select — Waiting for I/O completion (original) (raw)
This module provides access to the select() and poll() functions available in most operating systems, devpoll() available on Solaris and derivatives, epoll() available on Linux 2.5+ andkqueue() available on most BSD. Note that on Windows, it only works for sockets; on other operating systems, it also works for other file types (in particular, on Unix, it works on pipes). It cannot be used on regular files to determine whether a file has grown since it was last read.
Note
The selectors module allows high-level and efficient I/O multiplexing, built upon the select module primitives. Users are encouraged to use the selectors module instead, unless they want precise control over the OS-level primitives used.
The module defines the following:
exception select.error¶
A deprecated alias of OSError.
Changed in version 3.3: Following PEP 3151, this class was made an alias of OSError.
select.devpoll()¶
(Only supported on Solaris and derivatives.) Returns a /dev/pollpolling object; see section /dev/poll Polling Objects below for the methods supported by devpoll objects.
devpoll() objects are linked to the number of file descriptors allowed at the time of instantiation. If your program reduces this value, devpoll() will fail. If your program increases this value, devpoll() may return an incomplete list of active file descriptors.
The new file descriptor is non-inheritable.
Added in version 3.3.
Changed in version 3.4: The new file descriptor is now non-inheritable.
select.epoll(sizehint=-1, flags=0)¶
(Only supported on Linux 2.5.44 and newer.) Return an edge polling object, which can be used as Edge or Level Triggered interface for I/O events.
sizehint informs epoll about the expected number of events to be registered. It must be positive, or -1 to use the default. It is only used on older systems where epoll_create1() is not available; otherwise it has no effect (though its value is still checked).
flags is deprecated and completely ignored. However, when supplied, its value must be 0 or select.EPOLL_CLOEXEC, otherwise OSError is raised.
See the Edge and Level Trigger Polling (epoll) Objects section below for the methods supported by epolling objects.
epoll objects support the context management protocol: when used in awith statement, the new file descriptor is automatically closed at the end of the block.
The new file descriptor is non-inheritable.
Changed in version 3.3: Added the flags parameter.
Changed in version 3.4: Support for the with statement was added. The new file descriptor is now non-inheritable.
Deprecated since version 3.4: The flags parameter. select.EPOLL_CLOEXEC is used by default now. Use os.set_inheritable() to make the file descriptor inheritable.
select.poll()¶
(Not supported by all operating systems.) Returns a polling object, which supports registering and unregistering file descriptors, and then polling them for I/O events; see section Polling Objects below for the methods supported by polling objects.
select.kqueue()¶
(Only supported on BSD.) Returns a kernel queue object; see sectionKqueue Objects below for the methods supported by kqueue objects.
The new file descriptor is non-inheritable.
Changed in version 3.4: The new file descriptor is now non-inheritable.
select.kevent(ident, filter=KQ_FILTER_READ, flags=KQ_EV_ADD, fflags=0, data=0, udata=0)¶
(Only supported on BSD.) Returns a kernel event object; see sectionKevent Objects below for the methods supported by kevent objects.
select.select(rlist, wlist, _xlist_[, _timeout_])¶
This is a straightforward interface to the Unix select() system call. The first three arguments are iterables of ‘waitable objects’: either integers representing file descriptors or objects with a parameterless method named fileno() returning such an integer:
- rlist: wait until ready for reading
- wlist: wait until ready for writing
- xlist: wait for an “exceptional condition” (see the manual page for what your system considers such a condition)
Empty iterables are allowed, but acceptance of three empty iterables is platform-dependent. (It is known to work on Unix but not on Windows.) The optional timeout argument specifies a time-out as a floating-point number in seconds. When the timeout argument is omitted the function blocks until at least one file descriptor is ready. A time-out value of zero specifies a poll and never blocks.
The return value is a triple of lists of objects that are ready: subsets of the first three arguments. When the time-out is reached without a file descriptor becoming ready, three empty lists are returned.
