cmake-generator-expressions(7) — CMake 4.0.1 Documentation (original) (raw)

Contents

cmake-generator-expressions(7)

Introduction ¶

Generator expressions are evaluated during build system generation to produce information specific to each build configuration. They have the form$<...>. For example:

target_include_directories(tgt PRIVATE /opt/include/$)

This would expand to /opt/include/GNU, /opt/include/Clang, etc. depending on the C++ compiler used.

Generator expressions are allowed in the context of many target properties, such as LINK_LIBRARIES, INCLUDE_DIRECTORIES,COMPILE_DEFINITIONS and others. They may also be used when using commands to populate those properties, such as target_link_libraries(),target_include_directories(), target_compile_definitions()and others. They enable conditional linking, conditional definitions used when compiling, conditional include directories, and more. The conditions may be based on the build configuration, target properties, platform information, or any other queryable information.

Generator expressions can be nested:

target_compile_definitions(tgt PRIVATE <<<<VERSION_LESS:$,4.2.0>:OLD_COMPILER> )

The above would expand to OLD_COMPILER if theCMAKE_CXX_COMPILER_VERSION is less than 4.2.0.

Whitespace And Quoting ¶

Generator expressions are typically parsed after command arguments. If a generator expression contains spaces, new lines, semicolons or other characters that may be interpreted as command argument separators, the whole expression should be surrounded by quotes when passed to a command. Failure to do so may result in the expression being split and it may no longer be recognized as a generator expression.

When using add_custom_command() or add_custom_target(), use the VERBATIM and COMMAND_EXPAND_LISTS options to obtain robust argument splitting and quoting.

WRONG: Embedded space will be treated as an argument separator.

This ends up not being seen as a generator expression at all.

add_custom_target(run_some_tool COMMAND some_tool -I$<JOIN:$<TARGET_PROPERTY:tgt,INCLUDE_DIRECTORIES>, -I> VERBATIM )

Better, but still not robust. Quotes prevent the space from splitting the

expression. However, the tool will receive the expanded value as a single

argument.

add_custom_target(run_some_tool COMMAND some_tool "-I$<JOIN:$<TARGET_PROPERTY:tgt,INCLUDE_DIRECTORIES>, -I>" VERBATIM )

Nearly correct. Using a semicolon to separate arguments and adding the

COMMAND_EXPAND_LISTS option means that paths with spaces will be handled

correctly. Quoting the whole expression ensures it is seen as a generator

expression. But if the target property is empty, we will get a bare -I

with nothing after it.

add_custom_target(run_some_tool COMMAND some_tool "-I$<JOIN:$<TARGET_PROPERTY:tgt,INCLUDE_DIRECTORIES>,;-I>" COMMAND_EXPAND_LISTS VERBATIM )

Using variables to build up a more complex generator expression is also a good way to reduce errors and improve readability. The above example can be improved further like so:

The $BOOL:... check prevents adding anything if the property is empty,

assuming the property value cannot be one of CMake's false constants.

set(prop "$<TARGET_PROPERTY:tgt,INCLUDE_DIRECTORIES>") add_custom_target(run_some_tool COMMAND some_tool "$<$BOOL:${prop}:-I$JOIN:${prop},;-I>" COMMAND_EXPAND_LISTS VERBATIM )

Finally, the above example can be expressed in a more simple and robust way using an alternate generator expression:

add_custom_target(run_some_tool COMMAND some_tool "$<LIST:TRANSFORM,$<TARGET_PROPERTY:tgt,INCLUDE_DIRECTORIES>,PREPEND,-I>" COMMAND_EXPAND_LISTS VERBATIM )

A common mistake is to try to split a generator expression across multiple lines with indenting:

WRONG: New lines and spaces all treated as argument separators, so the

generator expression is split and not recognized correctly.

target_compile_definitions(tgt PRIVATE <<<<AND: $<CXX_COMPILER_ID:GNU>, <VERSIONGREATEREQUAL:<VERSION_GREATER_EQUAL:<VERSIONGREATEREQUAL:,5> >:HAVE_5_OR_LATER> )

Again, use helper variables with well-chosen names to build up a readable expression instead:

set(is_gnu "$<CXX_COMPILER_ID:GNU>") set(v5_or_later "$<VERSION_GREATER_EQUAL:$,5>") set(meet_requirements "$AND:${is_gnu},${v5_or_later}") target_compile_definitions(tgt PRIVATE "$<${meet_requirements}:HAVE_5_OR_LATER>" )

Debugging ¶

Since generator expressions are evaluated during generation of the buildsystem, and not during processing of CMakeLists.txt files, it is not possible to inspect their result with the message() command. One possible way to generate debug messages is to add a custom target:

add_custom_target(genexdebug COMMAND CMAKECOMMAND−Eecho"{CMAKE_COMMAND} -E echo "CMAKECOMMAND−Eecho"<...>")

After running cmake, you can then build the genexdebug target to print the result of the $<...> expression (i.e. run the commandcmake --build ... --target genexdebug).

Another way is to write debug messages to a file with file(GENERATE):

file(GENERATE OUTPUT filename CONTENT "$<...>")

Generator Expression Reference ¶

Note

This reference deviates from most of the CMake documentation in that it omits angular brackets <...> around placeholders like condition,string, target, etc. This is to prevent an opportunity for those placeholders to be misinterpreted as generator expressions.

Conditional Expressions ¶

A fundamental category of generator expressions relates to conditional logic. Two forms of conditional generator expressions are supported:

$condition:true\_string ¶

Evaluates to true_string if condition is 1, or an empty string if condition evaluates to 0. Any other value for conditionresults in an error.

$IF:condition,true\_string,false\_string ¶

Added in version 3.8.

Evaluates to true_string if condition is 1, or false_stringif condition is 0. Any other value for condition results in an error.

Added in version 3.28: This generator expression short-circuits such that generator expressions infalse_string will not evaluate when condition is 1, and generator expressions in true_string will not evaluate when condition is 0.

Typically, the condition is itself a generator expression. For instance, the following expression expands to DEBUG_MODE when the Debugconfiguration is used, and the empty string for all other configurations: <<<CONFIG:Debug:DEBUG_MODE>

Boolean-like condition values other than 1 or 0 can be handled by wrapping them with the $<BOOL:...> generator expression:

$BOOL:string ¶

Converts string to 0 or 1. Evaluates to 0 if any of the following is true:

string is empty,
string is a case-insensitive equal of0, FALSE, OFF, N, NO, IGNORE, or NOTFOUND, or
string ends in the suffix -NOTFOUND (case-sensitive).

Otherwise evaluates to 1.

The $<BOOL:...> generator expression is often used when a conditionis provided by a CMake variable: <<<BOOL:${HAVE_SOME_FEATURE}:-DENABLE_SOME_FEATURE>

Logical Operators ¶

The common boolean logic operators are supported:

$AND:conditions ¶

where conditions is a comma-separated list of boolean expressions, all of which must evaluate to either 1 or 0. The whole expression evaluates to 1 if all conditions are 1. If any condition is 0, the whole expression evaluates to 0.

$OR:conditions ¶

where conditions is a comma-separated list of boolean expressions. all of which must evaluate to either 1 or 0. The whole expression evaluates to 1 if at least one of the conditions is 1. If allconditions evaluate to 0, the whole expression evaluates to 0.

$NOT:condition ¶

condition must be 0 or 1. The result of the expression is0 if condition is 1, else 1.

Added in version 3.28: Logical operators short-circuit such that generator expressions in the arguments list will not be evaluated once a return value can be determined.

Primary Comparison Expressions ¶

CMake supports a variety of generator expressions that compare things. This section covers the primary and most widely used comparison types. Other more specific comparison types are documented in their own separate sections further below.

String Comparisons ¶

$STREQUAL:string1,string2 ¶

1 if string1 and string2 are equal, else 0. The comparison is case-sensitive. For a case-insensitive comparison, combine with a string transforming generator expression. For example, the following evaluates to 1 if ${foo} is any of BAR, Bar, bar, etc. <STREQUAL:<STREQUAL:<STREQUAL:<UPPER_CASE:${foo}>,BAR>

$EQUAL:value1,value2 ¶

1 if value1 and value2 are numerically equal, else 0.

