Accurate determination of catalyst loading on glassy carbon disk and its impact on thin film rotating disk electrode for oxygen re-duction reaction (original) (raw)
Related papers
Electrochimica Acta, 2008
The aim of this report is to scrutinize the thin-film rotating disc electrode (TF-RDE) method for investigating the electrocatalytic activity of high surface area catalysts. Special emphasis is given to the oxygen reduction reaction (ORR) on carbon-supported platinum catalysts. On the basis of measurements on four different Pt catalyst samples with various average particle sizes, it is demonstrated in detail how the intrinsic properties of the catalyst, i.e., the mass activity (A/g Pt ) and the specific activity (A/m 2 Pt ), are evaluated. The potential sources of error are critically discussed and guidelines for the measurements are given. Furthermore, the specific ORR activities determined for the different catalyst samples are analyzed and compared to polycrystalline Pt. The previously reported effect of the particle size on the specific activity for the ORR is interpreted on the basis of the shift in the potential of zero total charge and the concomitant alteration of the adsorption properties.
Journal of The Electrochemical Society, 2015
The rotating disk electrode (RDE) technique is being extensively used as a screening tool to estimate the activity of novel PEMFC electrocatalysts synthesized in lab-scale (mg) quantities. Discrepancies in measured activity attributable to glassware and electrolyte impurity levels, as well as conditioning, protocols and corrections are prevalent in the literature. The electrochemical response to a broad spectrum of commercially sourced perchloric acid and the effect of acid molarity on impurity levels and solution resistance were also assessed. Our findings reveal that an area specific activity (SA) exceeding 2.0 mA/cm 2 (20 mV/s, 25 • C, 100 kPa, 0.1 M HClO 4) for polished poly-Pt is an indicator of impurity levels that do not impede the accurate measurement of the ORR activity of Pt based catalysts. After exploring various conditioning protocols to approach maximum utilization of the electrochemical area (ECA) and peak ORR activity without introducing catalyst degradation, an investigation of measurement protocols for ECA and ORR activity was conducted. Down-selected protocols were based on the criteria of reproducibility, duration of experiments, impurity effects and magnitude of pseudo-capacitive background correction. Statistical reproducibility of ORR activity for poly-Pt and Pt supported on high surface area carbon was demonstrated.
Catalysts
Detailed studies of the electrochemical oxygen reduction reaction (ORR) on catalyst materials are crucial to improving the performance of different electrochemical energy conversion and storage systems (e.g., fuel cells and batteries), as well as numerous chemical synthesis processes. In the effort to reduce the loading of expensive platinum group metal (PGM)-based catalysts for ORR in the electrochemical systems, many carbon-based catalysts have already shown promising results and numerous investigations on those catalysts are in progress. Most of these studies show the catalyst materials’ ORR performance as current density data obtained through the rotating disk electrode (RDE), rotating ring-disk electrode (RRDE) experiments taking cyclic voltammograms (CV) or linear sweep voltammograms (LSV) approaches. However, the provided descriptions or interpretations of those data curves are often ambiguous and recondite which can lead to an erroneous understanding of the ORR phenomenon in...
We present up-to-date benchmarking methods for testing electrocatalysts for polymer exchange membrane fuel cells (PEMFC), using the rotating disk electrode (RDE) method. We focus on the oxygen reduction reaction (ORR) and the hydrogen oxidation reaction (HOR) in the presence of CO. We have chosen our experimental methods to provide the most optimal compromise between the ease of carrying out the measurements and for ensuring comparability with PEMFC conditions. For the ORR, the effect of temperature, scan rate, Ohmic drop correction and background subtraction on the catalyst activity is investigated, both on a polycrystalline Pt disk and two different commercial Pt/C catalysts. To benchmark the CO tolerance of HOR catalysts, cyclic voltammetry and chronoamperometry are used, on polycrystalline Pt and commercial catalysts consisting of Pt/C and PtRu/C. We recommend the optimal conditions for obtaining a benchmark of ORR activity and CO tolerance of HOR catalysts.
Journal of Applied Electrochemistry - J APPL ELECTROCHEM, 1998
A new method for electrochemical characterization of composite electrode materials is reported. A paste of the catalytic material in Nafion® is coated on a rotating ring disc electrode (RRDE) to partially simulate the working environment of a proton exchange membrane (PEM)/electrode composite as used in, for example, water electrolysis or PEM fuel cell operation. This allows direct comparison of a wide range of candidate electrocatalysts in a reproducible manner. Problems specific to these volumic electrodes are accommodated satisfactorily by rational modification of the standard expressions used in RRDE analysis. The value of the method is illustrated in studies of various cobalt complexes which show promise in dioxygen reduction; namely, cobalt tetramethoxyphenylporphyrin (CoTMPP), cobalt phthalocyanine (CoPC), and cobalt cyclam (CoCy), supported on a range of particulate carbons BP2000, Printex XE 2 and Vulcan XC-72. Typical electrochemical parameters have been measured or estima...
Journal of the American Chemical Society, 2012
An in situ electrochemical X-ray absorption spectroscopy (XAS) cell has been fabricated that enables high oxygen flux to the working electrode by utilizing a thin poly(dimethylsiloxane) (PDMS) window. This cell design enables in situ XAS investigations of the oxygen reduction reaction (ORR) at high operating current densities greater than 1 mA in an oxygen-purged environment. When the cell was used to study the ORR for a Pt on carbon electrocatalyst, the data revealed a progressive evolution of the electronic structure of the metal clusters that is both potential-dependent and strongly current-dependent. The trends establish a direct correlation to d-state occupancies that directly tracks the character of the Pt−O bonding present.
Recent Advances in Electrocatalysts for Oxygen Reduction Reaction
Chemical reviews, 2016
The recent advances in electrocatalysis for oxygen reduction reaction (ORR) for proton exchange membrane fuel cells (PEMFCs) are thoroughly reviewed. This comprehensive Review focuses on the low- and non-platinum electrocatalysts including advanced platinum alloys, core-shell structures, palladium-based catalysts, metal oxides and chalcogenides, carbon-based non-noble metal catalysts, and metal-free catalysts. The recent development of ORR electrocatalysts with novel structures and compositions is highlighted. The understandings of the correlation between the activity and the shape, size, composition, and synthesis method are summarized. For the carbon-based materials, their performance and stability in fuel cells and comparisons with those of platinum are documented. The research directions as well as perspectives on the further development of more active and less expensive electrocatalysts are provided.