As an alternative to CMOS technology, researchers have proposed new technologies like FINFET, CNTFET, MTJ to improve the performance of the system. This paper presents some emerging technologies over CMOS-VLSI. Also the new polarization based digital logic design with quantum dots called Quantum dot Cellular Automata i.e. QCA is described here. In this new computing paradigm QCA cell is the fundamental unit to design logic structure in quantum domain. This technology achieves an effective design of logic circuits using QCA. In this paper basic QCA structures are designed with minimum number of QCA cells and with minimum complexity. So these structures can be used to design and simulate complex circuits in digital system. The simulation of the present work is done by QCA designer tool which facilitate rapid and accurate simulation.
Design of a New Optimized Universal Logic Gate for Quantum-Dot Cellular Automata
IETE Journal of Research, 2019
In this paper, the design of a novel efficient QCA-based universal logic gate (ULG) is presented. Compact and efficient implementation layout with only one clock phase delay and also the implementation of the 13 standard functions without extra ULG or gate are the advantages of the proposed ULG. The results show that the proposed ULG is an efficient tool in designing any QCA circuit. Also, an accurate artificial neural network (ANN) model of the proposed ULG is presented. This model can be simply imported into any circuit simulators such as HSPICE, MATLAB Simulink and etc., for modeling and simulation of QCA circuits at the Gate level with high precision in a short time.
A Solution to VLSI: Digital Circuits Design in Quantum Dot Cellular Automata Technology
2023
Quantum Dot Cellular Automata is a Nano device efficient than other devices in nanotechnology for the last two decades. It is beneficial over Complementary Metal Oxide Semiconductor technology like high speed, low energy dissipation, high device density and high computation efficiency. To achieve further optimization different methods like simplifications in Boolean expressions, tile method, clocking scheme, cell placement, cell arrangement, novel input techniques, etc., are in use. These methods improve the performance metrics in terms of QCA Cells, total circuit area, delay in output, power consumption, and coplanar or multilayer layout. This paper is about the novel NOT gate layout designed with efficient parameters compared to existing NOT gates except area parameters with analysis and XOR gate and multiplexer circuits. The novel gate provides an improvement of 55% in the number of cells, polarization raised by 0.33, and an 80.77% improvement in total area. These circuits illustrate further scope in QCA circuit design efficiently. XOR circuit shows area reduction up to 0.006 μm2 with 0.5 clock cycle delay. Further optimization in XOR parameters and with this novel NOT gate researchers can optimize parameters to bring revolution and digitalization.
Basic Logic Gate Realization using Quantum Dot Cellular Automata based Reversible Universal Gate
International Journal of Computer Applications, 2012
Quantum-dot Cellular Automata is a new technology for development of logic circuits based on nanotechnology, and it is an one of the alternative for designing high performance computing over existing CMOS technology. The Research on reversible circuits is going on both VLSI and QCA based design due to low power consumption. In this paper we are presenting basic logic gate design using Reversible universal gate and also presenting the effectiveness of Reversible Universal Gate(RUG) by comparing it with other reversible gates.
2019
QCA is a modern transistor-less computational paradigm in nanotechnology, which encodes digital binary information via configuration of charges among quantum dots. The nanostructure’s “Quantum dots” is a liberal of promises nanotechnology for implementation of digital mode on the nanoscale in nanometer (nm), based on cells of coupled quantum dots. It is a highly intensifying nanotechnology that has very fast switching speed and power consumption extremely low as compared to transistor technique. We have implemented the novel Exclusive-OR gate using QCA technology, with designs having significant improvement in layout of quantum cell used area, latency, and power as compared to past idea. The proposed novel XOR layout based on quantum-dot cell used only 17 cells, 0.03 μm2, and latency of 0.25 clock cycles. These layouts are designed and simulated by QCA designer Version-2.0.3 tool, by taking unique features and many advantages of the nanotechnology; the complete layout circuits desig...
Applications of toffoli gate for designing the classical gates using quantum dot cellular automata
Quantum dot Cellular Automata (QCA) is an emerging technology for development of logic circuits based on nanotechnology, and is one of the alternative for designing high performance computing over existing CMOS-VLSI technology. QCA does not use voltage level for logic representation rather it represents binary state by polarization of electrons in the QCA Cell. Conventional logic circuits are irreversible in nature and always lead to energy dissipation. Thus extensive research is going on to design the circuits which does not dissipation the energy and hence will not loose the information. In this paper we have designed the QCA based toffoli gate and then implemented the basic logic gates with it. The circuits were successfully simulated and verified by QCA Designer tool.