Version Comparisons ¶

$<VERSION_LESS:v1,v2>¶

1 if v1 is a version less than v2, else 0.

$<VERSION_GREATER:v1,v2>¶

1 if v1 is a version greater than v2, else 0.

$<VERSION_EQUAL:v1,v2>¶

1 if v1 is the same version as v2, else 0.

$<VERSION_LESS_EQUAL:v1,v2>¶

Added in version 3.7.

1 if v1 is a version less than or equal to v2, else 0.

$<VERSION_GREATER_EQUAL:v1,v2>¶

Added in version 3.7.

1 if v1 is a version greater than or equal to v2, else 0.

String Transformations ¶

$<LOWER_CASE:string>¶

Content of string converted to lower case.

$<UPPER_CASE:string>¶

Content of string converted to upper case.

$<MAKE_C_IDENTIFIER:...>¶

Content of ... converted to a C identifier. The conversion follows the same behavior as string(MAKE_C_IDENTIFIER).

List Expressions ¶

Most of the expressions in this section are closely associated with thelist() command, providing the same capabilities, but in the form of a generator expression.

In each of the following list-related generator expressions, the listmust not contain any commas if that generator expression expects something to be provided after the list. For example, the expression$<LIST:FIND,list,value> requires a value after the list. Since a comma is used to separate the list and the value, the listcannot itself contain a comma. This restriction does not apply to thelist() command, it is specific to the list-handling generator expressions only.

List Comparisons ¶

$<IN_LIST:string,list>¶

Added in version 3.12.

1 if string is an item in the semicolon-separated list, else 0. It uses case-sensitive comparisons.

List Queries ¶

$LIST:LENGTH,list ¶

Added in version 3.27.

The number of items in the list.

$LIST:GET,list,index,...

Added in version 3.27.

Expands to the list of items specified by indices from the list.

$LIST:SUBLIST,list,begin,length

Added in version 3.27.

A sublist of the given list. If length is 0, an empty list will be returned. If length is -1 or the list is smaller thanbegin + length, the remaining items of the list starting atbegin will be returned.

$LIST:FIND,list,value

Added in version 3.27.

The index of the first item in list with the specified value, or -1 if value is not in the list.

List Transformations ¶

$LIST:JOIN,list,glue

Added in version 3.27.

Converts list to a single string with the content of the glue string inserted between each item. This is conceptually the same operation as$JOIN:list,glue, but the two have different behavior with regard to empty items. $<LIST:JOIN,list,glue> preserves all empty items, whereas $JOIN:list,glue drops all empty items from the list.

$LIST:APPEND,list,item,...

Added in version 3.27.

The list with each item appended. Multiple items should be separated by commas.

$LIST:PREPEND,list,item,...

Added in version 3.27.

The list with each item inserted at the beginning. If there are multiple items, they should be separated by commas, and the order of the prepended items will be preserved.

$LIST:INSERT,list,index,item,...

Added in version 3.27.

The list with the item (or multiple items) inserted at the specifiedindex. Multiple items should be separated by commas.

It is an error to specify an out-of-range index. Valid indexes are 0 to N, where N is the length of the list, inclusive. An empty list has length 0.

$LIST:POP\_BACK,list

Added in version 3.27.

The list with the last item removed.

$LIST:POP\_FRONT,list

Added in version 3.27.

The list with the first item removed.

$LIST:REMOVE\_ITEM,list,value,...

Added in version 3.27.

The list with all instances of the given value (or values) removed. If multiple values are given, they should be separated by commas.

$LIST:REMOVE\_AT,list,index,...

Added in version 3.27.

The list with the item at each given index removed.

$LIST:REMOVE\_DUPLICATES,list

Added in version 3.27.

The list with all duplicated items removed. The relative order of items is preserved, but if duplicates are encountered, only the first instance is preserved. The result is the same as$<REMOVE_DUPLICATES:list>.

$LIST:FILTER,list,INCLUDE|EXCLUDE,regex

Added in version 3.27.

A list of items from the list which match (INCLUDE) or do not match (EXCLUDE) the regular expression regex. The result is the same as$FILTER:list,INCLUDE|EXCLUDE,regex.

$LIST:TRANSFORM,list,ACTION\[,SELECTOR\]

Added in version 3.27.

The list transformed by applying an ACTION to all or, by specifying a SELECTOR, to the selected list items.

Note

The TRANSFORM sub-command does not change the number of items in the list. If a SELECTOR is specified, only some items will be changed, the other ones will remain the same as before the transformation.

ACTION specifies the action to apply to the items of the list. The actions have exactly the same semantics as for thelist(TRANSFORM) command. ACTION must be one of the following:

APPEND, PREPEND

Append, prepend specified value to each item of the list.

$LIST:TRANSFORM,list,(APPEND|PREPEND),value[,SELECTOR]

TOLOWER, TOUPPER

Convert each item of the list to lower, upper characters.

$LIST:TRANSFORM,list,(TOLOWER|TOUPPER)[,SELECTOR]

STRIP

Remove leading and trailing spaces from each item of the list.

$LIST:TRANSFORM,list,STRIP[,SELECTOR]

REPLACE:

Match the regular expression as many times as possible and substitute the replacement expression for the match for each item of the list.

$LIST:TRANSFORM,list,REPLACE,regular_expression,replace_expression[,SELECTOR]

SELECTOR determines which items of the list will be transformed. Only one type of selector can be specified at a time. When given,SELECTOR must be one of the following:

AT

Specify a list of indexes.

$LIST:TRANSFORM,list,ACTION,AT,index[,index...]

FOR

Specify a range with, optionally, an increment used to iterate over the range.

$LIST:TRANSFORM,list,ACTION,FOR,start,stop[,step]

REGEX

Specify a regular expression. Only items matching the regular expression will be transformed.

$LIST:TRANSFORM,list,ACTION,REGEX,regular_expression

$JOIN:list,glue ¶

Joins the list with the content of the glue string inserted between each item. This is conceptually the same operation as$LIST:JOIN,list,glue, but the two have different behavior with regard to empty items.$LIST:JOIN,list,glue preserves all empty items, whereas $<JOIN,list,glue> drops all empty items from the list.

$<REMOVE_DUPLICATES:list>¶

Added in version 3.15.

Removes duplicated items in the given list. The relative order of items is preserved, and if duplicates are encountered, only the first instance is retained. The result is the same as$LIST:REMOVE\_DUPLICATES,list.

$FILTER:list,INCLUDE|EXCLUDE,regex ¶

Added in version 3.15.

Includes or removes items from list that match the regular expressionregex. The result is the same as$LIST:FILTER,list,INCLUDE|EXCLUDE,regex.

List Ordering ¶

$LIST:REVERSE,list

Added in version 3.27.

The list with the items in reverse order.

$LIST:SORT,list\[,(COMPARE:option|CASE:option|ORDER:option)\]...

Added in version 3.27.

The list sorted according to the specified options.

Use one of the COMPARE options to select the comparison method for sorting:

STRING

Sorts a list of strings alphabetically. This is the default behavior if the COMPARE option is not given.

FILE_BASENAME

Sorts a list of file paths by their basenames.

NATURAL

Sorts a list of strings using natural order (see the man page forstrverscmp(3)), such that contiguous digits are compared as whole numbers. For example, the following list 10.0 1.1 2.1 8.0 2.0 3.1will be sorted as 1.1 2.0 2.1 3.1 8.0 10.0 if the NATURALcomparison is selected, whereas it will be sorted as1.1 10.0 2.0 2.1 3.1 8.0 with the STRING comparison.

Use one of the CASE options to select a case-sensitive or case-insensitive sort mode:

SENSITIVE

List items are sorted in a case-sensitive manner. This is the default behavior if the CASE option is not given.

INSENSITIVE

List items are sorted in a case-insensitive manner. The order of items which differ only by upper/lowercase is not specified.

To control the sort order, one of the ORDER options can be given:

ASCENDING

Sorts the list in ascending order. This is the default behavior when the ORDER option is not given.

DESCENDING

Sorts the list in descending order.

Options can be specified in any order, but it is an error to specify the same option multiple times.

$LIST:SORT,list,CASE:SENSITIVE,COMPARE:STRING,ORDER:DESCENDING

Path Expressions ¶

Most of the expressions in this section are closely associated with thecmake_path() command, providing the same capabilities, but in the form of a generator expression.

