Initialize Learnable Parameters for Model Function - MATLAB & Simulink (original) (raw)

When you train a network using layers arrays or dlnetwork objects, the software automatically initializes the learnable parameters according to the layer initialization properties. When you define a deep learning model as a function, you must initialize the learnable parameters manually.

How you initialize learnable parameters (for example, weights and biases) can have a big impact on how quickly a deep learning model converges.

Tip

This topic explains how to initialize learnable parameters for a deep learning model defined a function in a custom training loop. To learn how to specify the learnable parameter initialization for a deep learning layer, use the corresponding layer property. For example, to set the weights initializer of a convolution2dLayer object, use the WeightsInitializer property.

Default Layer Initializations

This table shows the default initializations for the learnable parameters for each layer, and provides links that show how to initialize learnable parameters for model functions by using the same initialization.

Learnable Parameter Sizes

When initializing learnable parameters for model functions, you must specify parameters of the correct size. The size of the learnable parameters depends on the type of deep learning operation.

Glorot Initialization

The Glorot (also known as Xavier) initializer [1] samples weights from the uniform distribution with bounds [−6No+Ni,6No+Ni], where the values of No and_Ni_ depend on the type of deep learning operation.

To initialize learnable parameters using the Glorot initializer easily, you can define a custom function. The function initializeGlorot takes as input the size of the learnable parameters sz and the values_No_ and_Ni_ (numOut andnumIn, respectively), and returns the sampled weights as adlarray object with underlying type'single'.

function weights = initializeGlorot(sz,numOut,numIn)

Z = 2*rand(sz,'single') - 1; bound = sqrt(6 / (numIn + numOut));

weights = bound * Z; weights = dlarray(weights);

end

Example

Initialize the weights for a convolutional operation with 128 filters of size 5-by-5 and 3 input channels.

filterSize = [5 5]; numChannels = 3; numFilters = 128;

sz = [filterSize numChannels numFilters]; numOut = prod(filterSize) * numFilters; numIn = prod(filterSize) * numChannels;

parameters.conv.Weights = initializeGlorot(sz,numOut,numIn);

He Initialization

The He initializer [2] samples weights from the normal distribution with zero mean and variance 2Ni, where the value Ni depends on the type of deep learning operation.

To initialize learnable parameters using the He initializer easily, you can define a custom function. The function initializeHe takes as input the size of the learnable parameters sz, and the value_Ni_, and returns the sampled weights as a dlarray object with underlying type'single'.

function weights = initializeHe(sz,numIn)

weights = randn(sz,'single') * sqrt(2/numIn); weights = dlarray(weights);

end

Example

Initialize the weights for a convolutional operation with 128 filters of size 5-by-5 and 3 input channels.

filterSize = [5 5]; numChannels = 3; numFilters = 128;

sz = [filterSize numChannels numFilters]; numIn = prod(filterSize) * numChannels;

parameters.conv.Weights = initializeHe(sz,numIn);

Gaussian Initialization

The Gaussian initializer samples weights from a normal distribution.

To initialize learnable parameters using the Gaussian initializer easily, you can define a custom function. The function initializeGaussian takes as input the size of the learnable parameters sz, the distribution meanmu, and the distribution standard deviationsigma, and returns the sampled weights as adlarray object with underlying type'single'.

function weights = initializeGaussian(sz,mu,sigma)

weights = randn(sz,'single')*sigma + mu; weights = dlarray(weights);

end

Example

Initialize the weights for an embedding operation with a dimension of 300 and vocabulary size of 5000 using the Gaussian initializer with mean 0 and standard deviation 0.01.

embeddingDimension = 300; vocabularySize = 5000; mu = 0; sigma = 0.01;

sz = [embeddingDimension vocabularySize];

parameters.emb.Weights = initializeGaussian(sz,mu,sigma);

Uniform Initialization

The uniform initializer samples weights from a uniform distribution.

To initialize learnable parameters using the uniform initializer easily, you can define a custom function. The function initializeUniform takes as input the size of the learnable parameters sz, and the distribution bound bound, and returns the sampled weights as adlarray object with underlying type'single'.

function parameter = initializeUniform(sz,bound)

Z = 2*rand(sz,'single') - 1; parameter = bound * Z; parameter = dlarray(parameter);

end

Example

Initialize the weights for an attention mechanism with size 100-by-100 and bound 0.1 using the uniform initializer.

sz = [100 100]; bound = 0.1;

parameters.attentionn.Weights = initializeUniform(sz,bound);

Orthogonal Initialization

The orthogonal initializer returns the orthogonal matrix Q given by the QR decomposition of Z = QR, where Z is sampled from a unit normal distribution and the size of Z matches the size of the learnable parameter.

