Nonprocessed Adipose Tissue Graft in the Treatment of Dehiscence Bone Defects in Rabbit Tibiae (original) (raw)

Application of Adipose-Derived Stem Cells in Treatment of Bone Tissue Defects

Clinical Implementation of Bone Regeneration and Maintenance [Working Title]

Despite excellent self-regeneration capacity of bone tissue, there are some large bone defects that cannot be healed spontaneously. Numerous literature data in the field of cell-based bone tissue engineering showed that adipose-derived stem cells (ADSCs) after isolation could be subsequently applied in a one-step approach for treatment of bone defect, without previous in vitro expansion and osteoinduction. However, standard approaches usually involve in vitro expansion and osteoinduction of ADSCs as an additional preparation step before its final application. Bioreactors are also used for the preparation of ADSC-based graft prior application. The commonly used approaches are reviewed, and their outcomes, advantages, disadvantages, as well as their potential for successful application in the treatment of bone defects are discussed. Difficulty in spontaneous healing of bone defects is very often due to poor vascularization. To overcome this problem, numerous methods in bone tissue engineering (BTE) were developed. We focused on freshly isolated stromal vascular fraction (SVF) cells and ADSCs in vitro induced into endothelial cells (ECs) as cells with vasculogenic capacity for the further application in bone defect treatment. We have reviewed orthotopic and ectopic models in BTE that include the application of SVFs or ADSCs in vitro induced into ECs, with special reference to co-cultivation.

Generation of Bone Tissue Using Adipose Tissue-derived Stem Cells

Bezmialem Science, 2021

Bone grafts and even bone substitutes do not meet all of the requirements of bony reconstructions. The aim of this study was to generate bone tissue from autologous adipose tissue-derived mesenchymal stem cells (ATDMSCs) and decellularised bone allografts. Methods: A 1.5 cm bone defect developed in the middle third of the rabbit's ulna. Reconstructions were carried out using miniplate and screws and interpositional autogenous bone grafts according to the designs of the groups: (1) No touch, (2) cryopreserved, (3) decellularised and (4) ATDMSCs-implanted decellularised bones. Before implantation, ATDMSCs in the last group were labelled with Q-dot and identified microscopically.

Role of autologous rabbit adipose-derived stem cells in the early phases of the repairing process of critical bone defects

Journal of Orthopaedic Research, 2011

Adipose-derived stem cells (ASCs) may represent a novel and efficient tool to promote bone regeneration. In this study, rabbit ASCs were expanded in culture and used for the regeneration of full-thickness bone defects in the proximal epiphysis of tibia of 12 New Zealand rabbits. Defects were implanted with graft material as follows: untreated (control), empty hydroxyapatite (HA) disk, ASCs alone, and HA disk seeded with ASCs. Each isolated ASCs population was tested in vitro: they all showed a high proliferation rate, a marked clonogenic ability, and osteogenic differentiation potential. Eight weeks after implantation, macroscopic analyses of all the samples showed satisfactory filling of the lesions without any significant differences in term of stiffness between groups treated with or without cells (p > 0.05). In both the scaffold-treated groups, a good osteointegration was radiographically observed. Even if HA was not completely reabsorbed, ASCs-loaded HA displayed a higher scaffold resorption than the unloaded ones. Histological analyses showed that the osteogenic abilities of the scaffold-treated defects was greater than those of scaffold-free samples, and in particular new formed bone was more mature and more similar to native bone in presence of ASCs. These results demonstrated that autologous ASCs-HA constructs is a potential treatment for the regeneration of bone defects.

Tissue engineering of bone: Clinical observations with adipose-derived stem cells, resorbable scaffolds, and growth factors

Annals of maxillofacial surgery, 2012

Tissue engineering offers a simple, nonallergenic, and viable solution for the reconstruction of human tissues such as bone. With deeper understanding of the stem cell's pathobiology, the unique properties of these tissues can be effectively harnessed for the benefit of the patients. A primary source of mesenchymal stem cells (MSCs) for bone regeneration is from adipose tissue to provide adipose-derived stem cells (ASCs). The interdependency between adipogenesis and osteogenesis has been well established. The objective of this article is to present the preliminary clinical observation with reconstruction of craniofacial osseous defects larger than critical size with ASC. Patients with large craniofacial osseous defects only were included in this study. Autogenous fat from the anterior abdominal wall of the patients was harvested from 23 patients, taken to a central tissue banking laboratory and prepared. All patients were reconstructed with ASCs, resorbable scaffolds, and growth...

Bone Regeneration Using Adipose-Derived Stem Cells with Fibronectin in Dehiscence-Type Defects Associated with Dental Implants: An Experimental Study in a Dog Model

The International journal of oral & maxillofacial implants

To determine the bone regeneration potential of a ceramic biomaterial coated with fibronectin and adipose-derived stem cells covered in three-wall critical-size defects associated with dental implants. In a total of 18 dogs, four dehiscence-type and critical-size defects were created surgically in the edentulous alveolar ridge with the simultaneous placement of dental implants. Defects were randomly regenerated using biomaterials coated with particulate ß-tricalcium phosphate (β-TCP), β-TCP with fibronectin (Fn) (β-TCP-Fn), and β-TCP with a combination of Fn and autologous adipose-derived stem cells (ADSCs) (β-TCP-Fn-ADSCs), leaving one defect as the control. The animals were divided into three groups according to the time of euthanasia (1, 2, or 3 months). Statistically significant differences between the three study groups (β-TCP, β-TCP-Fn, β-TCP-Fn-ADSCs) and the control group in the total area of bone regeneration and mineralized and nonmineralized tissue at 1, 2, and 3 months o...