For all generator expressions in this section, paths are expected to be in cmake-style format. The $PATH:CMAKE\_PATHgenerator expression can be used to convert a native path to a cmake-style one.

Path Comparisons ¶

$<PATH_EQUAL:path1,path2>¶

Added in version 3.24.

Compares the lexical representations of two paths. No normalization is performed on either path. Returns 1 if the paths are equal, 0otherwise.

See cmake_path(COMPARE) for more details.

Path Queries ¶

These expressions provide the generation-time capabilities equivalent to theQuery options of the cmake_path() command. All paths are expected to be in cmake-style format.

$PATH:HAS\_\*,path ¶

Added in version 3.24.

The following operations return 1 if the particular path component is present, 0 otherwise. See Path Structure And Terminology for the meaning of each path component.

$PATH:HAS_ROOT_NAME,path $PATH:HAS_ROOT_DIRECTORY,path $PATH:HAS_ROOT_PATH,path $PATH:HAS_FILENAME,path $PATH:HAS_EXTENSION,path $PATH:HAS_STEM,path $PATH:HAS_RELATIVE_PART,path $PATH:HAS_PARENT_PATH,path

Note the following special cases:

For HAS_ROOT_PATH, a true result will only be returned if at least one of root-name or root-directory is non-empty.
For HAS_PARENT_PATH, the root directory is also considered to have a parent, which will be itself. The result is true except if the path consists of just a filename.

$PATH:IS\_ABSOLUTE,path

Added in version 3.24.

Returns 1 if the path is absolute, 0 otherwise.

$PATH:IS\_RELATIVE,path

Added in version 3.24.

This will return the opposite of IS_ABSOLUTE.

$PATH:IS\_PREFIX\[,NORMALIZE\],path,input

Added in version 3.24.

Returns 1 if path is the prefix of input, 0 otherwise.

When the NORMALIZE option is specified, path and input arenormalized before the check.

Path Decomposition ¶

These expressions provide the generation-time capabilities equivalent to theDecomposition options of the cmake_path()command. All paths are expected to be in cmake-style format.

$PATH:GET\_\*,...

Added in version 3.24.

The following operations retrieve a different component or group of components from a path. See Path Structure And Terminology for the meaning of each path component.

Changed in version 3.27: All operations now accept a list of paths as argument. When a list of paths is specified, the operation will be applied to each path.

$PATH:GET_ROOT_NAME,path... $PATH:GET_ROOT_DIRECTORY,path... $PATH:GET_ROOT_PATH,path... $PATH:GET_FILENAME,path... $PATH:GET_EXTENSION[,LAST_ONLY],path... $PATH:GET_STEM[,LAST_ONLY],path... $PATH:GET_RELATIVE_PART,path... $PATH:GET_PARENT_PATH,path...

If a requested component is not present in the path, an empty string is returned.

Path Transformations ¶

These expressions provide the generation-time capabilities equivalent to theModification and Generationoptions of the cmake_path() command. All paths are expected to be in cmake-style format.

Changed in version 3.27: All operations now accept a list of paths as argument. When a list of paths is specified, the operation will be applied to each path.

$PATH:CMAKE\_PATH\[,NORMALIZE\],path...

Added in version 3.24.

Returns path. If path is a native path, it is converted into a cmake-style path with forward-slashes (/). On Windows, the long filename marker is taken into account.

When the NORMALIZE option is specified, the path is normalized after the conversion.

$PATH:NATIVE\_PATH\[,NORMALIZE\],path...

Added in version 4.0.

Returns path converted into a native format with platform-specific slashes (\ on Windows hosts and / elsewhere).

When the NORMALIZE option is specified, the path is normalized before the conversion.

$PATH:APPEND,path...,input,...

Added in version 3.24.

Returns all the input arguments appended to path using / as thedirectory-separator. Depending on the input, the value of pathmay be discarded.

See cmake_path(APPEND) for more details.

$PATH:REMOVE\_FILENAME,path...

Added in version 3.24.

Returns path with filename component (as returned by$<PATH:GET_FILENAME>) removed. After removal, any trailingdirectory-separator is left alone, if present.

See cmake_path(REMOVE_FILENAME) for more details.

$PATH:REPLACE\_FILENAME,path...,input

Added in version 3.24.

Returns path with the filename component replaced by input. Ifpath has no filename component (i.e. $<PATH:HAS_FILENAME> returns0), path is unchanged.

See cmake_path(REPLACE_FILENAME) for more details.

$PATH:REMOVE\_EXTENSION\[,LAST\_ONLY\],path...

Added in version 3.24.

Returns path with the extension removed, if any.

See cmake_path(REMOVE_EXTENSION) for more details.

$PATH:REPLACE\_EXTENSION\[,LAST\_ONLY\],path...,input

Added in version 3.24.

Returns path with the extension replaced byinput, if any.

See cmake_path(REPLACE_EXTENSION) for more details.

$PATH:NORMAL\_PATH,path...

Added in version 3.24.

Returns path normalized according to the steps described inNormalization.

$PATH:RELATIVE\_PATH,path...,base\_directory

Added in version 3.24.

Returns path, modified to make it relative to the base_directoryargument.

See cmake_path(RELATIVE_PATH) for more details.

$PATH:ABSOLUTE\_PATH\[,NORMALIZE\],path...,base\_directory

Added in version 3.24.

Returns path as absolute. If path is a relative path ($<PATH:IS_RELATIVE> returns 1), it is evaluated relative to the given base directory specified by base_directory argument.

When the NORMALIZE option is specified, the path isnormalized after the path computation.

See cmake_path(ABSOLUTE_PATH) for more details.

Shell Paths ¶

$<SHELL_PATH:...>¶

Added in version 3.4.

Content of ... converted to shell path style. For example, slashes are converted to backslashes in Windows shells and drive letters are converted to posix paths in MSYS shells. The ... must be an absolute path.

Added in version 3.14: The ... may be a semicolon-separated listof paths, in which case each path is converted individually and a result list is generated using the shell path separator (: on POSIX and; on Windows). Be sure to enclose the argument containing this genex in double quotes in CMake source code so that ; does not split arguments.

Configuration Expressions ¶

$¶

Configuration name. Use this instead of the deprecated CONFIGURATIONgenerator expression.

$CONFIG:cfgs

1 if config is any one of the entries in comma-separated listcfgs, else 0. This is a case-insensitive comparison. The mapping inMAP_IMPORTED_CONFIG_ is also considered by this expression when it is evaluated on a property of an IMPORTEDtarget.

Changed in version 3.19: Multiple configurations can be specified for cfgs. CMake 3.18 and earlier only accepted a single configuration.

$<OUTPUT_CONFIG:...>¶

Added in version 3.20.

Only valid in add_custom_command() and add_custom_target()as the outer-most generator expression in an argument. With the [Ninja Multi-Config](../generator/Ninja%20Multi-Config.html#generator:Ninja Multi-Config "Ninja Multi-Config") generator, generator expressions in ... are evaluated using the custom command's "output config". With other generators, the content of ... is evaluated normally.

$<COMMAND_CONFIG:...>¶

Added in version 3.20.

Only valid in add_custom_command() and add_custom_target()as the outer-most generator expression in an argument. With the [Ninja Multi-Config](../generator/Ninja%20Multi-Config.html#generator:Ninja Multi-Config "Ninja Multi-Config") generator, generator expressions in ... are evaluated using the custom command's "command config". With other generators, the content of ... is evaluated normally.

Toolchain And Language Expressions ¶

Platform ¶

$<PLATFORM_ID>¶

The current system's CMake platform id. See also the CMAKE_SYSTEM_NAME variable.

$<PLATFORM_ID:platform_ids>

1 if CMake's platform id matches any one of the entries in comma-separated list platform_ids, otherwise 0. See also the CMAKE_SYSTEM_NAME variable.

Compiler Version ¶

See also the CMAKE__COMPILER_VERSION variable, which is closely related to the expressions in this sub-section.

$<C_COMPILER_VERSION>¶

The version of the C compiler used.

$<C_COMPILER_VERSION:version>

1 if the version of the C compiler matches version, otherwise 0.

$<CXX_COMPILER_VERSION>¶

The version of the CXX compiler used.

