BglBrick vectors and datasheets: A synthetic biology platform for gene expression (original) (raw)

Abstract

Background

As engineered biological systems become more complex, it is increasingly common to express multiple operons from different plasmids and inducible expression systems within a single host cell. Optimizing such systems often requires screening combinations of origins of replication, expression systems, and antibiotic markers. This procedure is hampered by a lack of quantitative data on how these components behave when more than one origin of replication or expression system are used simultaneously. Additionally, this process can be time consuming as it often requires the creation of new vectors or cloning into existing but disparate vectors.

Results

Here, we report the development and characterization of a library of expression vectors compatible with the BglBrick standard (BBF RFC 21). We have designed and constructed 96 BglBrick-compatible plasmids with a combination of replication origins, antibiotic resistance genes, and inducible promoters. These plasmids were characterized over a range of inducer concentrations, in the presence of non-cognate inducer molecules, and with several growth media, and their characteristics were documented in a standard format datasheet. A three plasmid system was used to investigate the impact of multiple origins of replication on plasmid copy number.

Conclusions

The standardized collection of vectors presented here allows the user to rapidly construct and test the expression of genes with various combinations of promoter strength, inducible expression system, copy number, and antibiotic resistance. The quantitative datasheets created for these vectors will increase the predictability of gene expression, especially when multiple plasmids and inducers are utilized.

Similar content being viewed by others

Background

Metabolic engineering, the redirection of metabolic pathways using genetic manipulation, plays an important role in a wide range of biological research including drug production, bioremediation, and biofuel production [15]. Metabolic pathways that lead to important drugs or chemicals are often multi-step processes involving many enzymes. In addition, controlling and coordinating the activity of each enzyme to achieve the optimal production of the target product is extremely complicated [69]. To construct an entire metabolic pathway in a heterologous host, the genes encoding the pathway enzymes often have to be constructed on multiple plasmids. Furthermore, the expression of each enzyme needs to be tuned to balance it with that of the other enzymes in the pathway and to reduce the metabolic burden on the host cell [6, 911]. Recently, several advanced cloning methods using homologous recombination, such as Sequence and Ligation-Independent Cloning (SLIC), Gibson DNA assembly, and 'DNA assembler', have been reported and applied to construct large plasmids or chromosomes that encode metabolic pathways [1214]. However, these methods require non-standardized homologous complementary sequences for each gene part and are limited in terms of automation and the number of DNA fragments to be assembled to build a combinatorial library for pathway optimization.

Synthetic biology is an emerging field with large potential in engineering biological systems and has been a powerful tool for metabolic engineering [2, 1517]. Synthetic biology focuses on the design and construction of biological parts that can be understood, designed, and tuned to meet specific performance criteria. These parts are then assembled into larger integrated systems to solve specific problems [15, 18].

The standardization of biological parts and their assembly is one of the core ideas behind synthetic biology. To achieve this with parts (e.g., ribosome binding sites, promoters, DNA binding proteins, etc.) researchers at MIT established the BioBricks™ standard (so called BBF RFC 10) [[19](/article/10.1186/1754-1611-5-12#ref-CR19 "Knight TFJ: Idempotent Vector Design for Standard Assembly of Biobricks. DSpace@MIT 2003. [ http://hdl.handle.net/1721.1/21168

            ]")\]. BglBrick standard (so called BBF RFC 21) is a recently proposed standard that uses 4 unique restriction enzyme sites (_EcoRI, BglII_, and _BamHI, XhoI_) different from BioBricks™ standard \[[20](/article/10.1186/1754-1611-5-12#ref-CR20 "Anderson JC, Dueber JE, Leguia M, Wu GC, Goler JA, Arkin AP, Keasling JD: BglBricks: A flexible standard for biological part assembly. Journal of Biological Engineering 2010,4(1):1-12. 10.1186/1754-1611-4-1")\] (Figure [1](/article/10.1186/1754-1611-5-12#Fig1)). The standardized assembly approach such as BioBricks or BglBricks does not require PCR amplification step and consequently, the post-assembly sequence verification step is optional. It is especially useful when constructing metabolic pathways that are encoded by many genes and need to be assembled in various combinations to search for improved phenotypes.

Figure 1

figure 1

Schematic diagram of the BglBrick part assembly. Four unique restriction sites (EcoRI, BglII, BamHI, and XhoI) are used for the BglBrick standard assembly. KAN is the kanamycin resistance marker.

Full size image

The construction of vectors using BioBricks™ standard biological parts has been reported recently [21]. These vectors were constructed by various combinations of BioBricks™ compatible parts and BioBrick™ base vector (BBa_I51020) using BioBricks™ gene assembly protocol. In metabolic engineering research, several sets of such vectors--with different combinations of replication origin, promoter, and antibiotic resistance markers--would be a very useful tool to test and optimize the production of specific target molecules. In this report, we describe a large set of vectors that are compatible with BglBrick parts. These vectors contain commonly used replication origins, inducible gene expression systems, and antibiotic resistance markers. After constructing these expression vectors, we tested and quantified their ability to express fluorescent proteins that were spliced into them. The resulting information is presented in datasheets that will allow engineers to design metabolic pathways with greater control.

Results

Construction of BglBrick vectors

Construction of intermediate BglBrick vectors

To construct a set of vectors compatible with BglBrick sites, we have chosen four different replication origins belonging to different incompatibility groups and having different copy numbers. The ColE1 replication origin has been used to make a relatively high copy version of the vector, the p15A origin for a medium copy version, the SC101 origin for a low copy version, and the pBBR1, a broad host range origin, for a second medium copy version. (Figure 2) We have introduced a few point mutations into the Rep gene of pBBR1 origin to engineer a copy number about 6-fold higher than the non-mutated origin as previously reported [22].

Figure 2

figure 2

Plasmid design and nomenclature of BglBrick plasmids (pBb). (A) Plasmid design of pBb vectors. The plasmid is composed of three modules: antibiotic resistance gene module, replication origin module, and expression module, which includes the repressor, promoter, gene of interest (rfp or gfp), and terminator. BglBrick sites are in red boxes. (B) Nomenclature of the pBb vector system. The identity of the vector is described by three letters containing the information of replication origin, promoter, and antibiotic resistance marker as indicated. The prefix pBb is used for BglBrick plasmids and the protein gene name in the plasmid is included at the end of the vector description.

