Guy CESAR - Academia.edu (original) (raw)

Papers by Guy CESAR

Chimie verte, 2018

Certains materiaux ont la possibilite de subir une decomposition naturelle rapide en etant « cons... more Certains materiaux ont la possibilite de subir une decomposition naturelle rapide en etant « consommes » par des bacteries, des champignons, des algues, des insectes, etc. C'est donc une alternative au mode de valorisation par recyclage (et donc de recuperation d'energie). Cet article se propose tout d’abord d’expliciter les etapes de la biodegradation en detaillant les principales reactions, les facteurs impliques ainsi que les methodes de mesure utilisees ; sont ensuite presentes les differents materiaux biodegradables issus de polymeres naturels ou artificiels, et les principales applications industrielles des polymeres biodegradables.

Journal of Polymers and the Environment, 2017

Three black biodegradable films based on PBAT-blends (PBAT/PLA, PBAT/PPC and PBAT/Starch) were te... more Three black biodegradable films based on PBAT-blends (PBAT/PLA, PBAT/PPC and PBAT/Starch) were tested for vine mulching in real field conditions. The impact of field ageing on their morphology, mechanical performance and ultimate biodegradation was investigated on films exposed at the soil surface or buried into the soil in order to assess the respective contribution of the main related ageing factors i.e. UV radiations and microorganisms. The fact that the soil-facing surface of films exhibited holes 18 months after installation suggested that the biodegradation process could occur above-soil even without previous burying step. However, the early loss of integrity of the biodegradable materials was attributed to UV radiations since beyond a certain threshold the photochemical modifications undergone by the material were too high to sustain its integrity. Whatever the material tested the deterioration of mechanical properties was correlated with the crosslinking of polymer chains inducing the formation of a gel fraction. Considering that the major part of the three materials studied is made of PBAT, the nature of the other polymer constituting the blend would not have a significant impact on the ageing mechanism of the material. Biodegradation analyses conducted in compost medium indicated that field ageing had a low impact on the percentages of mineralization whether the materials had been previously aged or not.

Journal of Polymers and the Environment, 2015

In this study, natural degradation and biodegradation of poly(3-hydroxybuyrate-co-3-hydroxyvalera... more In this study, natural degradation and biodegradation of poly(3-hydroxybuyrate-co-3-hydroxyvalerate) (PHBV) films were followed in different marine environments. First of all, ageing of PHBV films was investigated in natural seawater for 180 days and degradation was followed by means of weight loss measurements, scanning electron microscopy (SEM), differential scanning calorimetry and steric exclusion chromatography. In a second part, biodegradation tests were performed on PHBV powder, by following carbon dioxide (CO2) release(,) to highlight the PHBV bioassimilation of marine microorganisms. Three different marine environments were considered for biodegradation tests: a solid inoculum with foreshore sand, a solid-liquid inoculum with sand and seawater and a liquid inoculum with seawater. In the latter, a biofilm was added to study the influence of microorganisms on biodegradation kinetics. The films aged under natural conditions show a large loss of weight after 180 days in immersion, around 36 %, confirmed by SEM pictures which show an increase of the surface erosion and a decrease of the sample thickness. Microorganisms' attack occurred as suggested by CO2 release during biodegradation tests, whatever the environment studied.

Polymer Degradation and Stability, 2014

The aim of this study is to establish a baseline for poly(3-hydroxybutyrate-co-3-hydroxyvalerate)... more The aim of this study is to establish a baseline for poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) lifetime prediction in a marine environment, by means of mechanical and physico-chemical characterization of specimens immersed in continuously renewed and filtered natural seawater in the laboratory at different temperatures (4, 25 and 40°C). Samples were also aged at sea in Lorient harbour in order to compare laboratory and natural degradation mechanisms and kinetics. Due to its morphology, hydrolysis of PHBV in natural seawater is quite slow, and samples were observed to undergo preferentially an enzymatic surface degradation. Increasing the aging temperature in the laboratory promotes the water uptake and causes hydrolysis. As two degradation mechanisms occur in parallel, the choice of test conditions is critical, and the lifetime of PHBV in a marine environment is difficult to predict accurately.