$<CXX_COMPILER_VERSION:version>

1 if the version of the C++ compiler matches version, otherwise 0.

$<CUDA_COMPILER_VERSION>¶

Added in version 3.15.

The version of the CUDA compiler used.

$<CUDA_COMPILER_VERSION:version>

Added in version 3.15.

1 if the version of the C++ compiler matches version, otherwise 0.

$<OBJC_COMPILER_VERSION>¶

Added in version 3.16.

The version of the Objective-C compiler used.

$<OBJC_COMPILER_VERSION:version>

Added in version 3.16.

1 if the version of the Objective-C compiler matches version, otherwise 0.

$<OBJCXX_COMPILER_VERSION>¶

Added in version 3.16.

The version of the Objective-C++ compiler used.

$<OBJCXX_COMPILER_VERSION:version>

Added in version 3.16.

1 if the version of the Objective-C++ compiler matches version, otherwise 0.

$<Fortran_COMPILER_VERSION>¶

The version of the Fortran compiler used.

$<Fortran_COMPILER_VERSION:version>

1 if the version of the Fortran compiler matches version, otherwise 0.

$<HIP_COMPILER_VERSION>¶

Added in version 3.21.

The version of the HIP compiler used.

$<HIP_COMPILER_VERSION:version>

Added in version 3.21.

1 if the version of the HIP compiler matches version, otherwise 0.

$<ISPC_COMPILER_VERSION>¶

Added in version 3.19.

The version of the ISPC compiler used.

$<ISPC_COMPILER_VERSION:version>

Added in version 3.19.

1 if the version of the ISPC compiler matches version, otherwise 0.

Compiler Language, ID, and Frontend-Variant ¶

See also the CMAKE__COMPILER_ID andCMAKE__COMPILER_FRONTEND_VARIANT variables, which are closely related to most of the expressions in this sub-section.

$<C_COMPILER_ID>¶

CMake's compiler id of the C compiler used.

$<C_COMPILER_ID:compiler_ids>

where compiler_ids is a comma-separated list.1 if CMake's compiler id of the C compiler matches any one of the entries in compiler_ids, otherwise 0.

Changed in version 3.15: Multiple compiler_ids can be specified. CMake 3.14 and earlier only accepted a single compiler ID.

$<CXX_COMPILER_ID>¶

CMake's compiler id of the C++ compiler used.

$<CXX_COMPILER_ID:compiler_ids>

where compiler_ids is a comma-separated list.1 if CMake's compiler id of the C++ compiler matches any one of the entries in compiler_ids, otherwise 0.

Changed in version 3.15: Multiple compiler_ids can be specified. CMake 3.14 and earlier only accepted a single compiler ID.

$<CUDA_COMPILER_ID>¶

Added in version 3.15.

CMake's compiler id of the CUDA compiler used.

$<CUDA_COMPILER_ID:compiler_ids>

Added in version 3.15.

where compiler_ids is a comma-separated list.1 if CMake's compiler id of the CUDA compiler matches any one of the entries in compiler_ids, otherwise 0.

$<OBJC_COMPILER_ID>¶

Added in version 3.16.

CMake's compiler id of the Objective-C compiler used.

$<OBJC_COMPILER_ID:compiler_ids>

Added in version 3.16.

where compiler_ids is a comma-separated list.1 if CMake's compiler id of the Objective-C compiler matches any one of the entries in compiler_ids, otherwise 0.

$<OBJCXX_COMPILER_ID>¶

Added in version 3.16.

CMake's compiler id of the Objective-C++ compiler used.

$<OBJCXX_COMPILER_ID:compiler_ids>

Added in version 3.16.

where compiler_ids is a comma-separated list.1 if CMake's compiler id of the Objective-C++ compiler matches any one of the entries in compiler_ids, otherwise 0.

$<Fortran_COMPILER_ID>¶

CMake's compiler id of the Fortran compiler used.

$<Fortran_COMPILER_ID:compiler_ids>

where compiler_ids is a comma-separated list.1 if CMake's compiler id of the Fortran compiler matches any one of the entries in compiler_ids, otherwise 0.

Changed in version 3.15: Multiple compiler_ids can be specified. CMake 3.14 and earlier only accepted a single compiler ID.

$<HIP_COMPILER_ID>¶

Added in version 3.21.

CMake's compiler id of the HIP compiler used.

$<HIP_COMPILER_ID:compiler_ids>

Added in version 3.21.

where compiler_ids is a comma-separated list.1 if CMake's compiler id of the HIP compiler matches any one of the entries in compiler_ids, otherwise 0.

$<ISPC_COMPILER_ID>¶

Added in version 3.19.

CMake's compiler id of the ISPC compiler used.

$<ISPC_COMPILER_ID:compiler_ids>

Added in version 3.19.

where compiler_ids is a comma-separated list.1 if CMake's compiler id of the ISPC compiler matches any one of the entries in compiler_ids, otherwise 0.

$<C_COMPILER_FRONTEND_VARIANT>¶

Added in version 3.30.

CMake's compiler frontend variant of the C compiler used.

$<C_COMPILER_FRONTEND_VARIANT:compiler_ids>

Added in version 3.30.

where compiler_ids is a comma-separated list.1 if CMake's compiler frontend variant of the C compiler matches any one of the entries in compiler_ids, otherwise 0.

$<CXX_COMPILER_FRONTEND_VARIANT>¶

Added in version 3.30.

CMake's compiler frontend variant of the C++ compiler used.

$<CXX_COMPILER_FRONTEND_VARIANT:compiler_ids>

Added in version 3.30.

where compiler_ids is a comma-separated list.1 if CMake's compiler frontend variant of the C++ compiler matches any one of the entries in compiler_ids, otherwise 0.

$<CUDA_COMPILER_FRONTEND_VARIANT>¶

Added in version 3.30.

CMake's compiler id of the CUDA compiler used.

$<CUDA_COMPILER_FRONTEND_VARIANT:compiler_ids>

Added in version 3.30.

where compiler_ids is a comma-separated list.1 if CMake's compiler frontend variant of the CUDA compiler matches any one of the entries in compiler_ids, otherwise 0.

$<OBJC_COMPILER_FRONTEND_VARIANT>¶

Added in version 3.30.

CMake's compiler frontend variant of the Objective-C compiler used.

$<OBJC_COMPILER_FRONTEND_VARIANT:compiler_ids>

Added in version 3.30.

where compiler_ids is a comma-separated list.1 if CMake's compiler frontend variant of the Objective-C compiler matches any one of the entries in compiler_ids, otherwise 0.

$<OBJCXX_COMPILER_FRONTEND_VARIANT>¶

Added in version 3.30.

CMake's compiler frontend variant of the Objective-C++ compiler used.

$<OBJCXX_COMPILER_FRONTEND_VARIANT:compiler_ids>

Added in version 3.30.

where compiler_ids is a comma-separated list.1 if CMake's compiler frontend variant of the Objective-C++ compiler matches any one of the entries in compiler_ids, otherwise 0.

$<Fortran_COMPILER_FRONTEND_VARIANT>¶

Added in version 3.30.

CMake's compiler id of the Fortran compiler used.

$<Fortran_COMPILER_FRONTEND_VARIANT:compiler_ids>

Added in version 3.30.

where compiler_ids is a comma-separated list.1 if CMake's compiler frontend variant of the Fortran compiler matches any one of the entries in compiler_ids, otherwise 0.

$<HIP_COMPILER_FRONTEND_VARIANT>¶

Added in version 3.30.

CMake's compiler id of the HIP compiler used.

$<HIP_COMPILER_FRONTEND_VARIANT:compiler_ids>

Added in version 3.30.

where compiler_ids is a comma-separated list.1 if CMake's compiler frontend variant of the HIP compiler matches any one of the entries in compiler_ids, otherwise 0.

$<ISPC_COMPILER_FRONTEND_VARIANT>¶

Added in version 3.30.

CMake's compiler id of the ISPC compiler used.

$<ISPC_COMPILER_FRONTEND_VARIANT:compiler_ids>

Added in version 3.30.

where compiler_ids is a comma-separated list.1 if CMake's compiler frontend variant of the ISPC compiler matches any one of the entries in compiler_ids, otherwise 0.

$<COMPILE_LANGUAGE>¶

Added in version 3.3.