Among the acceptable object types in the iterables are Python file objects (e.g. sys.stdin, or objects returned byopen() or os.popen()), socket objects returned bysocket.socket(). You may also define a wrapper class yourself, as long as it has an appropriate fileno() method (that really returns a file descriptor, not just a random integer).
Note
File objects on Windows are not acceptable, but sockets are. On Windows, the underlying select() function is provided by the WinSock library, and does not handle file descriptors that don’t originate from WinSock.
Changed in version 3.5: The function is now retried with a recomputed timeout when interrupted by a signal, except if the signal handler raises an exception (seePEP 475 for the rationale), instead of raisingInterruptedError.
select.PIPE_BUF¶
The minimum number of bytes which can be written without blocking to a pipe when the pipe has been reported as ready for writing by select(),poll() or another interface in this module. This doesn’t apply to other kind of file-like objects such as sockets.
This value is guaranteed by POSIX to be at least 512.
Added in version 3.2.
/dev/poll Polling Objects¶
Solaris and derivatives have /dev/poll. While select() is_O_(highest file descriptor) and poll() is O(number of file descriptors), /dev/poll is O(active file descriptors).
/dev/poll behaviour is very close to the standard poll()object.
devpoll.close()¶
Close the file descriptor of the polling object.
Added in version 3.4.
devpoll.closed¶
True if the polling object is closed.
Added in version 3.4.
devpoll.fileno()¶
Return the file descriptor number of the polling object.
Added in version 3.4.
devpoll.register(_fd_[, _eventmask_])¶
Register a file descriptor with the polling object. Future calls to thepoll() method will then check whether the file descriptor has any pending I/O events. fd can be either an integer, or an object with afileno() method that returns an integer. File objects implement fileno(), so they can also be used as the argument.
eventmask is an optional bitmask describing the type of events you want to check for. The constants are the same that with poll()object. The default value is a combination of the constants POLLIN,POLLPRI, and POLLOUT.
Warning
Registering a file descriptor that’s already registered is not an error, but the result is undefined. The appropriate action is to unregister or modify it first. This is an important difference compared with poll().
devpoll.modify(_fd_[, _eventmask_])¶
This method does an unregister() followed by aregister(). It is (a bit) more efficient that doing the same explicitly.
devpoll.unregister(fd)¶
Remove a file descriptor being tracked by a polling object. Just like theregister() method, fd can be an integer or an object with afileno() method that returns an integer.
Attempting to remove a file descriptor that was never registered is safely ignored.
devpoll.poll([_timeout_])¶
Polls the set of registered file descriptors, and returns a possibly empty list containing (fd, event) 2-tuples for the descriptors that have events or errors to report. fd is the file descriptor, and event is a bitmask with bits set for the reported events for that descriptor — POLLIN for waiting input, POLLOUT to indicate that the descriptor can be written to, and so forth. An empty list indicates that the call timed out and no file descriptors had any events to report. If timeout is given, it specifies the length of time in milliseconds which the system will wait for events before returning. If timeout is omitted, -1, or None, the call will block until there is an event for this poll object.
Changed in version 3.5: The function is now retried with a recomputed timeout when interrupted by a signal, except if the signal handler raises an exception (seePEP 475 for the rationale), instead of raisingInterruptedError.
Edge and Level Trigger Polling (epoll) Objects¶
https://linux.die.net/man/4/epoll
eventmask
Constant Meaning EPOLLIN Available for read EPOLLOUT Available for write EPOLLPRI Urgent data for read EPOLLERR Error condition happened on the assoc. fd EPOLLHUP Hang up happened on the assoc. fd EPOLLET Set Edge Trigger behavior, the default is Level Trigger behavior EPOLLONESHOT Set one-shot behavior. After one event is pulled out, the fd is internally disabled EPOLLEXCLUSIVE Wake only one epoll object when the associated fd has an event. The default (if this flag is not set) is to wake all epoll objects polling on a fd. EPOLLRDHUP Stream socket peer closed connection or shut down writing half of connection. EPOLLRDNORM Equivalent to EPOLLIN EPOLLRDBAND Priority data band can be read. EPOLLWRNORM Equivalent to EPOLLOUT EPOLLWRBAND Priority data may be written. EPOLLMSG Ignored. Added in version 3.6:
EPOLLEXCLUSIVEwas added. It’s only supported by Linux Kernel 4.5 or later.