HAL (Le Centre pour la Communication Scientifique Directe), 2020

Industrial Crops and Products, 2022

Polymer Degradation and Stability, 2019

Biodegradable plastics appear as one promising means to help solving the increasing issue of envi... more Biodegradable plastics appear as one promising means to help solving the increasing issue of environmental pollution by plastics. The present study aims at comparing the biodegradation mechanisms of two promising biodegradable plastics, PHBV Poly(3hydroxybutyrate-co-3-hydroxyvalerate) and PBSA Poly(butylene succinate-co-adipate) with the objective to provide a better understanding of the mechanisms involved and identify the most relevant indicators to follow biodegradation. For this purpose, the progress of the biodegradation process was monitored under controlled composting conditions at the laboratory scale at 58°C using several methodological approaches for evaluating polymer degradation. Indicators of the extent of material disappearance based on respirometry and

Marine pollution bulletin, 2018

Elutriation is an efficient process for extracting microplastics. The development of a numerical ... more Elutriation is an efficient process for extracting microplastics. The development of a numerical model has shown the need for optimizing aspects of the design of the actual elutriation protocol as well as the dimensioning of the column to increase its efficiency. The study aims to propose new dimensioning data and protocol elements for designing an efficient column. Using a numerical model, the filling velocity was calculated as a function of the size and the density of the particles to prevent sand suspension. The sieving protocol was adapted to increase the density limit for the extraction of plastic particles from 1460 to >1800 kg·m. The durations of the elutriation and the column height were calculated to improve the control of the particle suspension. These results contribute to the development of the next generation of elutriation system and will accelerate the study of plasticome in the context of sandy sediments.

Marine pollution bulletin, 2018

Ageing of various plastics in marine environment was monitored after immersion of two synthetic (... more Ageing of various plastics in marine environment was monitored after immersion of two synthetic (polyvinylchloride, PVC, and polyethylene terephthalate, PET) and one biodegradable (poly(butylene adipate co-terephtalate), PBAT) plastics for 502days in the bay of Lorient (Brittany, France). Data analysis indicates that aged PVC rapidly releases estrogenic compounds in seawater with a later adsorption of heavy metals; PET undergoes a low weakening of the surface whereas no estrogenic activity is detected; PBAT ages faster in marine environment than PVC. Aged PBAT exhibits heterogeneous surface with some cavities likely containing clay minerals from the chlorite group. Besides, this degraded material occasionally shows a high estrogenic activity. Overall, this study reports, for the first time, that some aged plastics, without being cytotoxic, can release estrogenic compounds in marine environment.

Marine Pollution Bulletin, 2017

The elutriation process has shown its efficiency to extract microplastics from sand and began to ... more The elutriation process has shown its efficiency to extract microplastics from sand and began to spread in the scientific community. This extraction technic requires knowing with accuracy the extraction velocities of particles. This study aims to test whether numerical modeling could help to calculate these velocities. From hydrodynamic equations, a numerical model has been developed and the outputs are compared to experimental extraction data. The results show, for the calculated velocities, the experimental plastic extraction yields will be higher than 90% for < 10% of sand contamination. The model also allows determining that, with the actual protocol, the maximum plastic density which can be extracted is about 1450 kg•m − 3 whereas the detrimental resuspension, which may occur during the column filling step, is highlighted. From model calculations, it arises that changes in the column dimensioning and the protocol operations need to be considered.

Marine pollution bulletin, Jan 15, 2017

Evaluating the microplastics pollution on the shores requires overcoming the technological and ec... more Evaluating the microplastics pollution on the shores requires overcoming the technological and economical challenge of efficient plastic extraction from sand. The recovery of dense microplastics requires the use of NaI solutions, a costly process. The aim of this study is to decrease this cost by recycling the NaI solutions and to determine the impact of NaI storage. For studying the NaI recyclability, the solution density and the salt mass have been monitored during ten life cycles. Density, pH and salt mass have been measured for 40days to assess the storage effect. The results show that NaI solutions are recyclable without any density alterations with a total loss of 35.9% after the 10cycles of use. During storage, chemical reactions may appear but are reversible. Consequently, the use of recycling methods allows for a significant cost reduction. How far the plastic extraction by dense solutions is representative is discussed.