The compile language of source files when evaluating compile options. See the related boolean expression $<COMPILE_LANGUAGE:language>for notes about the portability of this generator expression.

$<COMPILE_LANGUAGE:languages>

Added in version 3.3.

Changed in version 3.15: Multiple languages can be specified for languages. CMake 3.14 and earlier only accepted a single language.

1 when the language used for compilation unit matches any of the comma-separated entries in languages, otherwise 0. This expression may be used to specify compile options, compile definitions, and include directories for source files of a particular language in a target. For example:

add_executable(myapp main.cpp foo.c bar.cpp zot.cu) target_compile_options(myapp PRIVATE <<<<COMPILE_LANGUAGE:CXX>:-fno-exceptions> ) target_compile_definitions(myapp PRIVATE <<<<COMPILE_LANGUAGE:CXX>:COMPILING_CXX> <<<<COMPILE_LANGUAGE:CUDA>:COMPILING_CUDA> ) target_include_directories(myapp PRIVATE <<<<COMPILE_LANGUAGE:CXX,CUDA>:/opt/foo/headers> )

This specifies the use of the -fno-exceptions compile option,COMPILING_CXX compile definition, and cxx_headers include directory for C++ only (compiler id checks elided). It also specifies a COMPILING_CUDA compile definition for CUDA.

Note that with Visual Studio Generators and Xcode there is no way to represent target-wide compile definitions or include directories separately for C and CXX languages. Also, with Visual Studio Generators there is no way to represent target-wide flags separately for C and CXX languages. Under these generators, expressions for both C and C++ sources will be evaluated using CXX if there are any C++ sources and otherwise using C. A workaround is to create separate libraries for each source file language instead:

add_library(myapp_c foo.c) add_library(myapp_cxx bar.cpp) target_compile_options(myapp_cxx PUBLIC -fno-exceptions) add_executable(myapp main.cpp) target_link_libraries(myapp myapp_c myapp_cxx)

$<COMPILE_LANG_AND_ID:language,compiler_ids>¶

Added in version 3.15.

1 when the language used for compilation unit matches language and CMake's compiler id of the language compiler matches any one of the comma-separated entries in compiler_ids, otherwise 0. This expression is a short form for the combination of $<COMPILE_LANGUAGE:language> and$<LANG_COMPILER_ID:compiler_ids>. This expression may be used to specify compile options, compile definitions, and include directories for source files of a particular language and compiler combination in a target. For example:

add_executable(myapp main.cpp foo.c bar.cpp zot.cu) target_compile_definitions(myapp PRIVATE <<<<COMPILE_LANG_AND_ID:CXX,AppleClang,Clang>:COMPILING_CXX_WITH_CLANG> <<<<COMPILE_LANG_AND_ID:CXX,Intel>:COMPILING_CXX_WITH_INTEL> <<<<COMPILE_LANG_AND_ID:C,Clang>:COMPILING_C_WITH_CLANG> )

This specifies the use of different compile definitions based on both the compiler id and compilation language. This example will have aCOMPILING_CXX_WITH_CLANG compile definition when Clang is the CXX compiler, and COMPILING_CXX_WITH_INTEL when Intel is the CXX compiler. Likewise, when the C compiler is Clang, it will only see theCOMPILING_C_WITH_CLANG definition.

Without the COMPILE_LANG_AND_ID generator expression, the same logic would be expressed as:

target_compile_definitions(myapp PRIVATE <<<<AND:$<COMPILE_LANGUAGE:CXX>,$<CXX_COMPILER_ID:AppleClang,Clang>>:COMPILING_CXX_WITH_CLANG> <<<<AND:$<COMPILE_LANGUAGE:CXX>,$<CXX_COMPILER_ID:Intel>>:COMPILING_CXX_WITH_INTEL> <<<<AND:$<COMPILE_LANGUAGE:C>,$<C_COMPILER_ID:Clang>>:COMPILING_C_WITH_CLANG> )

Compile Features ¶

$<COMPILE_FEATURES:features>¶

Added in version 3.1.

where features is a comma-separated list. Evaluates to 1 if all of the features are available for the 'head' target, and 0 otherwise. If this expression is used while evaluating the link implementation of a target and if any dependency transitively increases the required C_STANDARD or CXX_STANDARDfor the 'head' target, an error is reported. See thecmake-compile-features(7) manual for information on compile features and a list of supported compilers.

Compile Context ¶

$<COMPILE_ONLY:...>¶

Added in version 3.27.

Content of ..., when collectingtransitive compile properties, otherwise it is the empty string. This is intended for use in anINTERFACE_LINK_LIBRARIES and LINK_LIBRARIES target properties, typically populated via the target_link_libraries() command. Provides compilation usage requirements without any linking requirements.

Use cases include header-only usage where all usages are known to not have linking requirements (e.g., all-inline or C++ template libraries).

Note that for proper evaluation of this expression requires policy CMP0099to be set to NEW.

Linker Language And ID ¶

$<LINK_LANGUAGE>¶

Added in version 3.18.

The link language of the target when evaluating link options. See the related boolean expression $<LINK_LANGUAGE:languages>for notes about the portability of this generator expression.

Note

This generator expression is not supported by the link libraries properties to avoid side-effects due to the double evaluation of these properties.

$<LINK_LANGUAGE:languages>

Added in version 3.18.

1 when the language used for link step matches any of the comma-separated entries in languages, otherwise 0. This expression may be used to specify link libraries, link options, link directories and link dependencies of a particular language in a target. For example:

add_library(api_C ...) add_library(api_CXX ...) add_library(api INTERFACE) target_link_options(api INTERFACE <<<<LINK_LANGUAGE:C>:-opt_c> <<<<LINK_LANGUAGE:CXX>:-opt_cxx>) target_link_libraries(api INTERFACE <<<<LINK_LANGUAGE:C>:api_C> <<<<LINK_LANGUAGE:CXX>:api_CXX>)

add_executable(myapp1 main.c) target_link_options(myapp1 PRIVATE api)

add_executable(myapp2 main.cpp) target_link_options(myapp2 PRIVATE api)

This specifies to use the api target for linking targets myapp1 andmyapp2. In practice, myapp1 will link with target api_C and option -opt_c because it will use C as link language. And myapp2will link with api_CXX and option -opt_cxx because CXX will be the link language.

Note

To determine the link language of a target, it is required to collect, transitively, all the targets which will be linked to it. So, for link libraries properties, a double evaluation will be done. During the first evaluation, $<LINK_LANGUAGE:..> expressions will always return 0. The link language computed after this first pass will be used to do the second pass. To avoid inconsistency, it is required that the second pass do not change the link language. Moreover, to avoid unexpected side-effects, it is required to specify complete entities as part of the$<LINK_LANGUAGE:..> expression. For example:

add_library(lib STATIC file.cxx) add_library(libother STATIC file.c)

bad usage

add_executable(myapp1 main.c) target_link_libraries(myapp1 PRIVATE lib$<$<LINK_LANGUAGE:C>:other>)

correct usage

add_executable(myapp2 main.c) target_link_libraries(myapp2 PRIVATE <<<<LINK_LANGUAGE:C>:libother>)

In this example, for myapp1, the first pass will, unexpectedly, determine that the link language is CXX because the evaluation of the generator expression will be an empty string so myapp1 will depends on target lib which is C++. On the contrary, for myapp2, the first evaluation will give C as link language, so the second pass will correctly add target libother as link dependency.

$<LINK_LANG_AND_ID:language,compiler_ids>¶

Added in version 3.18.

1 when the language used for link step matches language and the CMake's compiler id of the language linker matches any one of the comma-separated entries in compiler_ids, otherwise 0. This expression is a short form for the combination of $<LINK_LANGUAGE:language> and$<LANG_COMPILER_ID:compiler_ids>. This expression may be used to specify link libraries, link options, link directories and link dependencies of a particular language and linker combination in a target. For example:

add_library(libC_Clang ...) add_library(libCXX_Clang ...) add_library(libC_Intel ...) add_library(libCXX_Intel ...)

add_executable(myapp main.c) if (CXX_CONFIG) target_sources(myapp PRIVATE file.cxx) endif() target_link_libraries(myapp PRIVATE <<<<LINK_LANG_AND_ID:CXX,Clang,AppleClang>:libCXX_Clang> <<<<LINK_LANG_AND_ID:C,Clang,AppleClang>:libC_Clang> <<<<LINK_LANG_AND_ID:CXX,Intel>:libCXX_Intel> <<<<LINK_LANG_AND_ID:C,Intel>:libC_Intel>)

This specifies the use of different link libraries based on both the compiler id and link language. This example will have target libCXX_Clangas link dependency when Clang or AppleClang is the CXXlinker, and libCXX_Intel when Intel is the CXX linker. Likewise when the C linker is Clang or AppleClang, targetlibC_Clang will be added as link dependency and libC_Intel whenIntel is the C linker.