Full size image

Since some of the vector components have BglBrick restriction sites (EcoRI, BglII, BamHI, XhoI) in their original sequence, we had to mutate them to remove these sites. Site-directed mutagenesis was used to make a single nucleotide substitution to eliminate the restriction sites from these components in the intermediate plasmids, and when the mutation site occurred within an open reading frame, E. coli codon usage was taken into consideration.

Construction of expression module

The promoter system modules consisted of one of 8 different promoters and corresponding repressors. We have chosen the promoters that have been frequently used for protein production and metabolic pathway engineering. For IPTG-inducible promoters, the Trc and T7 promoters were chosen as strong promoters and PlacUV5 as medium strength promoter [23]. Each construct carried lacI q to repress expression from these promoters. PLlacO-1 was also added to the IPTG-inducible promoter list because of its tight regulation with medium- to high-level expression. Several promoters induced by chemicals other than IPTG were included in the promoter list: tetracycline-regulated gene expression system (Ptet and tetR) [24], the recently developed propionate-regulated gene expression system (PprpB and prpR) [25, 26], and the arabinose-inducible promoter system (PBAD and araC) [27]. The list of promoters is described in Figure 2(B).

Construction of promoter-_rfp_-terminator module and final pBb vector assembly

The modules with promoter system and _rfp_-terminator were constructed by SOE-PCR. Each vector contains a 5'-UTR and rfp between the BglII and BamHI sites. This operon was used to characterize expression from the vectors and can be used to screen against background vector when cloning other operons into these vectors. We have designed a systematic naming rule for these BglBrick vectors that describes types of replication origin, promoter, antibiotic resistance, and the gene included as a BglBrick part. This naming scheme is described in Figure 2(B).

Data sheet experiments

Performing a quantitative characterization of a biological parts and then summarizing the properties of the parts on datasheets has been previously described [18]. A similar type of datasheet should be useful when the BglBrick vectors are used to produce a single target protein or all of the enzymes in an entire metabolic pathway. A summary of gene expression and cell growth behavior of a specific plasmid in a specific host strain can be a valuable resource for determining which origin-promoter-resistance combination would be most useful for a particular metabolic engineering project.

We prepared 32 datasheets for the vectors that have different replication origins and promoters. The PDF files of datasheets are currently available from the JBEI Public Registry (https://public-registry.jbei.org) and also as Additional file 1 (an example of the datasheet is shown in Figure 3). We used only ampicillin-resistant BglBrick vectors for the datasheet experiments based on the assumption that antibiotic resistance does not significantly affect the expression property and copy number of BglBrick vectors [28]. In the datasheet, we included a plasmid map and the experimentally-determined copy number, expression, and growth properties of E. coli strains harboring a specific BglBrick plasmid under various conditions (several inducer concentrations, different types of culture medium, high glucose concentration for catabolite repression, and the presence of other inducers that might alter expression from the target promoter)[29].

Figure 3

figure 3

Datasheet for the pBbE5 vector. The datasheet includes a general description of BglBrick vector and a summary of its expression properties.

Full size image

Data sheet experiment: inducer dose response

The level of protein production usually depends on inducer concentration, and this expression profile is important information when using the BglBrick vectors for metabolic engineering, which frequently requires tight control of the metabolic pathway. RFP expression (or GFP expression for pBbB vectors) at different inducer doses was tested in E. coli BLR(DE3) grown in LB medium with ampicillin. pBbE5a-RFP in LB-ampicillin medium induced with 100 μM IPTG was used as a control for all the measurements (pBbE5a-GFP was used as a control for pBbB vectors). The concentration range for each inducer was determined based on simple scanning over a wide range of inducer concentrations with the high copy (ColE1 origin) BglBrick plasmid. For IPTG-inducible systems, the production of fluorescent protein was monitored at up to 500 μM IPTG, and for plasmids with the Tet-inducible promoter, propionate-inducible promoter, and arabinose-inducible promoter, the production of fluorescent protein was monitored at up to 200 nM of aTc, 100 mM of propionate, and 20 mM of arabinose, respectively. A plot containing average and specific fluorescence (fluorescence from RFP or GFP/OD600) as a function of time was created for each inducer concentration, and the data were also presented as a bar graph at different inducer concentration at a single time point (18 hrs after induction) (Figure 3). Most BglBrick plasmids showed clear dose-dependent expression (Figure 3 and Additional file 1 for more datasheets).

Data sheet experiments: strain and medium dependence

Strain and medium dependence of BglBrick plasmids are important properties to consider when selecting the vectors and the medium for metabolic pathway expression, and they were examined in two frequently used E. coli strains (BLR(DE3) and DH1). Three different growth media (minimal medium (M9) and rich media (LB and TB)) were used to test fluorescence protein production from these two strains. Most BglBrick vectors, except those with propionate inducible promoters, showed almost no strain dependence with the strongest expression in TB medium and the weakest expression in minimal medium in general, as expected. Plasmids containing the T7 promoter were not tested in DH1 since DH1 lacks T7 RNA polymerase.

The propionate-inducible promoters showed unusual behavior in different strains and in different media. For example, pBb{A, E, or S}3a-rfp (or pBbB3a-gfp) plasmids in BLR(DE3) showed normal expression behavior in LB medium but almost no expression in TB medium. Recently, it has been found that in addition to the native inducer, propionate, this promoter system is also regulated by carbon catabolite repression (CCR) mediated by several sugars like glucose, arabinose, mannose, xylose, galactose and glycerol [24]. This CCR mediated regulation could be the reason for the lack of expression from these plasmids in BLR(DE3) in TB medium as the medium contains 0.2% glycerol. Interestingly, when the same vectors were tested in DH1, fluorescent protein was produced both in LB and TB media. However, expression was very leaky in these media; protein was produced regardless of the concentration of propionate. These results indicate that the propionate inducible expression systems are host-dependent.

