white light sources (original) (raw)

Definition: light sources with very broad optical bandwidth

Categories: photonic devices, non-laser light sources

• light sources
  • incandescent lamps
  • gas discharge lamps
  • light-emitting diodes
  • lasers
  • light sources based on nonlinear optical effects
  • superluminescent sources
  • quantum light sources
  • white light sources
  • wavelength-tunable light sources
  • RGB sources
  • CIE standard illuminants
  • natural light sources
  • (more topics)

Related: white lightbandwidtharc lampssupercontinuum generationwhite light interferometersinterferometerssuperluminescent sourcesamplified spontaneous emissionspectroscopycolor temperature

Page views in 12 months: 1337

DOI: 10.61835/hd5 Cite the article: BibTex BibLaTex plain textHTML Link to this page! LinkedIn

Content quality and neutrality are maintained according to our editorial policy.

📦 For purchasing white light sources, use the RP Photonics Buyer's Guide — an expert-curated directory for finding all relevant suppliers, which also offers advanced purchasing assistance.

Contents

What are White Light Sources?

A white light source is usually understood to be a light source generating white light, i.e., light with a white perception for the human eye. In some cases, the term is generalized to broadband light sources in other spectral regions, such as the infrared.

Some typical types of white light sources are explained in the following:

• Incandescent lamps (e.g., a tungsten-halogen lamps) naturally emit light with a smooth and very broad optical spectrum. They are cheap to fabricate and easy to handle, but have a quite limited luminous efficacy. The lifetime is also often less than satisfactory.
• Some types of gas discharge lamps, in particular high-pressure arc lamps and flash lamps, for example xenon lamps, can produce bright white light. Metal halide lamps offer particularly high performance in terms of radiance and luminous efficacy. Device lifetimes vary strongly, depending on the type of lamps and its operation conditions.
• Spectra of fluorescent lamps or some other gas discharge lamps can also look white but are sometimes much more structured. Such white light sources often have a low color rendering index.
• Light-emitting diodes (LEDs) in a strict sense cannot generate white light, but there are LED-based white light emitters (often called white LEDs), which mostly contain a blue (GaN-based) LED and a phosphor which absorbs part of the blue light and emits fluorescence at longer wavelengths, so that the overall color impression is white. It is also possible to combine the radiation e.g. of LEDs emitting red, green and blue light.
• Lasers are not suitable for directly generating white light. However, there are laser-based RGB sources, and by mixing their red, green and blue outputs, one can obtain intense white light.

Various CIE standard illuminants serve as standard references for different types of white light spectra.

Essential Properties of White Light Sources

The following properties of white light sources are often particularly important for applications:

• For applications like lighting, the color temperature of a white light source, indicating its color tone, is an important parameter.
• The color rendering index (CRI) is a measure of how well colors can be judged when objects are illuminated with that light.
• Concerning energy efficiency, the luminous efficacy is an important parameter. Note that the effectively achieved energy efficiency can also substantially depend on how directional the light emission is. For example, the energy-saving qualities of LED-based solutions often come to a substantial degree from their directed emission, making it easier to send the light where it is needed.
• The temporal coherence of any white light source is necessarily low as a consequence of its broad optical bandwidth.
• Many white light sources also have a low spatial coherence, making it difficult to tightly focus the light, and a correspondingly low radiance. For example, that applies to long-arc lamps, having a large light-emitting volume. A low radiance is usually no problem for applications like lighting, but is not acceptable for applications like projection displays. Higher radiance can be achieved with short-arc lamps, which are operated with high power densities (high intensity discharge lamps).
• Most white light sources operate continuously, some others are made for pulsed emission — in particular, flash lamps.

Our properties of interest may be the operation lifetime, the ability of rapid switching, the constancy of the radiant flux (low intensity noise, weak aging, weak temperature dependence), the constancy of the spectral shape and color tone, and the absence of possibly disturbing ultraviolet light.

Applications of White Light Sources

Many white light sources are required for various lighting applications (indoor and outdoor), where one often needs to generate a substantial luminous flux over extended times. The energy efficiency, largely determined by the luminous efficacy, is then particularly important.

