Chemical and thermal treatment of PEDOT:PSS thin films for use in organic light emitting diodes (original) (raw)
Ultra-smooth poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) films for flexible indium tin oxide-free organic light-emitting diodes
Ali Fallahzadeh
Journal of Luminescence, 2016
View PDFchevron_right
Indium–tin oxide treatments for single- and double-layer polymeric light-emitting diodes: The relation between the anode physical, chemical, and morphological properties and the device performance
R. Daik
Journal of Applied Physics, 1998
View PDFchevron_right
Fabrication of Highly Conductive Poly(3,4-ethylenedioxythiophene) Films by Vapor Phase Polymerization and Their Application in Efficient Organic Light-Emitting Diodes
Lichun Chen
Advanced Materials, 2007
View PDFchevron_right
Correlation between the Indium Tin Oxide morphology and the performances of polymer light-emitting diodes
Laurence Vignau
Thin Solid Films, 2005
View PDFchevron_right
Post-fabrication electric field and thermal treatment of polymer light emitting diodes and their photovoltaic properties
Ali Osman
Organic Electronics, 2009
View PDFchevron_right
The performance of OLEDs based on sorbitol doped PEDOT:PSS
Mustafa Can
Lancet
View PDFchevron_right
High performance organic polymer light-emitting heterostructure devices
Jerzy Kanicki
Applied Physics Letters, 1999
View PDFchevron_right
The influence of a PEDOT:PSS layer on the efficiency of a polymer light-emitting diode
Adeline Perro
Organic Electronics, 2003
View PDFchevron_right
Analysis of the current-voltage characteristics of polymer-based organic light-emitting diodes (OLEDs) deposited by spin coating
JOURNAL UNIVERSITAS SCIENTIARUM
View PDFchevron_right
Thermal and chemical treatment of ITO substrates for improvement of OLED performance
Nguyen N Dinh
Synthetic Metals, 2003
View PDFchevron_right
Poly(3,4-ethylenedioxythiophene) Derived from Poly(ionic liquid) for the Use as Hole-Injecting Material in Organic Light-Emitting Diodes
Kwang Suh
Macromolecular Rapid Communications, 2009
View PDFchevron_right
Electrochemical deposition of poly[ethylene-dioxythiophene] (PEDOT) films on ITO electrodes for organic photovoltaic cells: control of morphology, thickness, and electronic properties
Melina Tapia
Journal of Solid State Electrochemistry, 2018
View PDFchevron_right
Effect of alcohol vapor treatment on electrical and optical properties of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) films for indium tin oxide-free organic light-emitting diodes
Ali Fallahzadeh
Applied Surface Science, 2014
View PDFchevron_right
Conducting Polymer-Based Emissive Layer on Efficiency of OLEDs
debashish nayak
2021
View PDFchevron_right
Performance improvement of polymer solar cells by using a solvent-treated poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) buffer layer
Yingping Zou
Applied Physics Letters, 2011
View PDFchevron_right
Transparent and Conductive Properties of Nanocomposite Thin Film of MWCNTs and PEDOT-PSS for Applications in OLED
khanh nguyen duy
Journal of Materials Science and Engineering A, 2015
View PDFchevron_right
Reduction of the light-onset voltage of light-emitting diodes based on a soluble poly(p-phenylene vinylene) by grafting polar molecules onto indium–tin oxide
ana charas
Applied Physics Letters, 2002
View PDFchevron_right
Enhancement of current-voltage characteristics of multilayer organic light emitting diodes by using nanostructured composite films
Nguyen Dinh
Journal of Applied Physics, 2009
View PDFchevron_right
Inspection of substrate-heated modified PEDOT:PSS morphology for all spray deposited organic photovoltaics
Shin-Won Kang
Solar Energy Materials and Solar Cells, 2010
View PDFchevron_right
The Effects of Solvent Treated PEDOT:PSS Layer to Enhance Polymer Solar Cells Efficiency
Burak Y . Kadem
View PDFchevron_right
Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells
Desalegn Alemu Mengistie
View PDFchevron_right
Effect of molecular weight of additives on the conductivity of PEDOT-PSS and efficiency for ITO-free organic solar cells
Desalegn Alemu Mengistie
View PDFchevron_right
Rising advancements in the application of PEDOT:PSS as a prosperous transparent and flexible electrode material for solution-processed organic electronics
Gunel Huseynova
Journal of Information Display
View PDFchevron_right
Degradation of PEDOT:PSS hole injection layers by electrons in organic light emitting devices
çetin canbaz
Organic Electronics, 2019
View PDFchevron_right
Influence of Electrical, Chemical and Morphological Properties of Inorganic/Organic Interface on Light Emitting Devices Performance
Rosa Chierchia
Macromolecular Symposia, 2007
View PDFchevron_right
Influence of a Water Rinse on the Structure and Properties of Poly(3,4-ethylene dioxythiophene):Poly(styrene sulfonate) Films
Curt Richter, Eric Lin, Jan Obrzut
Langmuir, 2005
View PDFchevron_right
Contribution of O2 plasma treatment and amine modified GOs on film properties of conductive PEDOT:PSS: Application in indium tin oxide free solution processed blue OLED
Fatih Yeşil
Current Applied Physics, 2019
View PDFchevron_right
Slot-Die Coating of Double Polymer Layers for the Fabrication of Organic Light Emitting Diodes
Jacek Ulanski
Micromachines
View PDFchevron_right
Solution processed polymer light emitting diode with vanadium-oxide doped PEDOT:PSS
Jin Young Jang
physica status solidi (a), 2014
View PDFchevron_right
Organic–inorganic heterojunction light emitting diodes based on poly(p-phenylene vinylene)/cadmium sulfide thin films
Mukesh Joshi, Indore
Applied Physics Letters, 1997
View PDFchevron_right
Spray coated europium doped PEDOT:PSS anode buffer layer for organic solar cell: The role of electric field during deposition
Sapna Mudgal
Organic Electronics, 2018
View PDFchevron_right