Data sheet experiments: catabolite repression and inducer crosstalk

Carbon catabolite repression (CCR) in E. coli is a regulatory mechanism to ensure sequential utilization of carbohydrates [30]. In metabolic engineering, glucose is frequently supplemented at high concentration in the medium as the primary or only carbon source, and it is important to know whether the transcriptional machinery of the pathway works normally in the presence of high concentrations of glucose. The effect of glucose for each BglBrick plasmid (in BLR(DE3)) was tested in the three different media containing 1% glucose. As control experiments, the media without additional glucose were also used for the expression of fluorescent protein with or without inducer. All the vectors with a version of the lac promoter were repressed by the addition of 1% glucose. Leaky expression from these plasmids in TB medium decreased dramatically in presence of additional glucose. Vectors with the tetracyclin-inducible promoter were less susceptible to catabolite repression, showing only about 20% less protein production when expressed in LB with 1% glucose compared to the production in LB without additional glucose. Vectors with the arabinose-inducible promoter were also repressed by glucose, and more repression was observed in LB with 1% glucose than in the other media tested. Vectors with propionate-inducible promoters (promoter numbers 3 and 4) were very strongly repressed by the presence of 1% glucose in both LB and TB media. But interestingly, they showed less repression in minimal medium when 1% glucose was added.

To optimize or balance the expression of proteins in a metabolic pathway, the pathway genes are frequently placed under control of different promoters, each of which may use a unique inducer to regulate transcription. Unfortunately, there can be substantial crosstalk among some inducible systems that makes independent regulation difficult [29]. The potential crosstalk between various inducible promoters in BglBrick plasmids was tested at the inducer concentrations that achieved the highest protein expression in LB medium with BLR(DE3). Some IPTG-inducible systems (Ptrc and PlacUV5) did not show any crosstalk in the presence of 20 mM arabinose, but PLlacO1 and PT7 showed about 15-20% decrease in fluorescent protein production when 20 mM arabinose was added to the medium. Also, Ptrc and PT7 did not show any crosstalk toward aTc and propionate, but PlacUV5 and PLlacO1 showed about 30-40% increase in protein production in the presence of 400 nM aTc or 20 mM propionate. Ptet performance decreased about 10-15% when 20 mM arabinose or 20 mM propionate was added, but was not affected by the presence of 100 μM IPTG. The propionate-inducible expression system did not function well in the presence of 20 mM arabinose: expression from Ppro in the presence of arabinose was 20-30% of that in the absence of arabinose. BglBrick plasmids with PBAD showed the most independent behavior in the presence of other inducers.

The mechanism by which arabinose represses the non-PBAD promoters is not clear, but one potential explanation could be the decreased level of cAMP-CRP in the presence of arabinose. As endogenous arabinose promoters are turned on by the addition of arabinose, the cAMP-CRP concentration may decrease since the cAMP-CRP also binds to the araB promoter and the cell does not have enough cAMP-CRP to bind to the lac promoter or propionate-inducible promoter. This still cannot explain the repression of Ptet by high level of arabinose, and more studies on the crosstalk of these promoters and inducers needs to be conducted.

Data sheet experiment: Plasmid copy number determination

Real-time quantitative PCR was used to determine the copy numbers of plasmids [22, 3135] with the available origins of replication in our system. Copy numbers were determined for plasmids transformed into both E. coli BLR and DH1. The single copy nptII gene harbored on the plasmid was used as the target to measure plasmid copy number, with the multi-copy 16S rDNA gene harbored on host chromosome [36] having been used for normalization purposes [22, 34, 35]. Here, plasmid copy is defined as the number of copies of plasmid present per chromosomal equivalent in _E. coli_[37], and absolute plasmid copy numbers were obtained by using BLR and DH1 transgenic strains containing a single nptII (integrated into the intA site on the chromosome of DH1 and into the tyrR site on the chromosome of BLR) as the reference sample. The plasmid copy numbers obtained for strains with a single plasmid of a particular replication origin are comparable to those found in the literature (Figure 4(A)) [38, 39]. While the pSC101** origin is a derivative of pMPP6 [40], we have found comparable copy numbers for plasmids with wild-type pSC101, pMPP6, or pSC101** origins of replication (data not shown). It is also worth noting that similar copy numbers were obtained for a given plasmid transformed into either E. coli BLR or DH1 (Figure 4(A)), suggesting that these two strains do not differentially impact the regulation of plasmid copy number for the replication origins employed here.

Figure 4

figure 4

BglBrick plasmid copy numbers in DH1 and BLR(DE3). The blue bars are for DH1 strains, and the purple bars are for BLR(DE3) strains. The dark colored bars are for the single-plasmid strain, and the light colored bars are for the three-plasmid strain containing pBbA8a-CFP, pBbE5c-YFP and pBbS2k-RFP. Plasmids with the pBBR1 origin were not tested in the three-plasmid strain. (A) Plasmid copy number for single plasmid strain (B) DH1 plasmid copy number comparison for single and three plasmid strain (C) BLR(DE3) plasmid copy number comparison for single and three plasmid strain.

Full size image

From the results of strain and media dependence, catabolite repression, and inducer crosstalk experiments, the propionate inducible vectors may not be a good choice to be used in metabolic engineering for chemical or biofuel production, both of which frequently require high levels of carbon source and multiple plasmids under different expression machinery to optimize production. The propionate system has been reported to be useful for toxic protein production [26], but additional studies on its expression and regulation would be informative for its use in more complex systems.

Application of BglBrick plasmids

Expression of different fluorescent proteins from multiple plasmids in the same cell

The next step was to test the application of multiple BglBrick plasmids for orthogonal protein expression, and we chose BlgBrick plasmids with PBAD, PlacUV5 and Ptet promoters for these studies. To examine the expression control using these vectors, we tested the orthogonal protein production of the BglBrick vector system using three different fluorescent proteins. Each E. coli BLR(DE3) cell carried three BglBrick vectors, each with a unique replication origin, antibiotic resistance, and promoter: pBbA8a-CFP, pBbE5c-YFP and pBbS2k-RFP. These vectors contained cfp, yfp, and rfp under the control of PBAD, PlacUV5, and Ptet, respectively. Fluorescence excitation and emission wavelengths were carefully chosen so that there would be little overlap of fluorescence excitation and emission spectra between CFP, YFP, and RFP fluorescence detection.

