21.4.3.10 NDB Cluster TCP/IP Connections (original) (raw)

21.4.3.10 NDB Cluster TCP/IP Connections

TCP/IP is the default transport mechanism for all connections between nodes in an NDB Cluster. Normally it is not necessary to define TCP/IP connections; NDB Cluster automatically sets up such connections for all data nodes, management nodes, and SQL or API nodes.

To override the default connection parameters, it is necessary to define a connection using one or more[tcp] sections in theconfig.ini file. Each[tcp] section explicitly defines a TCP/IP connection between two NDB Cluster nodes, and must contain at a minimum the parametersNodeId1 andNodeId2, as well as any connection parameters to override.

It is also possible to change the default values for these parameters by setting them in the [tcp default] section.

Important

Any [tcp] sections in theconfig.ini file should be listed_last_, following all other sections in the file. However, this is not required for a [tcp default] section. This requirement is a known issue with the way in which the config.ini file is read by the NDB Cluster management server.

Connection parameters which can be set in[tcp] and [tcp default] sections of the config.ini file are listed here:

• Checksum

  Version (or later)	NDB 7.5.0
  Type or units	boolean
  Default	false
  Range	true, false
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  This parameter is a boolean parameter (enabled by setting it to Y or 1, disabled by setting it to N or 0). It is disabled by default. When it is enabled, checksums for all messages are calculated before they placed in the send buffer. This feature ensures that messages are not corrupted while waiting in the send buffer, or by the transport mechanism.

• Group
  Whenndb_optimized_node_selection is enabled, node proximity is used in some cases to select which node to connect to. This parameter can be used to influence proximity by setting it to a lower value, which is interpreted as “closer”. See the description of the system variable for more information.
• HostName1

  Version (or later)	NDB 7.5.0
  Type or units	name or IP address
  Default	[...]
  Range	...
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  The HostName1 andHostName2 parameters can be used to specify specific network interfaces to be used for a given TCP connection between two nodes. The values used for these parameters can be host names or IP addresses.

• HostName2

  Version (or later)	NDB 7.5.0
  Type or units	name or IP address
  Default	[...]
  Range	...
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  The HostName1 andHostName2 parameters can be used to specify specific network interfaces to be used for a given TCP connection between two nodes. The values used for these parameters can be host names or IP addresses.

• NodeId1

  Version (or later)	NDB 7.5.0
  Type or units	numeric
  Default	[none]
  Range	1 - 255
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  To identify a connection between two nodes it is necessary to provide their node IDs in the [tcp] section of the configuration file as the values ofNodeId1 andNodeId2. These are the same unique Id values for each of these nodes as described inSection 21.4.3.7, “Defining SQL and Other API Nodes in an NDB Cluster”.

• NodeId2

  Version (or later)	NDB 7.5.0
  Type or units	numeric
  Default	[none]
  Range	1 - 255
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  To identify a connection between two nodes it is necessary to provide their node IDs in the [tcp] section of the configuration file as the values ofNodeId1 andNodeId2. These are the same uniqueId values for each of these nodes as described in Section 21.4.3.7, “Defining SQL and Other API Nodes in an NDB Cluster”.

• NodeIdServer

  Version (or later)	NDB 7.5.0
  Type or units	numeric
  Default	[none]
  Range	1 - 63
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  Set the server side of a TCP connection.

• OverloadLimit

  Version (or later)	NDB 7.5.0
  Type or units	bytes
  Default	0
  Range	0 - 4294967039 (0xFFFFFEFF)
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  When more than this many unsent bytes are in the send buffer, the connection is considered overloaded.
  This parameter can be used to determine the amount of unsent data that must be present in the send buffer before the connection is considered overloaded. SeeSection 21.4.3.13, “Configuring NDB Cluster Send Buffer Parameters”, for more information.

• PortNumber (OBSOLETE)
  This parameter formerly specified the port number to be used for listening for connections from other nodes. It is now deprecated (and removed in NDB Cluster 7.5); use theServerPort data node configuration parameter for this purpose instead (Bug #77405, Bug #21280456).
• PreSendChecksum

  Version (or later)	NDB 7.6.6
  Type or units	boolean
  Default	false
  Range	true, false
  Added	NDB 7.6.6
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  If this parameter andChecksum are both enabled, perform pre-send checksum checks, and check all TCP signals between nodes for errors. Has no effect ifChecksum is not also enabled.

• Proxy

  Version (or later)	NDB 7.5.0
  Type or units	string
  Default	[...]
  Range	...
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  Set a proxy for the TCP connection.

• ReceiveBufferMemory

  Version (or later)	NDB 7.5.0
  Type or units	bytes
  Default	2M
  Range	16K - 4294967039 (0xFFFFFEFF)
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  Specifies the size of the buffer used when receiving data from the TCP/IP socket.
  The default value of this parameter is 2MB. The minimum possible value is 16KB; the theoretical maximum is 4GB.

• SendBufferMemory

  Version (or later)	NDB 7.5.0
  Type or units	unsigned
  Default	2M
  Range	256K - 4294967039 (0xFFFFFEFF)
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  TCP transporters use a buffer to store all messages before performing the send call to the operating system. When this buffer reaches 64KB its contents are sent; these are also sent when a round of messages have been executed. To handle temporary overload situations it is also possible to define a bigger send buffer.
  If this parameter is set explicitly, then the memory is not dedicated to each transporter; instead, the value used denotes the hard limit for how much memory (out of the total available memory—that is,TotalSendBufferMemory) that may be used by a single transporter. For more information about configuring dynamic transporter send buffer memory allocation in NDB Cluster, seeSection 21.4.3.13, “Configuring NDB Cluster Send Buffer Parameters”.
  The default size of the send buffer is 2MB, which is the size recommended in most situations. The minimum size is 64 KB; the theoretical maximum is 4 GB.

• SendSignalId

  Version (or later)	NDB 7.5.0
  Type or units	boolean
  Default	false (debug builds: true)
  Range	true, false
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  To be able to retrace a distributed message datagram, it is necessary to identify each message. When this parameter is set to Y, message IDs are transported over the network. This feature is disabled by default in production builds, and enabled in -debug builds.

• TcpBind_INADDR_ANY
  Setting this parameter to TRUE or1 binds IP_ADDR_ANY so that connections can be made from anywhere (for autogenerated connections). The default isFALSE (0).
• TCP_MAXSEG_SIZE

  Version (or later)	NDB 7.5.0
  Type or units	unsigned
  Default	0
  Range	0 - 2G
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  Determines the size of the memory set during TCP transporter initialization. The default is recommended for most common usage cases.

• TCP_RCV_BUF_SIZE

  Version (or later)	NDB 7.5.0
  Type or units	unsigned
  Default	0
  Range	0 - 2G
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  Determines the size of the receive buffer set during TCP transporter initialization. The default and minimum value is 0, which allows the operating system or platform to set this value. The default is recommended for most common usage cases.

• TCP_SND_BUF_SIZE

  Version (or later)	NDB 7.5.0
  Type or units	unsigned
  Default	0
  Range	0 - 2G
  Restart Type	**Node Restart:**Requires arolling restart of the cluster. (NDB 7.5.0)
  Determines the size of the send buffer set during TCP transporter initialization. The default and minimum value is 0, which allows the operating system or platform to set this value. The default is recommended for most common usage cases.

Restart types. Information about the restart types used by the parameter descriptions in this section is shown in the following table:

Table 21.19 NDB Cluster restart types