Marine Pollution Bulletin, 2016

Although relatively easy to extract in the marine environment, microplastics are very difficult t... more Although relatively easy to extract in the marine environment, microplastics are very difficult to recover when they are trapped in sediments. The elutriation column is one of the best tools currently available for extracting plastics from sediment, but with a high sand recovery yield. This study aims to address the following questions: (i) is it possible to use a sedimentological approach to limit the sand recovery? (ii) does the extraction velocity of the sand and plastic particles vary according to density and granulometry? (iii) what is the relative recovery efficiency obtained for dense polymer particles mixed with marine sand? Based on a new granulometric classification, different plastic particle-size fractions are defined. Their extraction velocities are experimentally determined on particles of sediment and different plastics (PA, PVC). The particle recovery experiments indicate that it is possible to extract N 90% of dense plastic particles in cases of negligible sand recovery.

Chemosphere, Jan 16, 2015

In the aim of resolving environmental key issues such as irreversible soil pollution by non-biode... more In the aim of resolving environmental key issues such as irreversible soil pollution by non-biodegradable and non-recoverable polyethylene (PE) fragments, a full-scale field experiment was set up to evaluate the suitability of four biodegradable materials based on poly(butylene adipate-co-terephtalate) (PBAT) to be used as sustainable alternatives to PE for mulching application in vineyard. Initial ultimate tensile properties, functional properties during field ageing (water vapour permeability and radiometric properties), biodegradability and agronomical performance of the mulched vines (wood production and fruiting yield) were studied. In spite of their early loss of physical integrity that occurred only five months after vine planting, the four materials satisfied all the requested functional properties and led to agronomic performance as high as polyethylene. In the light of the obtained results, the mulching material lifespan was questioned in the case of long-term perennial cr...

Polymer Testing, 2014

Accelerated ageing was performed in distilled water at different temperatures (25, 30, 40 and 50°... more Accelerated ageing was performed in distilled water at different temperatures (25, 30, 40 and 50°C) on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), which is a biodegradable biopolymer, in order to estimate its lifetime in aqueous environment. In a first part, degradation mechanisms were followed by gravimetry, tensile tests and steric exclusion chromatography. Both immersion and relative humidity have been examined. In a second part, the strain at break was used as an indicator for lifetime prediction with an Arrhenius extrapolation. The study revealed the presence of only one irreversible degradation mechanism, i.e. hydrolytic degradation, which is temperature dependant. So, within the approach assumptions, the lifetime in distilled water of PHBV following Arrhenius behaviour can be predicted.

Chemical Engineering Journal, 2015

h i g h l i g h t s Compostable properties of antimicrobial cross-linked protein films were evalu... more h i g h l i g h t s Compostable properties of antimicrobial cross-linked protein films were evaluated. Cross-linked gliadin films completely disintegrated in 4 days in compost. Biodegradation of films was complete but affected by cross-linking degree. No ecotoxic effects were observed in tomato seeds using the resulting compost.

Polymer Degradation and Stability, 2014

Pollution of nature by plastics is a major environmental problem and the challenge for the future... more Pollution of nature by plastics is a major environmental problem and the challenge for the future is to manage the lifetime of polymers better. The aim of this study is to establish a baseline on degradation mechanism and degradation kinetics for lifetime prediction of polylactide (PLA) in a marine environment. The ageing of PLA was accelerated by raising temperature in distilled water, filtered and renewed seawater and natural seawater. Samples were immersed in distilled water for six months at different temperatures (25, 30, 40 and 50°C) in order to evaluate the influence of temperature on PLA degradation kinetics and to predict lifetime. Then, samples were immersed in seawater both in the laboratory and at sea, in order to compare the effects of environment, marine organisms and salt, on degradation. The different degradation steps were followed by gravimetry, tensile tests, scanning electron microscopy (SEM), steric exclusion chromatography (SEC) and differential scanning calorimetry (DSC). In distilled water, accelerated ageing of PLA is complex with deviation from Fickian behaviour at higher temperature. Moreover, immersion in distilled water induces morphological changes, in particular holes, which are absent in seawater at 40°C for the same immersion time. Indeed, seawater has little impact on the diffusion kinetics but affects M ∞ values, which are slightly lower compare to the distilled water uptake.