See the note related to $<LINK_LANGUAGE:language> for constraints about the usage of this generator expression.

Link Features ¶

$<LINK_LIBRARY:feature,library-list>¶

Added in version 3.24.

Specify a set of libraries to link to a target, along with a featurewhich provides details about how they should be linked. For example:

add_library(lib1 STATIC ...) add_library(lib2 ...) target_link_libraries(lib2 PRIVATE "$<LINK_LIBRARY:WHOLE_ARCHIVE,lib1>")

This specifies that lib2 should link to lib1 and use theWHOLE_ARCHIVE feature when doing so.

Feature names are case-sensitive and may only contain letters, numbers and underscores. Feature names defined in all uppercase are reserved for CMake's own built-in features. The pre-defined built-in library features are:

DEFAULT

This feature corresponds to standard linking, essentially equivalent to using no feature at all. It is typically only used with theLINK_LIBRARY_OVERRIDE andLINK_LIBRARY_OVERRIDE_ target properties.

WHOLE_ARCHIVE

Force inclusion of all members of a static library when linked as a dependency of consuming Executables, Shared Libraries, and Module Libraries. This feature is only supported for the following platforms, with limitations as noted:

Linux.
All BSD variants.
SunOS.
All Apple variants. The library must be specified as a CMake target name, a library file name (such as libfoo.a), or a library file path (such as/path/to/libfoo.a). Due to a limitation of the Apple linker, it cannot be specified as a plain library name like foo, where foois not a CMake target.
Windows. When using a MSVC or MSVC-like toolchain, the MSVC version must be greater than 1900.
Cygwin.
MSYS.

Note

Since Static Libraries are archives and not linked binaries, CMake records their link dependencies for transitive use when linking consuming binaries. Therefore WHOLE_ARCHIVE does not cause a static library's objects to be included in other static libraries. Use Object Libraries for that.

FRAMEWORK

This option tells the linker to search for the specified framework using the -framework linker option. It can only be used on Apple platforms, and only with a linker that understands the option used (i.e. the linker provided with Xcode, or one compatible with it).

The framework can be specified as a CMake framework target, a bare framework name, or a file path. If a target is given, that target must have theFRAMEWORK target property set to true. For a file path, if it contains a directory part, that directory will be added as a framework search path.

add_library(lib SHARED ...) target_link_libraries(lib PRIVATE "$<LINK_LIBRARY:FRAMEWORK,/path/to/my_framework>")

The constructed linker command line will contain:

-F/path/to -framework my_framework

File paths must conform to one of the following patterns (* is a wildcard, and optional parts are shown as [...]):

[/path/to/]FwName[.framework]
[/path/to/]FwName.framework/FwName[suffix]
[/path/to/]FwName.framework/Versions/*/FwName[suffix]

Note that CMake recognizes and automatically handles framework targets, even without using the $<LINK_LIBRARY:FRAMEWORK,...> expression. The generator expression can still be used with a CMake target if the project wants to be explicit about it, but it is not required to do so. The linker command line may have some differences between using the generator expression or not, but the final result should be the same. On the other hand, if a file path is given, CMake will recognize some paths automatically, but not all cases. The project may want to use$<LINK_LIBRARY:FRAMEWORK,...> for file paths so that the expected behavior is clear.

Added in version 3.25: The FRAMEWORK_MULTI_CONFIG_POSTFIX_ target property as well as the suffix of the framework library name are now supported by the FRAMEWORK features.

NEEDED_FRAMEWORK

This is similar to the FRAMEWORK feature, except it forces the linker to link with the framework even if no symbols are used from it. It uses the -needed_framework option and has the same linker constraints asFRAMEWORK.

REEXPORT_FRAMEWORK

This is similar to the FRAMEWORK feature, except it tells the linker that the framework should be available to clients linking to the library being created. It uses the -reexport_framework option and has the same linker constraints as FRAMEWORK.

WEAK_FRAMEWORK

This is similar to the FRAMEWORK feature, except it forces the linker to mark the framework and all references to it as weak imports. It uses the -weak_framework option and has the same linker constraints asFRAMEWORK.

NEEDED_LIBRARY

This is similar to the NEEDED_FRAMEWORK feature, except it is for use with non-framework targets or libraries (Apple platforms only). It uses the -needed_library or -needed-l option as appropriate, and has the same linker constraints as NEEDED_FRAMEWORK.

REEXPORT_LIBRARY

This is similar to the REEXPORT_FRAMEWORK feature, except it is for use with non-framework targets or libraries (Apple platforms only). It uses the -reexport_library or -reexport-l option as appropriate, and has the same linker constraints as REEXPORT_FRAMEWORK.

WEAK_LIBRARY

This is similar to the WEAK_FRAMEWORK feature, except it is for use with non-framework targets or libraries (Apple platforms only). It uses the -weak_library or -weak-l option as appropriate, and has the same linker constraints as WEAK_FRAMEWORK.

Built-in and custom library features are defined in terms of the following variables:

The value used for each of these variables is the value as set at the end of the directory scope in which the target was created. The usage is as follows:

If the language-specificCMAKE__LINK_LIBRARY_USING__SUPPORTED variable is true, the feature must be defined by the correspondingCMAKE__LINK_LIBRARY_USING_ variable.
If no language-specific feature is supported, then theCMAKE_LINK_LIBRARY_USING__SUPPORTED variable must be true and the feature must be defined by the correspondingCMAKE_LINK_LIBRARY_USING_ variable.

The following limitations should be noted:

The library-list can specify CMake targets or libraries. Any CMake target of type OBJECTor INTERFACE will ignore the feature aspect of the expression and instead be linked in the standard way.
The $<LINK_LIBRARY:...> generator expression can only be used to specify link libraries. In practice, this means it can appear in theLINK_LIBRARIES, INTERFACE_LINK_LIBRARIES, andINTERFACE_LINK_LIBRARIES_DIRECT target properties, and be specified in target_link_libraries() and link_libraries()commands.
If a $<LINK_LIBRARY:...> generator expression appears in theINTERFACE_LINK_LIBRARIES property of a target, it will be included in the imported target generated by a install(EXPORT)command. It is the responsibility of the environment consuming this import to define the link feature used by this expression.
Each target or library involved in the link step must have at most only one kind of library feature. The absence of a feature is also incompatible with all other features. For example:
add_library(lib1 ...)
add_library(lib2 ...)
add_library(lib3 ...)

lib1 will be associated with feature1

target_link_libraries(lib2 PUBLIC "$<LINK_LIBRARY:feature1,lib1>")

lib1 is being linked with no feature here. This conflicts with the

use of feature1 in the line above and would result in an error.

target_link_libraries(lib3 PRIVATE lib1 lib2)
Where it isn't possible to use the same feature throughout a build for a given target or library, the LINK_LIBRARY_OVERRIDE andLINK_LIBRARY_OVERRIDE_ target properties can be used to resolve such incompatibilities.

The $<LINK_LIBRARY:...> generator expression does not guarantee that the list of specified targets and libraries will be kept grouped together. To manage constructs like --start-group and --end-group, as supported by the GNU ld linker, use the LINK_GROUPgenerator expression instead.

$<LINK_GROUP:feature,library-list>¶

Added in version 3.24.

Specify a group of libraries to link to a target, along with a featurewhich defines how that group should be linked. For example:

add_library(lib1 STATIC ...) add_library(lib2 ...) target_link_libraries(lib2 PRIVATE "$<LINK_GROUP:RESCAN,lib1,external>")

This specifies that lib2 should link to lib1 and external, and that both of those two libraries should be included on the linker command line according to the definition of the RESCAN feature.