epoll.close()¶
Close the control file descriptor of the epoll object.
epoll.closed¶
True if the epoll object is closed.
epoll.fileno()¶
Return the file descriptor number of the control fd.
epoll.fromfd(fd)¶
Create an epoll object from a given file descriptor.
epoll.register(_fd_[, _eventmask_])¶
Register a fd descriptor with the epoll object.
epoll.modify(fd, eventmask)¶
Modify a registered file descriptor.
epoll.unregister(fd)¶
Remove a registered file descriptor from the epoll object.
Changed in version 3.9: The method no longer ignores the EBADF error.
epoll.poll(timeout=None, maxevents=-1)¶
Wait for events. timeout in seconds (float)
Changed in version 3.5: The function is now retried with a recomputed timeout when interrupted by a signal, except if the signal handler raises an exception (seePEP 475 for the rationale), instead of raisingInterruptedError.
Polling Objects¶
The poll() system call, supported on most Unix systems, provides better scalability for network servers that service many, many clients at the same time. poll() scales better because the system call only requires listing the file descriptors of interest, while select() builds a bitmap, turns on bits for the fds of interest, and then afterward the whole bitmap has to be linearly scanned again. select() is O(highest file descriptor), whilepoll() is O(number of file descriptors).
poll.register(_fd_[, _eventmask_])¶
Register a file descriptor with the polling object. Future calls to thepoll() method will then check whether the file descriptor has any pending I/O events. fd can be either an integer, or an object with afileno() method that returns an integer. File objects implement fileno(), so they can also be used as the argument.
eventmask is an optional bitmask describing the type of events you want to check for, and can be a combination of the constants POLLIN,POLLPRI, and POLLOUT, described in the table below. If not specified, the default value used will check for all 3 types of events.
| Constant | Meaning |
|---|---|
| POLLIN | There is data to read |
| POLLPRI | There is urgent data to read |
| POLLOUT | Ready for output: writing will not block |
| POLLERR | Error condition of some sort |
| POLLHUP | Hung up |
| POLLRDHUP | Stream socket peer closed connection, or shut down writing half of connection |
| POLLNVAL | Invalid request: descriptor not open |
Registering a file descriptor that’s already registered is not an error, and has the same effect as registering the descriptor exactly once.
poll.modify(fd, eventmask)¶
Modifies an already registered fd. This has the same effect asregister(fd, eventmask). Attempting to modify a file descriptor that was never registered causes an OSError exception with errnoENOENT to be raised.
poll.unregister(fd)¶
Remove a file descriptor being tracked by a polling object. Just like theregister() method, fd can be an integer or an object with afileno() method that returns an integer.
Attempting to remove a file descriptor that was never registered causes aKeyError exception to be raised.
poll.poll([_timeout_])¶
Polls the set of registered file descriptors, and returns a possibly empty list containing (fd, event) 2-tuples for the descriptors that have events or errors to report. fd is the file descriptor, and event is a bitmask with bits set for the reported events for that descriptor — POLLIN for waiting input, POLLOUT to indicate that the descriptor can be written to, and so forth. An empty list indicates that the call timed out and no file descriptors had any events to report. If timeout is given, it specifies the length of time in milliseconds which the system will wait for events before returning. If timeout is omitted, negative, or None, the call will block until there is an event for this poll object.
Changed in version 3.5: The function is now retried with a recomputed timeout when interrupted by a signal, except if the signal handler raises an exception (seePEP 475 for the rationale), instead of raisingInterruptedError.