Polymer Degradation and Stability, 2011

The objective of this work was to investigate the influence of clay nanoparticles on the biodegra... more The objective of this work was to investigate the influence of clay nanoparticles on the biodegradability of wheat gluten-based materials through a better understanding of multi-scale relationships between biodegradability, water transfer properties and structure of wheat gluten/clay materials. Wheat gluten/clay (nano)composites materials were prepared via bi-vis extrusion by using an unmodified sodium montmorillonite (MMT) and an organically modified MMT. Respirometric

Journal of Polymers and the Environment, 2013

The present work mainly dedicated to fungal degradation of poly(butylene adipate-co-terephthalate... more The present work mainly dedicated to fungal degradation of poly(butylene adipate-co-terephthalate) [PBAT], to enclose the role of fungi in a real process of biodegradation, the degree of degradation, and to understand the kinetics of PBAT biodegradation. Respirometer tests were realized in soil at 30°C, and in compost at 30 and 58°C. Results have shown that temperature is one of the essential parameters governing the fungal degradation of PBAT. Moreover, the final rates of PBAT biodegradation in an inoculated compost with fungi and in a real compost were found comparable, which means that the selected fungi were efficient as much as a mixture of bacteria and fungi. The curves of PBAT biodegradation were modeled by Hill sigmoid. Fungal degradation was completed by investigating the physical and the chemical properties of the polymer during the process of degradation using several analytical methods such as matrix assisted laser desorption ionization-time of fly spectroscopy, size exclusion chromatography, and differential scanning calorimetry. These experiments led to a better understanding of the various stages of fungal degradation of PBAT: hydrolysis as well as mineralization. Furthermore, the analysis of metabolizing products was investigated also.

Journal of Polymers and the Environment, 2005

For many years now, scientific articles have been published on the potential biodegradability of ... more For many years now, scientific articles have been published on the potential biodegradability of polyethylene. Polyethylene (PE) with peroxidant additives, in the form of agricultural films, is sold by various suppliers as biodegradable mulch. Even though, the photo-chemical and thermal degradation of these products under artificial laboratory conditions is highlighted, several extrapolation on the biodegradation and, moreover, on the neutral environmental impact of PE are made. In this study, three different commercial mulch films have been submitted to standardised biodegradation tests and the results are discussed. The first conclusions are that a very low degree of biodegradation of the commercial PE films is achieved from these tests and that crosslinked PE micro-fragments are found in soil after a very long period of time.

Journal of Polymers and the Environment, 2011

The biodegradability of polymers by microorganisms is generally studied in a real environment tha... more The biodegradability of polymers by microorganisms is generally studied in a real environment that contains a natural mixture of fungi and bacteria. The present research mainly focused on the purely fungal degradation of poly(l-lactide), PLLA, to enclose the part of fungi in a real process of biodegradation and to understand the kinetics of biodegradation. Respirometric tests were realized in soil at 30 °C, and in compost at 30 and 58 °C. Results indicated that temperature is the predominant parameter governing the fungal degradation of PLLA. Moreover, in real compost, the biodegradation kinetics of the PLLA revealed a synergy between bacteria and fungi. The curves of PLLA and cellulose biodegradation were modeled by Hill sigmoïd. Fungal degradation was completed by investigating the physical and the chemical properties of the polymer during the process of degradation using several analytical methods such as matrix assisted laser desorption ionization-time of fly spectroscopy, infrared spectroscopy, size exclusion chromatography, and differential scanning calorimetry. These experiments led to a better understanding of the various stages of fungal degradation of PLLA: hydrolysis as well as mineralization. Furthermore, metabolizing products (by-products) of PLLA was investigated also.