Isolation, characterization and osteogenic differentiation of adipose-derived stem cells: from small to large animal models

Cell and Tissue Research, 2009

One of the most important issues in orthopaedic surgery is the loss of bone resulting from trauma, infections, tumours or congenital deficiency. In view of the hypothetical future application of mesenchymal stem cells isolated from human adipose tissue in regenerative medicine, we have analysed and characterized adiposederived stem cells (ASCs) isolated from adipose tissue of rat, rabbit and pig. We have compared their in vitro osteogenic differentiation abilities for exploitation in the repair of critical osteochondral defects in autologous preclinical models. The number of pluripotent cells per millilitre of adipose tissue is variable and the yield of rabbit ASCs is lower than that in rat and pig. However, all ASCs populations show both a stable doubling time during culture and a marked clonogenic ability. After exposure to osteogenic stimuli, ASCs from rat, rabbit and pig exhibit a significant increase in the expression of osteogenic markers such as alkaline phosphatase, extracellular calcium deposition, osteocalcin and osteonectin. However, differences have been observed depending on the animal species and/ or differentiation period. Rabbit and porcine ASCs have been differentiated on granules of clinical grade hydroxyapatite (HA) towards osteoblast-like cells. These cells grow and adhere to the scaffold, with no inhibitory effect of HA during osteo-differentiation. Such in vitro studies are necessary in order to select suitable pre-clinical models to validate the use of autologous ASCs, alone or in association with proper biomaterials, for the repair of critical bone defects.

Tissue Constructs with Human Adipose-Derived Mesenchymal Stem Cells to Treat Bone Defects in Rats

Materials

The use of porous scaffolds created by additive manufacturing is considered a viable approach for the regeneration of critical-size bone defects. This paper investigates the xenotransplantation of polycaprolactone (PCL) tissue constructs seeded with differentiated and undifferentiated human adipose-derived mesenchymal stem cells (hADSCs) to treat calvarial critical-sized defect in Wistar rats. PCL scaffolds without cells were also considered. In vitro and in vivo biological evaluations were performed to assess the feasibility of these different approaches. In the case of cell seeded scaffolds, it was possible to observe the presence of hADSCs in the rat tissue contributing directly (osteoblasts) and indirectly (stimulation by paracrine factors) to tissue formation, organization and mineralization. The presence of bone morphogenetic protein-2 (BMP-2) in the rat tissue treated with cell-seeded PCL scaffolds suggests that the paracrine factors of undifferentiated hADSC cells could stim...

Combined Bone Allograft and Adipose-Derived Stem Cell Autograft in a Rabbit Model

Annals of Plastic Surgery, 2007

Currently available options for the repair of bony defects have substantial limitations. Much work has looked to the possibility of engineering bone using stem cells. These tissue-engineering efforts have focused on calvarial defect models, which have the advantages of minimal load-bearing and a large surface area. This study aims to solve the somewhat more challenging problem of repairing segmental bony defects such as those of the mandible and long bones. Four groups of decellularized bone tubes with cortical perforations were implanted subcutaneously in a rabbit model: empty bone tubes, bone tubes containing fibrin glue alone, bone tubes containing fibrin glue and freshly isolated autologous adiposederived stem cells (ASCs), and bone tubes containing fibrin glue and predifferentiated autologous ASCs. Results showed a foreign body response characterized by fibrous capsule formation with minimal angiogenesis and no evidence of osteoblastic activity. Substantial changes are needed if this model is to become viable.

Adipose Mesenchymal Stem Cells Associated with Xenograft in a Guided Bone Regeneration Model: A Histomorphometric Study in Rabbit Calvaria

The International journal of oral & maxillofacial implants

In spite of their osteoconductive potential, the biomaterials used as substitutes for an autologous graft do not show osteoinductive or osteogenic potential. This study evaluated the association of adult mesenchymal stem cells derived from adipose tissue with xenogenic bone graft in bone regeneration in rabbit calvaria. Mesenchymal stem cells were harvested from adipose tissue from 12 animals. These cells, combined with hydroxyapatite, were implanted in 12-mm bilateral bone defects created in the calvaria of six rabbits (test group [TG]), whereas only hydroxyapatite was implanted in the defects created in another group of six animals (control group [CG]). One grafted side of each animal was covered by a collagen membrane. After 8 weeks, the animals were sacrificed, and the region of the bone defects was removed and evaluated using histomorphometry and immunohistochemistry. The TG showed higher amounts (P < .05) of vital mineralized tissue and nonvital mineralized tissue, 28.24% ±...