When CFP fluorescence was measured, a clear dependence on arabinose concentration from 0 (low) to 5 mM (medium) to 20 mM (high) was observed (Figure 5). At the same arabinose concentration, variation in IPTG and aTc concentration had no effect on CFP fluorescence, indicating that PBAD in the BglBrick vector system was only inducible by arabinose, but not by IPTG and aTc, at least at the tested concentrations. Similar results were obtained for RFP fluorescence. At four tested aTc concentrations, rfp exhibited low (0 aTc), medium-low (12.5 nM aTc), medium-high (25 nM aTc), and high (40 nM aTc) expression. Both IPTG and arabinose had no significant effect on RFP fluorescence, indicating that Ptet is only responsive to aTc.

Figure 5

figure 5

Expression of three different proteins from a single strain at various inducer concentrations. pBbA8a-cfp, pBbE5c-yfp and pBbS2k-rfp were transformed in E. coli BLR(DE3) and the fluorescent proteins were expressed under various inducer concentration combinations.

Full size image

For PlacUV5, YFP fluorescence increased with IPTG concentration, confirming that PlacUV5 is responsive to IPTG. However, we also observed that increasing the arabinose concentration slightly increased the YFP fluorescence. This was not caused by the CFP's contribution to the YFP fluorescence signal, because otherwise stronger arabinose dependence would be expected in the absence of IPTG since low YFP expression would make the effect most apparent. On the other hand, increasing aTc concentration slightly decreased YFP fluorescence. This is also not due to the RFP's contribution to the YFP fluorescence, because the opposite effect - increasing in YFP fluorescence as aTc increases - would be expected. Previously, crosstalk between the IPTG-inducible Plac and the arabinose-inducible PBAD was observed but the molecular mechanism remains unclear [29]. One possible reason for this crosstalk may be the non-specific binding of AraC or TetR to PlacUV5. Regardless of the cause, the most apparent dependence of YFP fluorescence is on IPTG concentration. Overall, we demonstrated that three promoters from the BglBrick vectors can be orthogonally induced.

Copy number of plasmid in multiple plasmid strain

In order to assess the impact of metabolic burden on plasmid copy number, we determined the copy number of individual plasmids in a cell harboring all three plasmids. Here, E. coli BLR and DH1 were co-transformed with pSC101**-, p15A-, and ColE1-containing plasmids. Each plasmid harbored a different selection marker (resistance to ampicillin, chloramphenicol, or kanamycin), and cultures were grown in media supplemented with all three antibiotics. Using real-time quantitative PCR, absolute copy number was determined for the plasmid harboring the kanamycin selection marker nptII. The results obtained (Figure 4(B), (C)) indicate that plasmids containing the p15A and ColE1 origins had a higher copy number in cells harboring all three plasmids than in cells harboring a single plasmid. For pSC101**, on the other hand, the copy number was unchanged from that observed under single plasmid conditions. Our results are consistent with those found in literature [28, 41] and may be explained by differences in the replication control mechanism of the origins. As a broad generalization, plasmid replication control is either relaxed or stringent, with plasmid replication being uncoupled from host chromosomal DNA synthesis in the former case [42]. ColE1 and related plasmids (which includes p15A) replicate under relaxed control while pSC101 is stringent [43]. Consistent with our results (Figure 4), variation in pSC101 copy number is thus not to be expected under stress conditions because plasmid replication is tightly coupled to the bacterial cell cycle.

Conclusion and Discussion

Synthetic biology provides a powerful tool that can be applied to a variety of goals: engineering metabolic pathways, overproducing a specific protein, examining fundamental biology. In this report, we describe expression vectors that would be useful to researchers using BglBrick standard to express single genes or entire metabolic pathways. We assembled a library of expression vectors to be compatible with a recently-developed BglBrick standard, and as a result, any DNA sequences with BglBrick standard format can be cloned into these vectors. In addition, we designed the vectors to allow for precise control of the expression of multiple genes, whether that be to construct a metabolic pathway or for any other multi-gene expression project. The datasheets for these BglBrick vectors provide information about their expression properties under various conditions (e.g., medium, strain, and with different inducers). These datasheets will serve as an initial point of reference when designing and optimizing complex gene expression systems.

In the report, we demonstrated the compatible and controllable aspects of the vectors with fluorescent proteins as a model system only. In addition, we have used these vectors to construct complex metabolic pathways, such as the isoprenoid biosynthetic pathway [44], and to express a library of membrane transporter proteins [45]. These works involved the transformation of host cells with either multiple plasmids or single plasmid containing different genes expressed at various levels.

All the BglBrick vectors and their datasheets have been deposited in Joint BioEnergy Institute Public Registry (https://public-registry.jbei.org) and are available for searching and reviewing the sequences and annotations. We also made these vector strains and datasheets available through institutional strain distributor and a non-profit strain distributing organization, such as Addgene (http://www.addgene.org) with an appropriate material transferring process.

To expand the use of these vectors for further application, various additional biological parts can be designed with the BglBrick format. For example, new parts composed of a combination of various terminators and promoters have been designed to make multiple operon variants of BglBrick plasmids (data not shown). These parts can be appended or prepended either to original BglBrick vectors or to BglBrick plasmids already containing pathway genes to allow co-expression of different pathways or genes from the same plasmid. In addition, variants of the BglBrick plasmids described here that do not include any specific promoter-repressor components have been prepared (Additional file 2). These variants would expand the use of BglBrick vectors for application with various natural or synthetic promoters.

Finally, the concept of standardized biological parts allows automated assembly of recombinant DNA and will likely prove to be a powerful tool in engineering biological systems. Recently, the automated DNA assembly using BglBrick standard and 2 antibiotic (2ab) assembly strategy has been reported [46]. In this report, an automated assembly protocol was introduced for high throughput parallel assembly of BglBrick part DNAs. The BglBrick vectors we report here are compatible to this automation strategy and can also be used for assembling various combinations of pathway genes for the screening to optimize any target metabolic pathway.