Chimie verte, 2018

Certains materiaux ont la possibilite de subir une decomposition naturelle rapide en etant « cons... more Certains materiaux ont la possibilite de subir une decomposition naturelle rapide en etant « consommes » par des bacteries, des champignons, des algues, des insectes, etc. C'est donc une alternative au mode de valorisation par recyclage (et donc de recuperation d'energie). Cet article se propose tout d’abord d’expliciter les etapes de la biodegradation en detaillant les principales reactions, les facteurs impliques ainsi que les methodes de mesure utilisees ; sont ensuite presentes les differents materiaux biodegradables issus de polymeres naturels ou artificiels, et les principales applications industrielles des polymeres biodegradables.

Journal of Polymers and the Environment, 2017

Three black biodegradable films based on PBAT-blends (PBAT/PLA, PBAT/PPC and PBAT/Starch) were te... more Three black biodegradable films based on PBAT-blends (PBAT/PLA, PBAT/PPC and PBAT/Starch) were tested for vine mulching in real field conditions. The impact of field ageing on their morphology, mechanical performance and ultimate biodegradation was investigated on films exposed at the soil surface or buried into the soil in order to assess the respective contribution of the main related ageing factors i.e. UV radiations and microorganisms. The fact that the soil-facing surface of films exhibited holes 18 months after installation suggested that the biodegradation process could occur above-soil even without previous burying step. However, the early loss of integrity of the biodegradable materials was attributed to UV radiations since beyond a certain threshold the photochemical modifications undergone by the material were too high to sustain its integrity. Whatever the material tested the deterioration of mechanical properties was correlated with the crosslinking of polymer chains inducing the formation of a gel fraction. Considering that the major part of the three materials studied is made of PBAT, the nature of the other polymer constituting the blend would not have a significant impact on the ageing mechanism of the material. Biodegradation analyses conducted in compost medium indicated that field ageing had a low impact on the percentages of mineralization whether the materials had been previously aged or not.

Journal of Polymers and the Environment, 2015

In this study, natural degradation and biodegradation of poly(3-hydroxybuyrate-co-3-hydroxyvalera... more In this study, natural degradation and biodegradation of poly(3-hydroxybuyrate-co-3-hydroxyvalerate) (PHBV) films were followed in different marine environments. First of all, ageing of PHBV films was investigated in natural seawater for 180 days and degradation was followed by means of weight loss measurements, scanning electron microscopy (SEM), differential scanning calorimetry and steric exclusion chromatography. In a second part, biodegradation tests were performed on PHBV powder, by following carbon dioxide (CO2) release(,) to highlight the PHBV bioassimilation of marine microorganisms. Three different marine environments were considered for biodegradation tests: a solid inoculum with foreshore sand, a solid-liquid inoculum with sand and seawater and a liquid inoculum with seawater. In the latter, a biofilm was added to study the influence of microorganisms on biodegradation kinetics. The films aged under natural conditions show a large loss of weight after 180 days in immersion, around 36 %, confirmed by SEM pictures which show an increase of the surface erosion and a decrease of the sample thickness. Microorganisms' attack occurred as suggested by CO2 release during biodegradation tests, whatever the environment studied.

Polymer Degradation and Stability, 2014

The aim of this study is to establish a baseline for poly(3-hydroxybutyrate-co-3-hydroxyvalerate)... more The aim of this study is to establish a baseline for poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) lifetime prediction in a marine environment, by means of mechanical and physico-chemical characterization of specimens immersed in continuously renewed and filtered natural seawater in the laboratory at different temperatures (4, 25 and 40°C). Samples were also aged at sea in Lorient harbour in order to compare laboratory and natural degradation mechanisms and kinetics. Due to its morphology, hydrolysis of PHBV in natural seawater is quite slow, and samples were observed to undergo preferentially an enzymatic surface degradation. Increasing the aging temperature in the laboratory promotes the water uptake and causes hydrolysis. As two degradation mechanisms occur in parallel, the choice of test conditions is critical, and the lifetime of PHBV in a marine environment is difficult to predict accurately.