RESCAN

Some linkers are single-pass only. For such linkers, circular references between libraries typically result in unresolved symbols. This feature instructs the linker to search the specified static libraries repeatedly until no new undefined references are created.

Normally, a static library is searched only once in the order that it is specified on the command line. If a symbol in that library is needed to resolve an undefined symbol referred to by an object in a library that appears later on the command line, the linker would not be able to resolve that reference. By grouping the static libraries with the RESCANfeature, they will all be searched repeatedly until all possible references are resolved. This will use linker options like --start-group and--end-group, or on SunOS, -z rescan-start and -z rescan-end.

Using this feature has a significant performance cost. It is best to use it only when there are unavoidable circular references between two or more static libraries.

This feature is available when using toolchains that target Linux, BSD, and SunOS. It can also be used when targeting Windows platforms if the GNU toolchain is used.

Built-in and custom group features are defined in terms of the following variables:

The value used for each of these variables is the value as set at the end of the directory scope in which the target was created. The usage is as follows:

If the language-specificCMAKE__LINK_GROUP_USING__SUPPORTED variable is true, the feature must be defined by the correspondingCMAKE__LINK_GROUP_USING_ variable.
If no language-specific feature is supported, then theCMAKE_LINK_GROUP_USING__SUPPORTED variable must be true and the feature must be defined by the correspondingCMAKE_LINK_GROUP_USING_ variable.

The LINK_GROUP generator expression is compatible with theLINK_LIBRARY generator expression. The libraries involved in a group can be specified using the LINK_LIBRARY generator expression.

Each target or external library involved in the link step is allowed to be part of multiple groups, but only if all the groups involved specify the same feature. Such groups will not be merged on the linker command line, the individual groups will still be preserved. Mixing different group features for the same target or library is forbidden.

add_library(lib1 ...) add_library(lib2 ...) add_library(lib3 ...) add_library(lib4 ...) add_library(lib5 ...)

target_link_libraries(lib3 PUBLIC "$<LINK_GROUP:feature1,lib1,lib2>") target_link_libraries(lib4 PRIVATE "$<LINK_GROUP:feature1,lib1,lib3>")

lib4 will be linked with the groups {lib1,lib2} and {lib1,lib3}.

Both groups specify the same feature, so this is fine.

target_link_libraries(lib5 PRIVATE "$<LINK_GROUP:feature2,lib1,lib3>")

An error will be raised here because both lib1 and lib3 are part of two

groups with different features.

When a target or an external library is involved in the link step as part of a group and also as not part of any group, any occurrence of the non-group link item will be replaced by the groups it belongs to.

add_library(lib1 ...) add_library(lib2 ...) add_library(lib3 ...) add_library(lib4 ...)

target_link_libraries(lib3 PUBLIC lib1)

target_link_libraries(lib4 PRIVATE lib3 "$<LINK_GROUP:feature1,lib1,lib2>")

lib4 will only be linked with lib3 and the group {lib1,lib2}

Because lib1 is part of the group defined for lib4, that group then gets applied back to the use of lib1 for lib3. The end result will be as though the linking relationship for lib3 had been specified as:

target_link_libraries(lib3 PUBLIC "$<LINK_GROUP:feature1,lib1,lib2>")

Be aware that the precedence of the group over the non-group link item can result in circular dependencies between groups. If this occurs, a fatal error is raised because circular dependencies are not allowed for groups.

add_library(lib1A ...) add_library(lib1B ...) add_library(lib2A ...) add_library(lib2B ...) add_library(lib3 ...)

Non-group linking relationships, these are non-circular so far

target_link_libraries(lib1A PUBLIC lib2A) target_link_libraries(lib2B PUBLIC lib1B)

The addition of these groups creates circular dependencies

target_link_libraries(lib3 PRIVATE "$<LINK_GROUP:feat,lib1A,lib1B>" "$<LINK_GROUP:feat,lib2A,lib2B>" )

Because of the groups defined for lib3, the linking relationships forlib1A and lib2B effectively get expanded to the equivalent of:

target_link_libraries(lib1A PUBLIC "$<LINK_GROUP:feat,lib2A,lib2B>") target_link_libraries(lib2B PUBLIC "$<LINK_GROUP:feat,lib1A,lib1B>")

This creates a circular dependency between groups:lib1A --> lib2B --> lib1A.

The following limitations should also be noted:

The library-list can specify CMake targets or libraries. Any CMake target of type OBJECTor INTERFACE will ignore the feature aspect of the expression and instead be linked in the standard way.
The $<LINK_GROUP:...> generator expression can only be used to specify link libraries. In practice, this means it can appear in theLINK_LIBRARIES, INTERFACE_LINK_LIBRARIES,andINTERFACE_LINK_LIBRARIES_DIRECT target properties, and be specified in target_link_libraries() and link_libraries()commands.
If a $<LINK_GROUP:...> generator expression appears in theINTERFACE_LINK_LIBRARIES property of a target, it will be included in the imported target generated by a install(EXPORT)command. It is the responsibility of the environment consuming this import to define the link feature used by this expression.

Link Context ¶

$<LINK_ONLY:...>¶

Added in version 3.1.

Content of ..., except while collecting usage requirements fromtransitive compile properties, in which case it is the empty string. This is intended for use in anINTERFACE_LINK_LIBRARIES target property, typically populated via the target_link_libraries() command, to specify private link dependencies without other usage requirements such as include directories or compile options.

Added in version 3.24: LINK_ONLY may also be used in a LINK_LIBRARIES target property. See policy CMP0131.

$<DEVICE_LINK:list>¶

Added in version 3.18.

Returns the list if it is the device link step, an empty list otherwise. The device link step is controlled by CUDA_SEPARABLE_COMPILATIONand CUDA_RESOLVE_DEVICE_SYMBOLS properties and policy CMP0105. This expression can only be used to specify link options.

$<HOST_LINK:list>¶

Added in version 3.18.

Returns the list if it is the normal link step, an empty list otherwise. This expression is mainly useful when a device link step is also involved (see $<DEVICE_LINK:list> generator expression). This expression can only be used to specify link options.

Target-Dependent Expressions ¶

Target Meta-Data ¶

These expressions look up information about a target.

$<TARGET_EXISTS:tgt>¶

Added in version 3.12.

1 if tgt exists as a CMake target, else 0.

$<TARGET_NAME_IF_EXISTS:tgt>¶

Added in version 3.12.

The target name tgt if the target exists, an empty string otherwise.

Note that tgt is not added as a dependency of the target this expression is evaluated on.

$<TARGET_NAME:tgt>¶

The target name tgt as written. This marks tgt as being the name of a target inside a larger expression, which is required if exporting targets to multiple dependent export sets. The tgt text must be a literal name of a target; it may not contain generator expressions. The target does not have to exist.

$<TARGET_POLICY:policy>¶

1 if the policy was NEW when the 'head' target was created, else 0. If the policy was not set, the warning message for the policy will be emitted. This generator expression only works for a subset of policies.

Target Properties ¶

These expressions look up the values oftarget properties.

$<TARGET_PROPERTY:tgt,prop>¶

Value of the property prop on the target tgt, or empty if the property is not set.

Note that tgt is not added as a dependency of the target this expression is evaluated on.

Changed in version 3.26: When encountered during evaluation of Target Usage Requirements, typically in an INTERFACE_* target property, lookup of the tgtname occurs in the directory of the target specifying the requirement, rather than the directory of the consuming target for which the expression is being evaluated.

$<TARGET_PROPERTY:prop>¶

Value of the property prop on the target for which the expression is being evaluated, or empty if the property is not set. Note that for generator expressions in Target Usage Requirementsthis is the consuming target rather than the target specifying the requirement.

The expressions have special evaluation rules for some properties:

Target Build Specification Properties

These evaluate as a semicolon-separated listrepresenting the union of the value on the target itself with the values of the corresponding Target Usage Requirements on targets named by the target's LINK_LIBRARIES:

For Target Compile Properties, evaluation of corresponding usage requirements is transitive over the closure of the linked targets'INTERFACE_LINK_LIBRARIES excluding entries guarded by theLINK_ONLY generator expression.
For Target Link Properties, evaluation of corresponding usage requirements is transitive over the closure of the linked targets'INTERFACE_LINK_LIBRARIES including entries guarded by theLINK_ONLY generator expression. See policy CMP0166.