Methods

Strains and plasmids

E. coli DH10B was used for cloning. E. coli BLR (DE3) and DH1 were used for expression studies with BglBrick vectors. Plasmids and BglBrick parts used in this study are listed in Table 1. Media were supplemented with 100 μg/mL ampicillin, 35 μg/mL chloramphenicol, or 50 μg/mL kanamycin to select for plasmid maintenance. All strains were grown at 30°C unless described otherwise.

Table 1 Summary of plasmids and parts used for the construction of BglBrick vector

Full size table

Construction of BglBrick vector parts

The template plasmids or parts for the BglBrick vectors constructed here are listed in Table 1 and the primers for PCR amplification are listed in Table 2. Each gene component has been either PCR amplified from a template using Phusion™ High-Fidelity DNA polymerase (New England BioLabs, F-530) or digested from template plasmids and incorporated into the BglBrick vector plasmid by standard restriction digestion/ligation method.

Table 2 Primers for BglBrick vector construction

Full size table

Replication origins

The p15A origin was obtained from plasmid pZA31-luc, the ColE1 origin from plasmid pZE12-luc, and the pSC101* origin from plasmid pZS*24-MCS1 [39]. A BglII site in the pSC101* origin was eliminated by site-directed mutagenesis. The oligonucleotides used to remove the BglII site in the pSC101* origin were pSC101QC F1 and pSC101QC R1 creating pSC101**. Each origin of replication and terminator sequence module was cloned in using the AvrII and SacI sites. Plasmid pMBIS was used as template for the pBBR1 origin. The BBR1 region was amplified in two parts, and primers were designed to make a C to T point mutation in the overlapping region of the two PCR products to increase the copy number as reported [22]. Forward primer pBBR1 F1 (5'- gatcaCCTAGGctacagccgatagtctggaacagcgc -3') and reverse primer pBBR1 mut R1 (5'- ccggcaccgtgtTggcctacgtggtc -3') were used to generate the first product with a 5'-AvrII site, and forward primer pBBR1 mut F1 (5'- gaccacgtaggccAacacggtgccgg -3') and reverse primer pBBR1 R2 (5'- agatcaACTAGTgcctccggcctgcggcctgcgcgcttcg -3') were used to generate the second product with a 3'- SpeI site. These two parts were then combined in a splice overlap extension-PCR (SOE-PCR) reaction with primers pBBR1 F1 and pBBR1 R2 to create the product containing the entire pBBR1 origin of replication. The PCR product was digested with AvrII and SpeI and ligated with existing intermediate vectors to generate three additional intermediate vectors containing pBBR1 and each antibiotic resistance module.

Antibiotic resistance

All antibiotic resistance segments (SacI to AatII) were digested from the parent plasmids listed in Table 1. The BglBrick restriction site found in Cm and Km resistance gene components were removed by site-specific mutagenesis. The oligonucleotides used to remove the EcoRI site in the Cm resistance gene were the forward CmQC F1 (5'-ctttcattgccatacgAaattccggatgagcattc-3') and reverse CmQC R1 (5'-gaatgctcatccggaattTcgtatggcaatgaaag-3') (point mutation is capitalized). The oligonucleotides used to remove the BglII site in the Km resistance gene promoter were KanQC F1 (5'- cctgtctcttgatcagatcAtgatcccctgc-3') and KanQC R1 (5'- gcaggggatcaTgatctgatcaagagacagg-3').

Rfp (or gfp) and terminator

The rfp-terminator (rfp-term) module was constructed by splice overlap extension-PCR (SOE-PCR [47]. First, SOE-PCR was performed to generate rfp with BglBrick restriction sites EcoRI and BglII and RBS (TTTAAGAAGGAGATATACAT) on the 5'-end, and with BglBrick restriction sites BamHI and XhoI and a double terminator sequence followed by an AatII site on the 3'-end. Two PCRs were performed to amplify rfp and the terminator separately, using primers to introduce the restriction sites, RBS, and overlapping sequence for SOE-PCR. Forward primer RFP F1 and reverse primer RFP R1 were used to generate the product containing EcoRI, BglII, RBS, and rfp. Forward primer Term F1 and reverse primer Term R1 were used to generate the product containing the BamHI, XhoI, the double terminator sequence and AvrII. The products were then combined and a second PCR was performed with the RFP F1 and Term R1. The resulting SOE-PCR product (_rfp_-term) was in turn used in additional SOE-PCRs to generate complete modules containing the 8 different promoter systems followed by _rfp_-term.

Promoters and repressors

The primers for each promoter system (containing repressor and promoter) were engineered to include a 5'AatII site for later cloning steps and an rfp overlapping sequence on the 3' end to facilitate the addition of the _rfp_-terminator module via SOE-PCR. When the promoter system contained any of the 4 BglBrick restriction sites, an additional set of primers to remove the restriction site was prepared for SOE-PCR. Primers for each promoter system are listed in the Table 2.

Final pBb vector assembly

To construct the promoter system with the _rfp_-terminator module, each of the eight promoter system modules were combined with _rfp_-terminator by SOE-PCR using the F1 primer from each promoter system construction and the reverse primer Term R1. These eight products were then digested with AatII and AvrII and individually ligated with the AatII and AvrII digested fragment from the intermediate plasmid containing _amp_R and ColE1. The eleven remaining intermediate plasmids were then digested with AvrII and AatII to isolate the antibiotic resistance-replication origin (AR-ori) modules. In total, each of the twelve AR-ori modules was ligated with each of the eight AvrII and AatII digested promoter-rfp-terminator modules to produce 96 unique pBb vectors.

Data sheet experiments

General

Ampicillin-resistant pBb plasmids were transformed into E. coli BLR(DE3) electrocompetent cells and/or E. coli DH1 electrocompetent cells and plated on LB-agar with 50 μg/ml Carbenicillin (Cb) for overnight incubation at 37°C. A single colony was picked and used to prepare the seed culture in LB broth containing 50 μg/ml Cb. Fresh culture tubes with 3 ml LB broth containing 50 μg/ml Cb were inoculated with 60 μl overnight seed culture and grown at 37°C, 200 rpm until the OD600 reached about 0.55. All experiments were replicated in triplicate.

