Teaching the Art of Fault Diagnosis in Electronics by a Virtual Learning Environment (original) (raw)
Related papers
Design of trainer kit as a fault-finding based on electricity and electronics learning media
Jurnal Pendidikan Vokasi, 2021
According to the field of expertise, efforts to strengthen the competence of graduates continue to be pursued, especially through optimizing the learning process. Among these efforts is to use learning media that strengthen the competence of the field of study and about thinking skills. This study aims to produce a trainer kit as a medium for learning basic electricity and electronics based on fault-finding in Basic Electrical and Electronics subjects. The method used is the Richey and Klein Design and Development (DD) method which consists of three stages, including planning (design), production, and evaluation. Experts carried out the assessment of the feasibility of the trainer kit with an instrument in the form of a questionnaire. The results of this study indicate that the trainer kit has a good performance.According to the field of expertise, efforts to strengthen the competence of graduates continue to be pursued, especially through optimizing the learning process. Among thes...
A knowledge based tutoring system for teaching fault analysis
1998
A knowledge based tutoring system is used to support the education of power engineering students. The aim of this project is to make teaching and learning more productive and ef€icient by employing modern technologies. It seeks to find new methods to teach large numbers of students with no The knowledge based tutoring system whose development is reported here operates in an active dialogue mode with the student, using examples, and providing immediate explanations and feedback to students. It also allows the students to access to the learning facility at any time that is convenient for them. 2. COMPUTERAIDEDEDUCATION increase in staff. The tutoring system is based on an expert system shell. It provides a functionally interacting set of theory and problems, and supports student progress through monitoring and assessment. This paper describes the development of the tutoring system for teaching electrical engineering subjects, and in particular, fault analysis in power systems. The expert system based software has been successfully used by power engineering students. They found this software easy to use and understand, and it has become an extra teaching tool.
Troubleshooting-Based Learning with Interactive Approach for Polytechnics Students
2012
Basic electronics experiments are essential in providing fundamental foundation in electronics. Hence, this work proposes an interactive data logger specifically for basic electronics experiments in polytechnics. Development process including hardware and software will be discussed in details. Developed gadget utilizes the microcontroller for voltage measurement and serial communication with computer, Computer software has been designed to represent the data interactively on the computer screen. Furthermore, voltage and current measurement were successfully merged with on-board electronics components for simplified experimental setup. This gadget was designed to be compatible with two types of sensors. It provides two input channel and also can be utilized as an oscilloscope on the computer screen. At low development cost, this sleek and compact gadget is expected to enhance student's performances and attitudes towards the laboratory work in basic electronics. This claim will be validated later and it will be included as a future work.
Reactive learning environment for computer assisted electronics instruction
PsycEXTRA Dataset
This report describes the development of several new computer based strategies for teaching troubleshooting principles to electronics technicians. The computer programs to implement these strategies were developed in part from software produced in previous contracts. The report documents an experiment in which those materials were presented to student technicians to determine their attitudes toward the techniques, and to determine whether the training resulted in improvement of their technical skills. Results in both cases were positive with students responding very favorably to the materials and with their performance improving quantitatively and qualitatively after the instruction. The computer based techniques used are explained and examples of student interaction with the materials are included in' the report. Copies of the tutorial materials used in conjunction with the on-line computer presentations are presented in an appendix. (Author) * *
Development of Computer-Based Training to Supplement Lessons in Fundamentals of Electronics
Asia Pacific Journal of Multidisciplinary Research, 2016
Teaching Fundamentals of Electronics allow students to familiarize with basic electronics concepts, acquire skills in the use of multi-meter test instrument, and develop mastery in testing basic electronic components. Actual teaching and doing observations during practical activities on components pin identification and testing showed that the lack of skills of new students in testing components can lead to incorrect fault diagnosis and wrong pin connection during in-circuit replacement of the defective parts. With the aim of reinforcing students with concrete understanding of the concepts of components applied in the actual test and measurement, a Computer-Based Training was developed. The proponent developed the learning modules (courseware) utilizing concept mapping and storyboarding instructional design. Developing a courseware as simulated, activity-based and interactive as possible was the primary goal to resemble the real-world process. A Local area network (LAN)-based learning management system was also developed to use in administering the learning modules. The Paired Sample T-Test based on the pre-test and post-test result was used to determine whether the students achieved learning after taking the courseware. The result revealed that there is a significant achievement of the students after studying the learning module. The E-learning content was validated by the instructors in terms of contents, activities, assessment and format with a grand weighted mean of 4.35 interpreted as Sufficient. Based from the evaluation result, supplementing with the proposed computer-based training can enhance the teaching-learning process in electronic fundamentals.
Information Presentation and Troubleshooting in Electrical Circuits. Research Report
International Journal of Science Education, 2004
Information presentation and troubleshooting in electrical circuits While learning a complex skill in science using a computer-based simulation, optimal timing of information presentation facilitates learning and enhances test performance. An optimal information presentation format is proposed: supportive information is presented before practicing a skill and procedural information is presented during practice. Four information presentation formats were compared in a factorial design with the factors timing of supportive information (before or during task practice) and timing of procedural information (before or during task practice). Eighty-eight third year high school students (37 male, 51 female; mean age = 14 years, SD = 0.52) participated in the experiment. Information searching behaviour and transfer test performance were studied. The information searching behaviour confirms the hypothesis. Findings on the transfer test are less clear due to a bottom effect.
Frontiers in Education Conference, 2005
This paper presents an intelligent circuit analysis module that is capable of analyzing electrical circuits and determining equivalence. We discuss the module in context of a National Science Foundation funded project-Universal Virtual laboratory (UVL). UVL is a virtual electrical engineering laboratory for able and disabled individuals to construct, simulate and understand the characteristics of basic electrical circuits. This paper discusses the development of an intelligent circuit analysis module called the Circuit Recognizer (CR). The CR is a program that has knowledge of circuit theory concepts, and is capable of using this knowledge to provide assistance to a student while he/she is performing the experiments in UVL. While verifying circuit configuration it identifies errors and provides explanations that guide the student to a better understanding of the experiment. The ultimate objective of the CR is to evaluate the effectiveness of the teaching strategies employed within the UVL as well as to enhance the learning abilities of students.
An Intelligent System-based Teaching Tool for Electrical Engineering Subjects
Computer-based intelligent tutorials are dedicated to support the education of power and electrical engineering students. The aim of this project is to make teaching and learning more productive and efficient by employing modern technologies. It seeks to find new methods to teach large number of students with no increase in staff. Intelligent tutorials are developed based on an expert system shell. They provide the functionally interacted set of theory and problems, and support the student progress monitoring and assessment. This paper describes the development of tutoring software for teaching electrical engineering subjects, and in particular, faults analysis in power systems. The expert system based software has been developed and successfully used by power systems students. They found this software easy to use and understand, and it will become an extra teaching tool.
Transient response is considered to be one of the more difficult parts of learning electric circuit theory, because the mathematics is advanced and the Laplace transform is used to solve differential equations. Usually, the mathematics is taught in math courses and in problem solving sessions, the graphs in lab courses and the conceptual understanding of the transients in lectures, and students are expected to link these components themselves. The idea of conceptual labs has been developed previously for physics courses. In this kind of labs as well physical phenomena as their mathematical and graphical representations are elaborated. In this paper we describe an innovative course in electric circuit theory and how, by introducing systematic changes in lab instruction, it is possible to make students understand the relationship between theory and real circuits.