HAL (Le Centre pour la Communication Scientifique Directe), 2020

Industrial Crops and Products, 2022

Polymer Degradation and Stability, 2019

Biodegradable plastics appear as one promising means to help solving the increasing issue of envi... more Biodegradable plastics appear as one promising means to help solving the increasing issue of environmental pollution by plastics. The present study aims at comparing the biodegradation mechanisms of two promising biodegradable plastics, PHBV Poly(3hydroxybutyrate-co-3-hydroxyvalerate) and PBSA Poly(butylene succinate-co-adipate) with the objective to provide a better understanding of the mechanisms involved and identify the most relevant indicators to follow biodegradation. For this purpose, the progress of the biodegradation process was monitored under controlled composting conditions at the laboratory scale at 58°C using several methodological approaches for evaluating polymer degradation. Indicators of the extent of material disappearance based on respirometry and

Marine pollution bulletin, 2018

Elutriation is an efficient process for extracting microplastics. The development of a numerical ... more Elutriation is an efficient process for extracting microplastics. The development of a numerical model has shown the need for optimizing aspects of the design of the actual elutriation protocol as well as the dimensioning of the column to increase its efficiency. The study aims to propose new dimensioning data and protocol elements for designing an efficient column. Using a numerical model, the filling velocity was calculated as a function of the size and the density of the particles to prevent sand suspension. The sieving protocol was adapted to increase the density limit for the extraction of plastic particles from 1460 to >1800 kg·m. The durations of the elutriation and the column height were calculated to improve the control of the particle suspension. These results contribute to the development of the next generation of elutriation system and will accelerate the study of plasticome in the context of sandy sediments.

Marine pollution bulletin, 2018

Ageing of various plastics in marine environment was monitored after immersion of two synthetic (... more Ageing of various plastics in marine environment was monitored after immersion of two synthetic (polyvinylchloride, PVC, and polyethylene terephthalate, PET) and one biodegradable (poly(butylene adipate co-terephtalate), PBAT) plastics for 502days in the bay of Lorient (Brittany, France). Data analysis indicates that aged PVC rapidly releases estrogenic compounds in seawater with a later adsorption of heavy metals; PET undergoes a low weakening of the surface whereas no estrogenic activity is detected; PBAT ages faster in marine environment than PVC. Aged PBAT exhibits heterogeneous surface with some cavities likely containing clay minerals from the chlorite group. Besides, this degraded material occasionally shows a high estrogenic activity. Overall, this study reports, for the first time, that some aged plastics, without being cytotoxic, can release estrogenic compounds in marine environment.

Marine Pollution Bulletin, 2017

The elutriation process has shown its efficiency to extract microplastics from sand and began to ... more The elutriation process has shown its efficiency to extract microplastics from sand and began to spread in the scientific community. This extraction technic requires knowing with accuracy the extraction velocities of particles. This study aims to test whether numerical modeling could help to calculate these velocities. From hydrodynamic equations, a numerical model has been developed and the outputs are compared to experimental extraction data. The results show, for the calculated velocities, the experimental plastic extraction yields will be higher than 90% for < 10% of sand contamination. The model also allows determining that, with the actual protocol, the maximum plastic density which can be extracted is about 1450 kg•m − 3 whereas the detrimental resuspension, which may occur during the column filling step, is highlighted. From model calculations, it arises that changes in the column dimensioning and the protocol operations need to be considered.

Marine pollution bulletin, Jan 15, 2017

Evaluating the microplastics pollution on the shores requires overcoming the technological and ec... more Evaluating the microplastics pollution on the shores requires overcoming the technological and economical challenge of efficient plastic extraction from sand. The recovery of dense microplastics requires the use of NaI solutions, a costly process. The aim of this study is to decrease this cost by recycling the NaI solutions and to determine the impact of NaI storage. For studying the NaI recyclability, the solution density and the salt mass have been monitored during ten life cycles. Density, pH and salt mass have been measured for 40days to assess the storage effect. The results show that NaI solutions are recyclable without any density alterations with a total loss of 35.9% after the 10cycles of use. During storage, chemical reactions may appear but are reversible. Consequently, the use of recycling methods allows for a significant cost reduction. How far the plastic extraction by dense solutions is representative is discussed.