Evaluation of LINK_LIBRARIES itself is not transitive.

Target Usage Requirement Properties

These evaluate as a semicolon-separated listrepresenting the union of the value on the target itself with the values of the same properties on targets named by the target'sINTERFACE_LINK_LIBRARIES:

For Transitive Compile Properties, evaluation is transitive over the closure of the target's INTERFACE_LINK_LIBRARIES excluding entries guarded by the LINK_ONLY generator expression.
For Transitive Link Properties, evaluation is transitive over the closure of the target's INTERFACE_LINK_LIBRARIES including entries guarded by the LINK_ONLY generator expression. See policy CMP0166.

Evaluation of INTERFACE_LINK_LIBRARIES itself is not transitive.

Custom Transitive Properties

Added in version 3.30.

These are processed during evaluation as follows:

Evaluation of $<TARGET_PROPERTY:tgt,PROP> for some propertyPROP, named without an INTERFACE_ prefix, checks the TRANSITIVE_COMPILE_PROPERTIESand TRANSITIVE_LINK_PROPERTIES properties on target tgt, on targets named by its LINK_LIBRARIES, and on the transitive closure of targets named by the linked targets'INTERFACE_LINK_LIBRARIES.
If PROP is listed by one of those properties, then it evaluates as a semicolon-separated list representing the union of the value on the target itself with the values of the corresponding INTERFACE_PROP on targets named by the target'sLINK_LIBRARIES:
- If PROP is named by TRANSITIVE_COMPILE_PROPERTIES, evaluation of the corresponding INTERFACE_PROP is transitive over the closure of the linked targets' INTERFACE_LINK_LIBRARIES, excluding entries guarded by the LINK_ONLY generator expression.
- If PROP is named by TRANSITIVE_LINK_PROPERTIES, evaluation of the corresponding INTERFACE_PROP is transitive over the closure of the linked targets' INTERFACE_LINK_LIBRARIES, including entries guarded by the LINK_ONLY generator expression.
Evaluation of $<TARGET_PROPERTY:tgt,INTERFACE_PROP> for some property INTERFACE_PROP, named with an INTERFACE_ prefix, checks the TRANSITIVE_COMPILE_PROPERTIESand TRANSITIVE_LINK_PROPERTIES properties on target tgt, and on the transitive closure of targets named by itsINTERFACE_LINK_LIBRARIES.
If the corresponding PROP is listed by one of those properties, then INTERFACE_PROP evaluates as asemicolon-separated list representing the union of the value on the target itself with the value of the same property on targets named by the target'sINTERFACE_LINK_LIBRARIES:
- If PROP is named by TRANSITIVE_COMPILE_PROPERTIES, evaluation of the corresponding INTERFACE_PROP is transitive over the closure of the target's INTERFACE_LINK_LIBRARIES, excluding entries guarded by the LINK_ONLY generator expression.
- If PROP is named by TRANSITIVE_LINK_PROPERTIES, evaluation of the corresponding INTERFACE_PROP is transitive over the closure of the target's INTERFACE_LINK_LIBRARIES, including entries guarded by the LINK_ONLY generator expression.

If a PROP is named by both TRANSITIVE_COMPILE_PROPERTIESand TRANSITIVE_LINK_PROPERTIES, the latter takes precedence.

Compatible Interface Properties

These evaluate as a single value combined from the target itself, from targets named by the target's LINK_LIBRARIES, and from the transitive closure of the linked targets'INTERFACE_LINK_LIBRARIES. Values of a compatible interface property from multiple targets combine based on the type of compatibility required by the COMPATIBLE_INTERFACE_* property defining it.

Target Artifacts ¶

These expressions look up information about artifacts associated with a given target tgt. Unless otherwise stated, this can be any runtime artifact, namely:

An executable target created by add_executable().
A shared library target (.so, .dll but not their .lib import library) created by add_library().
A static library target created by add_library().

In the following, the phrase "the tgt filename" means the name of thetgt binary file. This has to be distinguished from the phrase "the target name", which is just the string tgt.

$<TARGET_FILE:tgt>¶

Full path to the tgt binary file.

Note that tgt is not added as a dependency of the target this expression is evaluated on, unless the expression is being used inadd_custom_command() or add_custom_target().

$<TARGET_FILE_BASE_NAME:tgt>¶

Added in version 3.15.

Base name of tgt, i.e. $<TARGET_FILE_NAME:tgt> without prefix and suffix. For example, if the tgt filename is libbase.so, the base name is base.

See also the OUTPUT_NAME, ARCHIVE_OUTPUT_NAME,LIBRARY_OUTPUT_NAME and RUNTIME_OUTPUT_NAMEtarget properties and their configuration specific variantsOUTPUT_NAME_, ARCHIVE_OUTPUT_NAME_,LIBRARY_OUTPUT_NAME_ andRUNTIME_OUTPUT_NAME_.

The _POSTFIX and DEBUG_POSTFIX target properties can also be considered.

Note that tgt is not added as a dependency of the target this expression is evaluated on.

$<TARGET_FILE_PREFIX:tgt>¶

Added in version 3.15.

Prefix of the tgt filename (such as lib).

Export And Install Expressions ¶

$<INSTALL_INTERFACE:...>¶

Content of ... when the property is exported usinginstall(EXPORT), and empty otherwise.

$<BUILD_INTERFACE:...>¶

Content of ... when the property is exported using export(), or when the target is used by another target in the same buildsystem. Expands to the empty string otherwise.

$<BUILD_LOCAL_INTERFACE:...>¶

Added in version 3.26.

Content of ... when the target is used by another target in the same buildsystem. Expands to the empty string otherwise.

$<INSTALL_PREFIX>¶

Content of the install prefix when the target is exported viainstall(EXPORT), or when evaluated in theINSTALL_NAME_DIR property or the INSTALL_NAME_DIR argument ofinstall(RUNTIME_DEPENDENCY_SET), and empty otherwise.

Changed in version 3.27: Evaluates to the content of the install prefix in the code argument of install(CODE) or the file argument of install(SCRIPT).

Multi-level Expression Evaluation ¶

$<GENEX_EVAL:expr>¶

Added in version 3.12.

Content of expr evaluated as a generator expression in the current context. This enables consumption of generator expressions whose evaluation results itself in generator expressions.

$<TARGET_GENEX_EVAL:tgt,expr>¶

Added in version 3.12.

Content of expr evaluated as a generator expression in the context oftgt target. This enables consumption of custom target properties that themselves contain generator expressions.

Having the capability to evaluate generator expressions is very useful when you want to manage custom properties supporting generator expressions. For example:

add_library(foo ...)

set_property(TARGET foo PROPERTY CUSTOM_KEYS <<<CONFIG:DEBUG:FOO_EXTRA_THINGS> )

add_custom_target(printFooKeys COMMAND CMAKECOMMAND−Eecho{CMAKE_COMMAND} -E echo CMAKECOMMAND−Eecho<TARGET_PROPERTY:foo,CUSTOM_KEYS> )

This naive implementation of the printFooKeys custom command is wrong because CUSTOM_KEYS target property is not evaluated and the content is passed as is (i.e. $<$<CONFIG:DEBUG>:FOO_EXTRA_THINGS>).

To have the expected result (i.e. FOO_EXTRA_THINGS if config isDebug), it is required to evaluate the output of$<TARGET_PROPERTY:foo,CUSTOM_KEYS>:

add_custom_target(printFooKeys COMMAND ${CMAKE_COMMAND} -E echo <TARGETGENEXEVAL:foo,<TARGET_GENEX_EVAL:foo,<TARGETGENEXEVAL:foo,<TARGET_PROPERTY:foo,CUSTOM_KEYS>> )

Escaped Characters ¶

These expressions evaluate to specific string literals. Use them in place of the actual string literal where you need to prevent them from having their special meaning.

$¶

A literal >. Used for example to compare strings that contain a >.

$¶

A literal ,. Used for example to compare strings which contain a ,.

$¶

A literal ;. Used to prevent list expansion on an argument with ;.

$¶

Added in version 3.30.

A literal ". Used to allow string literal quotes inside a generator expression.

Deprecated Expressions ¶

$¶

Configuration name. Deprecated since CMake 3.0. Use CONFIG instead.