To initialize learnable parameters using the orthogonal initializer easily, you can define a custom function. The function initializeOrthogonal takes as input the size of the learnable parameters sz, and returns the orthogonal matrix as a dlarray object with underlying type'single'.

function parameter = initializeOrthogonal(sz)

Z = randn(sz,'single'); [Q,R] = qr(Z,0);

D = diag(R); Q = Q * diag(D ./ abs(D));

parameter = dlarray(Q);

end

Example

Initialize the recurrent weights for an LSTM operation with 100 hidden units using the orthogonal initializer.

numHiddenUnits = 100;

sz = [4*numHiddenUnits numHiddenUnits];

parameters.lstm.RecurrentWeights = initializeOrthogonal(sz);

Unit Forget Gate Initialization

The unit forget gate initializer initializes the bias for an LSTM operation such that the forget gate component of the biases are ones and the remaining entries are zeros.

To initialize learnable parameters using the orthogonal initializer easily, you can define a custom function. The function initializeUnitForgetGate takes as input the number of hidden units in the LSTM operation, and returns the bias as adlarray object with underlying type'single'.

function bias = initializeUnitForgetGate(numHiddenUnits)

bias = zeros(4*numHiddenUnits,1,'single');

idx = numHiddenUnits+1:2*numHiddenUnits; bias(idx) = 1;

bias = dlarray(bias);

end

Example

Initialize the bias of an LSTM operation with 100 hidden units using the unit forget gate initializer.

numHiddenUnits = 100;

parameters.lstm.Bias = initializeUnitForgetGate(numHiddenUnits,'single');

Ones Initialization

To initialize learnable parameters with ones easily, you can define a custom function. The function initializeOnes takes as input the size of the learnable parameters sz, and returns the parameters as adlarray object with underlying type'single'.

function parameter = initializeOnes(sz)

parameter = ones(sz,'single'); parameter = dlarray(parameter);

end

Example

Initialize the scale for a batch normalization operation with 128 input channels with ones.

numChannels = 128;

sz = [numChannels 1];

parameters.bn.Scale = initializeOnes(sz);

Zeros Initialization

To initialize learnable parameters with zeros easily, you can define a custom function. The function initializeZeros takes as input the size of the learnable parameters sz, and returns the parameters as adlarray object with underlying type'single'.

function parameter = initializeZeros(sz)

parameter = zeros(sz,'single'); parameter = dlarray(parameter);

end

Example

Initialize the offset for a batch normalization operation with 128 input channels with zeros.

numChannels = 128;

sz = [numChannels 1];

parameters.bn.Offset = initializeZeros(sz);

Storing Learnable Parameters

It is recommended to store the learnable parameters for a given model function in a single object, such as a structure, table, or cell array. For an example showing how to initialize learnable parameters as a struct, see Train Network Using Model Function.

Storing Parameters on GPU

If you train your model using a GPU, then the software converts the learnable parameters of the model function to gpuArray objects which are stored on the GPU.

To make it easier to load learnable parameters on machines without a GPU, it is recommended practice to gather all the parameters to the local workspace before saving them. To gather learnable parameters stored as a structure, table, or cell array of dlarray objects, use the dlupdate function with the gather function. For example, if you have network learnable parameters stored on the GPU in the structure, table, or cell array parameters, you can transfer the parameters to the local workspace by using the following code:

parameters = dlupdate(@gather,parameters);

If you load learnable parameters that are not on the GPU, you can move the parameters onto the GPU using the dlupdate function with thegpuArray function. Doing so ensures that your network executes on the GPU for training and inference, regardless of where the input data is stored. For example, to move the parameters stored in the structure, table, or cell array parameters, you can transfer the parameters to the GPU by using the following code:

parameters = dlupdate(@gpuArray,parameters);

References

[1] Glorot, Xavier, and Yoshua Bengio. "Understanding the Difficulty of Training Deep Feedforward Neural Networks." In Proceedings of the Thirteenth International Conference on Artificial Intelligence and Statistics, 249–356. Sardinia, Italy: AISTATS, 2010. https://proceedings.mlr.press/v9/glorot10a/glorot10a.pdf

[2] He, Kaiming, Xiangyu Zhang, Shaoqing Ren, and Jian Sun. "Delving Deep into Rectifiers: Surpassing Human-Level Performance on ImageNet Classification." In 2015 IEEE International Conference on Computer Vision (ICCV), 1026–34. Santiago, Chile: IEEE, 2015. https://doi.org/10.1109/ICCV.2015.123

See Also

dlarray | dlgradient | dlfeval | dlnetwork

Related Topics

• Train Network Using Model Function
• Define Custom Training Loops, Loss Functions, and Networks
• Define Model Loss Function for Custom Training Loop
• Update Batch Normalization Statistics Using Model Function
• Make Predictions Using Model Function
• Train Network Using Custom Training Loop
• Specify Training Options in Custom Training Loop
• List of Functions with dlarray Support