Marine Pollution Bulletin, 2016

Although relatively easy to extract in the marine environment, microplastics are very difficult t... more Although relatively easy to extract in the marine environment, microplastics are very difficult to recover when they are trapped in sediments. The elutriation column is one of the best tools currently available for extracting plastics from sediment, but with a high sand recovery yield. This study aims to address the following questions: (i) is it possible to use a sedimentological approach to limit the sand recovery? (ii) does the extraction velocity of the sand and plastic particles vary according to density and granulometry? (iii) what is the relative recovery efficiency obtained for dense polymer particles mixed with marine sand? Based on a new granulometric classification, different plastic particle-size fractions are defined. Their extraction velocities are experimentally determined on particles of sediment and different plastics (PA, PVC). The particle recovery experiments indicate that it is possible to extract N 90% of dense plastic particles in cases of negligible sand recovery.

Chemosphere, Jan 16, 2015

In the aim of resolving environmental key issues such as irreversible soil pollution by non-biode... more In the aim of resolving environmental key issues such as irreversible soil pollution by non-biodegradable and non-recoverable polyethylene (PE) fragments, a full-scale field experiment was set up to evaluate the suitability of four biodegradable materials based on poly(butylene adipate-co-terephtalate) (PBAT) to be used as sustainable alternatives to PE for mulching application in vineyard. Initial ultimate tensile properties, functional properties during field ageing (water vapour permeability and radiometric properties), biodegradability and agronomical performance of the mulched vines (wood production and fruiting yield) were studied. In spite of their early loss of physical integrity that occurred only five months after vine planting, the four materials satisfied all the requested functional properties and led to agronomic performance as high as polyethylene. In the light of the obtained results, the mulching material lifespan was questioned in the case of long-term perennial cr...

Polymer Testing, 2014

Accelerated ageing was performed in distilled water at different temperatures (25, 30, 40 and 50°... more Accelerated ageing was performed in distilled water at different temperatures (25, 30, 40 and 50°C) on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), which is a biodegradable biopolymer, in order to estimate its lifetime in aqueous environment. In a first part, degradation mechanisms were followed by gravimetry, tensile tests and steric exclusion chromatography. Both immersion and relative humidity have been examined. In a second part, the strain at break was used as an indicator for lifetime prediction with an Arrhenius extrapolation. The study revealed the presence of only one irreversible degradation mechanism, i.e. hydrolytic degradation, which is temperature dependant. So, within the approach assumptions, the lifetime in distilled water of PHBV following Arrhenius behaviour can be predicted.

Chemical Engineering Journal, 2015

h i g h l i g h t s Compostable properties of antimicrobial cross-linked protein films were evalu... more h i g h l i g h t s Compostable properties of antimicrobial cross-linked protein films were evaluated. Cross-linked gliadin films completely disintegrated in 4 days in compost. Biodegradation of films was complete but affected by cross-linking degree. No ecotoxic effects were observed in tomato seeds using the resulting compost.

Polymer Degradation and Stability, 2014

Pollution of nature by plastics is a major environmental problem and the challenge for the future... more Pollution of nature by plastics is a major environmental problem and the challenge for the future is to manage the lifetime of polymers better. The aim of this study is to establish a baseline on degradation mechanism and degradation kinetics for lifetime prediction of polylactide (PLA) in a marine environment. The ageing of PLA was accelerated by raising temperature in distilled water, filtered and renewed seawater and natural seawater. Samples were immersed in distilled water for six months at different temperatures (25, 30, 40 and 50°C) in order to evaluate the influence of temperature on PLA degradation kinetics and to predict lifetime. Then, samples were immersed in seawater both in the laboratory and at sea, in order to compare the effects of environment, marine organisms and salt, on degradation. The different degradation steps were followed by gravimetry, tensile tests, scanning electron microscopy (SEM), steric exclusion chromatography (SEC) and differential scanning calorimetry (DSC). In distilled water, accelerated ageing of PLA is complex with deviation from Fickian behaviour at higher temperature. Moreover, immersion in distilled water induces morphological changes, in particular holes, which are absent in seawater at 40°C for the same immersion time. Indeed, seawater has little impact on the diffusion kinetics but affects M ∞ values, which are slightly lower compare to the distilled water uptake.