There are various other applications in the context of illumination, often in a somewhat localized manner — for example, reading lights, projection displays, machine vision and microscope illumination.

Pulsed white light sources can be used for photography, for stroboscopes and in some scientific applications.

Further, there are special applications of white light sources in scientific and technical areas such as spectroscopy, colorimetry, forensic investigations and solar cell testing.

Other Broadband Light Sources

In some cases, the term white light sources is used for sources which do not really produce a white color impression, but just produce light with a broad optical bandwidth. Some of them do not even emit in the visible spectral range, while others cover a range from somewhere in the infrared to the ultraviolet. Certain applications such as white light interferometry do not really need a white color impression, but just the large bandwidth. Other examples of applications are the characterization of optical components and spectroscopy.

While most white light sources have a poor spatial coherence, there are broadband sources with a high spatial coherence, sometimes even with the whole optical power delivered in a single spatial mode e.g. of an optical fiber. This allows focusing of the radiation to very small spots. Such sources can be different types of superluminescent sources, e.g. superluminescent diodes or ASE sources based on rare-earth-doped fibers.

For particularly high bandwidths, sometimes even more than octave-spanning, one may employ supercontinuum sources, based on strongly nonlinear interactions e.g. in an optical fiber. Most widely used for those are photonic crystal fibers. The input light can be supplied in the form ultrashort pulses, nanosecond pulses, or continuously.

For some applications, the optical bandwidth specified as a full-width half-maximum value is important, whereas weak tails in the spectrum are not relevant. In other cases, it is only important to have at least some moderate level of power spectral density over a broad range, even if the spectral flux varies a lot within that range.

Suppliers

Sponsored content: The RP Photonics Buyer's Guide contains 33 suppliers for white light sources. Among them:

⚙ hardware

Thorlabs manufacturers multiple white light sources including incoherent lamps as well as laser systems for the VIS-NIR and mid-IR spectral regions. Our VIS-NIR supercontinuum generation kit can be used with an existing femtosecond pump laser, while our SC4500 mid-IR supercontinuum laser offers an all-fiber turn-key solution providing coverage from 1.3 — 4.5 µm. Its long-wave supercontinuum cousin, LWIRSC, offers >20 mW output power over the 3.5 — 11 µm range.

⚙ hardware

Our fiber-coupled light sources LS-HP1, LS-WL1, LS-BB1 and LS-MC1 are perfect sources for every lab:

• The laser-pumped white light source LS-WL1 owes its extremely high luminance to two blue laser diodes that pump a ceramic phosphor converter.
• Our latest light source is the LS-HP1 high-power light source. It is available in a monochromatic and a white light version and is exceptionally powerful.
• Furthermore, our broadband LED light source LS-BB1 covers the large spectrum from VIS to NIR with a single LED, making it a real alternative to halogen-based light sources.
• The LS-MC1 series ensures high luminance and supports many different wavelengths.

Typical applications are in high-speed imaging, endoscopy, semiconductor inspection, confocal measurements and camera flare analysis.

⚙ hardware

ELECTRO VIS is the latest LEUKOS development. Optimized for long lifetime, power in the visible and ease of use, ELECTROVIS is a high end, short-pulse high-tech device. Ideal for applications where reliability is essential while cost matters.

See our data sheet.

⚙ hardware

Horizon is a next-generation supercontinuum fiber laser that delivers exceptional performance for spectroscopy and imaging. It's ultra-flat spectrum, free of spurious spectral peaks, spans an impressive spectral range of 450 to 2300 nm, providing < 3 W of average power and ≥ 250 mW average power in the visible range.

With outstanding spatial coherence, broad spectral coverage, and superior spectral flatness, Horizon outperforms traditional supercontinuum sources.

⚙ hardware

Imagine the brightness of a laser with the spectrum of a lamp. Our turnkey SuperK white light lasers deliver bright diffraction-limited light from 400–2400 nm. Fiber delivered and collimated. They have a lifetime of several thousand hours and high power output from 400 to 2400 nm. They are robust and reliable, built for intensive use, and can replace multiple single-line lasers and broadband sources like ASE sources, SLEDs, and lamps.

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.