Inducer dose response

The outer wells of a 96-well clear-bottom plate with lid (Corning no: 3631) were filled with 200 μl sterile water and the plate was sterilized by using the optimal crosslink setting on the UV crosslinker (Spectronics, Corp.). 10 × serial dilutions were made of inducers appropriate for each plasmid being tested and 20 μl was pipetted into each well so that the final volume of 200 μl would give 1x inducer concentration. Each plate included 3 control wells containing pBbE5a-RFP (or GFP) in BLR(DE3) induced with 12.5 μM IPTG. Appropriate volumes of culture and LB/Cb were added to the 96-well plate with lid and grown in a Safire (Tecan) microplate reader at 30°C for 20.5 hours. OD600 and RFP fluorescence were measured every 570 seconds using an excitation wavelength of 584 nm and an emission wavelength of 607 nm. For the constructs containing GFP (pBbB plasmids), an excitation wavelength of 400 nm and an emission wavelength of 510 nm were used for fluorescence measurement.

Strain and medium dependence

E. coli BLR(DE3) and DH1 transformed with pBb plasmid were streaked on LB-agar with 50 μg/ml Cb and grown at 37°C overnight. Seed cultures were prepared in LB broth containing 50 μg/mL Cb inoculated with a single colony and grown at 37°C, 200 rpm overnight. Each experiment with a pBb plasmid-harboring strain was replicated in triplicate, and each set of experiments included 6 control tubes containing pBbE5a-RFP in BLR(DE3) in LB (3 uninduced and 3 induced with 100 μM IPTG). For the M9 minimal medium (MM) experiment, three rounds of adaptation were performed in minimal medium. After adaptation, fresh tubes with 3 mL fresh MM were inoculated with adapted seed culture to OD600 approximately 0.15 and grown at 37°C to OD600 of approximately 0.5. One set of tubes were induced at different inducer concentrations and all cultures were grown at 30°C, 200 rpm for 66 hours post induction. Samples were taken at 18 h, 42 h and 66 h post induction. 25 μL of culture was taken into a 96-well plate and diluted to 200 μL with fresh medium, and OD600 and fluorescence were measured. For LB and TB media experiments, overnight seed cultures were used directly for inoculation without adaptation.

Catabolite repression and inducer crosstalk

Seed cultures were prepared as described in strain and medium dependence experiments. Three different media (MM, phosphate buffered LB, and phosphate buffered TB) containing 1% glucose were used for catabolite repression experiments. Inoculated cultures were grown at 37°C to OD600 of approximately 0.5, and induced to achieve maximum expression (100 μM IPTG, 20 mM arabinose, 400 nM aTc, or 20 mM propionate). Cultures were grown at 30°C, 200 rpm for 66 hours post induction, and OD600 and fluorescence was measured at each sampling. For the inducer crosstalk experiment, LB broth containing 50 μg/ml Cb was inoculated with seed cultures containing E. coli BLR(DE3) harboring the ampicillin-resistant pBb. Cultures were induced at OD600 of approximately 0.5 with the appropriate inducer, and one of the non-cognate inducers was also added to the individually induced culture during induction. Cultures were grown at 30°C, 200 rpm for 18 hours post-induction, and OD600 and fluorescence were measured using the Tecan.

Bacterial DNA isolation to quantify plasmid copy number

E. coli DH1 and BLR were grown overnight at 30°C, 200 rpm shaking after inoculating 5 mL cultures of LB medium (supplemented with 50 μg/mL kanamycin) with single colonies from freshly streaked plates. After sub-culturing (1:50) into shake flasks containing 50 mL of LB medium (supplemented with 50 μg/mL kanamycin), cells were grown at 30°C, 200 rpm shaking until an OD600 of 0.3-0.4 was reached. At this time, 1 mL of cells was spun down and the supernatant subsequently removed. The cell pellets were then frozen. Total DNA was isolated from these pellets for use at a future date. The DNA isolation method reported in previous publications [33, 48] was adopted. Bacterial cell pellets were resuspended in 400 μL of 50 mM Tris/50 mM EDTA, pH 8, by vortexing. Cell membranes were permeablized by the addition of 8 μL of 50 mg/mL lysozyme (Sigma) in 10 mM Tris/1 mM EDTA, pH 8, followed by incubation at 37°C for 30 min. To complete cell lysis, 4 μL of 10% SDS and 8 μL of 20 mg/mL Proteinase K solution (Invitrogen) were added to each tube, mixed with a syringe with 21-gauge, 1.5-inch needle, and incubated at 50°C for 30 min. Proteinase K was subsequently heat inactivated at 75°C for 10 min, and RNA was digested with the addition of 2 μL of 100 mg/mL RNase A solution (Qiagen) followed by incubation at 37°C for 30 min. Total DNA extraction then proceeded by adding 425 μL of 25:24:1 phenol:chloroform:isoamyl alcohol, vortexing vigorously for ~1 min, allowing the tubes to sit at room temperature for a few minutes, and then centrifugation for 5 min at 14,000 × g, 4°C. Next, 300 μL of the upper aqueous phase was transferred to a new tube using a wide-opening pipet tip. DNA extraction continued by adding 400 μL of chloroform to each tube, vigorous vortexing for ~1 min, allowing the tubes to sit at room temperature for a few minutes, and centrifugation for 5 min at 14,000 × g, 4°C. Next, 200 μL of the upper aqueous phase was transferred to a new tube using a wide-opening pipet tip. Following chloroform extraction, total DNA was ethanol precipitated overnight, washed with 70% ethanol, and finally resuspended in 40 μL of nuclease-free water. DNA concentration and purity were assayed using a Nanodrop spectrophotometer, and integrity examined on 1% agarose gels.