Polymer Degradation and Stability, 2011

The objective of this work was to investigate the influence of clay nanoparticles on the biodegra... more The objective of this work was to investigate the influence of clay nanoparticles on the biodegradability of wheat gluten-based materials through a better understanding of multi-scale relationships between biodegradability, water transfer properties and structure of wheat gluten/clay materials. Wheat gluten/clay (nano)composites materials were prepared via bi-vis extrusion by using an unmodified sodium montmorillonite (MMT) and an organically modified MMT. Respirometric

Journal of Polymers and the Environment, 2013

The present work mainly dedicated to fungal degradation of poly(butylene adipate-co-terephthalate... more The present work mainly dedicated to fungal degradation of poly(butylene adipate-co-terephthalate) [PBAT], to enclose the role of fungi in a real process of biodegradation, the degree of degradation, and to understand the kinetics of PBAT biodegradation. Respirometer tests were realized in soil at 30°C, and in compost at 30 and 58°C. Results have shown that temperature is one of the essential parameters governing the fungal degradation of PBAT. Moreover, the final rates of PBAT biodegradation in an inoculated compost with fungi and in a real compost were found comparable, which means that the selected fungi were efficient as much as a mixture of bacteria and fungi. The curves of PBAT biodegradation were modeled by Hill sigmoid. Fungal degradation was completed by investigating the physical and the chemical properties of the polymer during the process of degradation using several analytical methods such as matrix assisted laser desorption ionization-time of fly spectroscopy, size exclusion chromatography, and differential scanning calorimetry. These experiments led to a better understanding of the various stages of fungal degradation of PBAT: hydrolysis as well as mineralization. Furthermore, the analysis of metabolizing products was investigated also.

Journal of Polymers and the Environment, 2005

For many years now, scientific articles have been published on the potential biodegradability of ... more For many years now, scientific articles have been published on the potential biodegradability of polyethylene. Polyethylene (PE) with peroxidant additives, in the form of agricultural films, is sold by various suppliers as biodegradable mulch. Even though, the photo-chemical and thermal degradation of these products under artificial laboratory conditions is highlighted, several extrapolation on the biodegradation and, moreover, on the neutral environmental impact of PE are made. In this study, three different commercial mulch films have been submitted to standardised biodegradation tests and the results are discussed. The first conclusions are that a very low degree of biodegradation of the commercial PE films is achieved from these tests and that crosslinked PE micro-fragments are found in soil after a very long period of time.

Journal of Polymers and the Environment, 2011

The biodegradability of polymers by microorganisms is generally studied in a real environment tha... more The biodegradability of polymers by microorganisms is generally studied in a real environment that contains a natural mixture of fungi and bacteria. The present research mainly focused on the purely fungal degradation of poly(l-lactide), PLLA, to enclose the part of fungi in a real process of biodegradation and to understand the kinetics of biodegradation. Respirometric tests were realized in soil at 30 °C, and in compost at 30 and 58 °C. Results indicated that temperature is the predominant parameter governing the fungal degradation of PLLA. Moreover, in real compost, the biodegradation kinetics of the PLLA revealed a synergy between bacteria and fungi. The curves of PLLA and cellulose biodegradation were modeled by Hill sigmoïd. Fungal degradation was completed by investigating the physical and the chemical properties of the polymer during the process of degradation using several analytical methods such as matrix assisted laser desorption ionization-time of fly spectroscopy, infrared spectroscopy, size exclusion chromatography, and differential scanning calorimetry. These experiments led to a better understanding of the various stages of fungal degradation of PLLA: hydrolysis as well as mineralization. Furthermore, metabolizing products (by-products) of PLLA was investigated also.