Kqueue Objects¶
kqueue.close()¶
Close the control file descriptor of the kqueue object.
kqueue.closed¶
True if the kqueue object is closed.
kqueue.fileno()¶
Return the file descriptor number of the control fd.
kqueue.fromfd(fd)¶
Create a kqueue object from a given file descriptor.
kqueue.control(changelist, _max_events_[, _timeout_]) → eventlist¶
Low level interface to kevent
- changelist must be an iterable of kevent objects or
None - max_events must be 0 or a positive integer
- timeout in seconds (floats possible); the default is
None, to wait forever
Changed in version 3.5: The function is now retried with a recomputed timeout when interrupted by a signal, except if the signal handler raises an exception (seePEP 475 for the rationale), instead of raisingInterruptedError.
Kevent Objects¶
https://man.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2
kevent.ident¶
Value used to identify the event. The interpretation depends on the filter but it’s usually the file descriptor. In the constructor ident can either be an int or an object with a fileno() method. kevent stores the integer internally.
kevent.filter¶
Name of the kernel filter.
| Constant | Meaning |
|---|---|
| KQ_FILTER_READ | Takes a descriptor and returns whenever there is data available to read |
| KQ_FILTER_WRITE | Takes a descriptor and returns whenever there is data available to write |
| KQ_FILTER_AIO | AIO requests |
| KQ_FILTER_VNODE | Returns when one or more of the requested events watched in fflag occurs |
| KQ_FILTER_PROC | Watch for events on a process id |
| KQ_FILTER_NETDEV | Watch for events on a network device [not available on macOS] |
| KQ_FILTER_SIGNAL | Returns whenever the watched signal is delivered to the process |
| KQ_FILTER_TIMER | Establishes an arbitrary timer |
kevent.flags¶
Filter action.
| Constant | Meaning |
|---|---|
| KQ_EV_ADD | Adds or modifies an event |
| KQ_EV_DELETE | Removes an event from the queue |
| KQ_EV_ENABLE | Permitscontrol() to returns the event |
| KQ_EV_DISABLE | Disablesevent |
| KQ_EV_ONESHOT | Removes event after first occurrence |
| KQ_EV_CLEAR | Reset the state after an event is retrieved |
| KQ_EV_SYSFLAGS | internal event |
| KQ_EV_FLAG1 | internal event |
| KQ_EV_EOF | Filter specific EOF condition |
| KQ_EV_ERROR | See return values |
kevent.fflags¶
Filter specific flags.
KQ_FILTER_READ and KQ_FILTER_WRITE filter flags:
| Constant | Meaning |
|---|---|
| KQ_NOTE_LOWAT | low water mark of a socket buffer |
KQ_FILTER_VNODE filter flags:
| Constant | Meaning |
|---|---|
| KQ_NOTE_DELETE | unlink() was called |
| KQ_NOTE_WRITE | a write occurred |
| KQ_NOTE_EXTEND | the file was extended |
| KQ_NOTE_ATTRIB | an attribute was changed |
| KQ_NOTE_LINK | the link count has changed |
| KQ_NOTE_RENAME | the file was renamed |
| KQ_NOTE_REVOKE | access to the file was revoked |
KQ_FILTER_PROC filter flags:
| Constant | Meaning |
|---|---|
| KQ_NOTE_EXIT | the process has exited |
| KQ_NOTE_FORK | the process has called fork() |
| KQ_NOTE_EXEC | the process has executed a new process |
| KQ_NOTE_PCTRLMASK | internal filter flag |
| KQ_NOTE_PDATAMASK | internal filter flag |
| KQ_NOTE_TRACK | follow a process across fork() |
| KQ_NOTE_CHILD | returned on the child process for_NOTE_TRACK_ |
| KQ_NOTE_TRACKERR | unable to attach to a child |
KQ_FILTER_NETDEV filter flags (not available on macOS):
| Constant | Meaning |
|---|---|
| KQ_NOTE_LINKUP | link is up |
| KQ_NOTE_LINKDOWN | link is down |
| KQ_NOTE_LINKINV | link state is invalid |
kevent.data¶
Filter specific data.
kevent.udata¶
User defined value.