Real-time qPCR quantification of plasmid copy number

Primer sets specific to the neomycin phosphotransferase II (nptII) gene (forward: GCGTTGGCTACCCGTGATAT, reverse: AGGAAGCGGTCAGCCCAT) [49] and 16S rDNA gene (forward: CCGGATTGGAGTCTGCAACT, reverse: GTGGCATTCTGATCCACGATTAC) [33] were used for real-time qPCR. These primers amplified a single product of the expected size as confirmed by the melting temperatures of the amplicons. nptII resides in single-copy on the plasmids characterized in this study, while 16S rDNA gene resides on multiple copies on the E. coli chromosome [36] and was used for normalization [22, 33, 35]. In order to determine plasmid copy number (i.e. number of plasmids per genomic equivalent), E. coli DH1 and BLR transgenic strains with a single nptII integration (data not shown) were used for calibration. Total DNA isolated from each strain was first digested overnight using EcoR I (New England Biolabs) at 37°C. Real-time qPCR was conducted on a BioRad iCycler with 96-well reaction blocks in the presence of SYBR Green under the following conditions: 1X iQ SYBR Green Supermix (BioRad), 150 nM nptII (500 nM 16S) primers in a 25 μL reaction. Real-time qPCR cycling was 95°C for 3 min, followed by 40 cycles of 30 sec at 95°C, 30 sec at 60°C, and 30 sec at 72°C. Threshold cycles (Ct) were determined with iCycler (BioRad) software for all samples. A standard curve was prepared for quantification. For this purpose, a four-fold dilution series of a total of seven dilutions was prepared from a digested total DNA sample, and each dilution was subjected to qPCR analysis in at least duplicate with either the _nptII_- or 16S-specific primers. Obtained Ct values were used by the iCycler software package to plot a standard curve that allowed quantification of nptII or 16S in the digested total DNA samples (i.e. unknowns) relative to the DNA sample used to prepare the standard curve.

Expression control in the three-plasmid system

BLR (DE3) cells were transformed with three plasmids: pBbA8a-CFP, pBbE5c-YFP and pBbS2k-RFP. A single colony was used to inoculate LB medium and the overnight cultures were grown at 37°C in minimal medium (M9 medium supplied with 75 mM MOPS, 2 mM MgSO4, 1 mg/L thiamine, 10 nM FeSO4, 0.1 mM CaCl2 and micronutrients) supplemented with 2% glucose. Cells were induced at OD ~0.6 with combinations of different amounts of arabinose, IPTG and aTc. In detail, the arabinose concentrations used were 0, 5 mM, and 20 mM; the IPTG concentrations used were 0, 30 μM, and 100 μM; and the aTc concentrations used were 0, 12.5 nM, 25 nM, and 40 nM. After induction, cells were grown at 30°C for 12 hours until cell culture fluorescence was measured. Cell culture fluorescence was recorded on a SpectraMax M2 plate reader (Molecular Devices) using 96-well Costar plates with each well containing 150 μl of cell culture. For CFP, λex = 433 nm and λem = 474 nm were used; for YFP, λex = 500 nm and λem = 530 nm were used; and for RFP, λex = 584 nm and λem = 615 nm were used. Cell density was estimated by measuring the absorbance at 610 nm. Cell culture fluorescence from each well was normalized by its cell density. All the data were average from at least two independent measurements.

Abbreviations

BBF:

BioBricks Foundation

RFC:

request for comments

RBS:

ribosomal binding site

SOE:

splice overlap extension

PCR:

polymerase chain reaction

RFP:

red fluorescent protein

GFP:

green fluorescent protein

CFP:

cyan fluorescent protein

YFP:

yellow fluorescent protein

CCR:

carbon catabolite repression

aTc:

anhydrotetracycline

IPTG:

isopropyl-β-D-thiogalactoside

Amp:

ampicillin

Km:

kanamycin

Cm:

chloramphenicol

Cb:

carbenicillin

MM:

minimal media

LB:

Luria-Bertani

TB:

Terrific broth

OD:

optical density

qPCR:

quantitative PCR

References

  1. Khosla C, Keasling JD: Metabolic engineering for drug discovery and development. Nat Rev Drug Discov 2003,2(12):1019-25. 10.1038/nrd1256
    Article Google Scholar
  2. Lee SK, Chou H, Ham TS, Lee TS, Keasling JD: Metabolic engineering of microorganisms for biofuels production: from bugs to synthetic biology to fuels. Curr Opin Biotechnol 2008,19(6):556-63. 10.1016/j.copbio.2008.10.014
    Article Google Scholar
  3. Atsumi S, Liao JC: Metabolic engineering for advanced biofuels production from Escherichia coli. Curr Opin Biotechnol 2008,19(5):414-9. 10.1016/j.copbio.2008.08.008
    Article Google Scholar
  4. Raab RM, Tyo K, Stephanopoulos G: Metabolic engineering. Adv Biochem Eng Biotechnol 2005, 100: 1-17.
    Google Scholar
  5. Pieper DH, Reineke W: Engineering bacteria for bioremediation. Curr Opin Biotechnol 2000,11(3):262-70. 10.1016/S0958-1669(00)00094-X
    Article Google Scholar
  6. Martin VJ, Pitera DJ, Withers ST, Newman JD, Keasling JD: Engineering a mevalonate pathway in Escherichia coli for production of terpenoids. Nat Biotechnol 2003,21(7):796-802. 10.1038/nbt833
    Article Google Scholar
  7. Pitera DJ, Paddon CJ, Newman JD, Keasling JD: Balancing a heterologous mevalonate pathway for improved isoprenoid production in Escherichia coli. Metab Eng 2007,9(2):193-207. 10.1016/j.ymben.2006.11.002
    Article Google Scholar
  8. Alper H, Fischer C, Nevoigt E, Stephanopoulos G: Tuning genetic control through promoter engineering. Proc Natl Acad Sci USA 2005,102(36):12678-83. 10.1073/pnas.0504604102
    Article Google Scholar
  9. Ajikumar PK, Xiao WH, Tyo KE, Wang Y, Simeon F, Leonard E, Mucha O, Phon TH, Pfeifer B, Stephanopoulos G: Isoprenoid pathway optimization for Taxol precursor overproduction in Escherichia coli. Science 2010,330(6000):70-4. 10.1126/science.1191652
    Article Google Scholar
  10. Dejong JM, Liu Y, Bollon AP, Long RM, Jennewein S, Williams D, Croteau RB: Genetic engineering of taxol biosynthetic genes in Saccharomyces cerevisiae. Biotechnol Bioeng 2006,93(2):212-24. 10.1002/bit.20694
    Article Google Scholar
  11. Yan Y, Kohli A, Koffas MA: Biosynthesis of natural flavanones in Saccharomyces cerevisiae. Appl Environ Microbiol 2005,71(9):5610-3. 10.1128/AEM.71.9.5610-5613.2005
    Article Google Scholar
  12. Li MZ, Elledge SJ: Harnessing homologous recombination in vitro to generate recombinant DNA via SLIC. Nat Methods 2007,4(3):251-6. 10.1038/nmeth1010
    Article Google Scholar
  13. Shao Z, Zhao H, Zhao H: DNA assembler, an in vivo genetic method for rapid construction of biochemical pathways. Nucleic Acids Res 2009,37(2):e16.
    Article MathSciNet Google Scholar
  14. Gibson DG, Young L, Chuang RY, Venter JC, Hutchison CA, Smith HO: Enzymatic assembly of DNA molecules up to several hundred kilobases. Nat Methods 2009,6(5):343-5. 10.1038/nmeth.1318
    Article Google Scholar
  15. Keasling JD: Synthetic biology for synthetic chemistry. ACS Chem Biol 2008,3(1):64-76. 10.1021/cb7002434
    Article Google Scholar
  16. Lee SY, Kim HU, Park JH, Park JM, Kim TY: Metabolic engineering of microorganisms: general strategies and drug production. Drug Discov Today 2009,14(12):78-88.
    Article Google Scholar
  17. Martin CH, Nielsen DR, Solomon KV, Prather KL: Synthetic metabolism: engineering biology at the protein and pathway scales. Chem Biol 2009,16(3):277-86. 10.1016/j.chembiol.2009.01.010
    Article Google Scholar
  18. Canton B, Labno A, Endy D: Refinement and standardization of synthetic biological parts and devices. Nat Biotechnol 2008,26(7):787-93. 10.1038/nbt1413
    Article Google Scholar
  19. Knight TFJ: Idempotent Vector Design for Standard Assembly of Biobricks. DSpace@MIT 2003. [http://hdl.handle.net/1721.1/21168]
    Google Scholar
  20. Anderson JC, Dueber JE, Leguia M, Wu GC, Goler JA, Arkin AP, Keasling JD: BglBricks: A flexible standard for biological part assembly. Journal of Biological Engineering 2010,4(1):1-12. 10.1186/1754-1611-4-1
    Article Google Scholar
  21. Shetty RP, Endy D, Knight TF Jr: Engineering BioBrick vectors from BioBrick parts. J Biol Eng 2008, 2: 5. 10.1186/1754-1611-2-5
    Article Google Scholar
  22. Tao L, Jackson RE, Cheng Q: Directed evolution of copy number of a broad host range plasmid for metabolic engineering. Metab Eng 2005,7(1):10-7. 10.1016/j.ymben.2004.05.006
    Article Google Scholar
  23. Anthony JR, Anthony LC, Nowroozi F, Kwon G, Newman JD, Keasling JD: Optimization of the mevalonate-based isoprenoid biosynthetic pathway in Escherichia coli for production of the anti-malarial drug precursor amorpha-4,11-diene. Metab Eng 2009,11(1):13-9. 10.1016/j.ymben.2008.07.007
    Article Google Scholar
  24. Lee SK, Newman JD, Keasling JD: Catabolite repression of the propionate catabolic genes in Escherichia coli and Salmonella enterica: evidence for involvement of the cyclic AMP receptor protein. J Bacteriol 2005,187(8):2793-800. 10.1128/JB.187.8.2793-2800.2005
    Article Google Scholar
  25. Lee SK, Keasling JD: A propionate-inducible expression system for enteric bacteria. Appl Environ Microbiol 2005,71(11):6856-62. 10.1128/AEM.71.11.6856-6862.2005
    Article Google Scholar
  26. Lee SK, Keasling JD: Heterologous protein production in Escherichia coli using the propionate-inducible pPro system by conventional and auto-induction methods. Protein Expr Purif 2008,61(2):197-203. 10.1016/j.pep.2008.06.008
    Article Google Scholar
  27. Guzman LM, Belin D, Carson MJ, Beckwith J: Tight regulation, modulation, and high-level expression by vectors containing the arabinose PBAD promoter. J Bacteriol 1995,177(14):4121-30.
    Google Scholar
  28. Hajimorad M, Gray PR, Keasling JD: A framework and model system to investigate linear system behavior in Escherichia coli. J Biol Eng 2011, 5: 3. 10.1186/1754-1611-5-3
    Article Google Scholar
  29. Lee SK, Chou HH, Pfleger BF, Newman JD, Yoshikuni Y, Keasling JD: Directed evolution of AraC for improved compatibility of arabinose- and lactose-inducible promoters. Appl Environ Microbiol 2007,73(18):5711-5. 10.1128/AEM.00791-07
    Article Google Scholar
  30. Gorke B, Stulke J: Carbon catabolite repression in bacteria: many ways to make the most out of nutrients. Nat Rev Microbiol 2008,6(8):613-24. 10.1038/nrmicro1932
    Article Google Scholar
  31. Skulj M, Okrslar V, Jalen S, Jevsevar S, Slanc P, Strukelj B, Menart V: Improved determination of plasmid copy number using quantitative real-time PCR for monitoring fermentation processes. Microb Cell Fact 2008, 7: 6. 10.1186/1475-2859-7-6
    Article Google Scholar
  32. Carapuca E, Azzoni AR, Prazeres DM, Monteiro GA, Mergulhao FJ: Time-course determination of plasmid content in eukaryotic and prokaryotic cells using real-time PCR. Mol Biotechnol 2007,37(2):120-6. 10.1007/s12033-007-0007-3
    Article Google Scholar
  33. Lee CL, Ow DS, Oh SK: Quantitative real-time polymerase chain reaction for determination of plasmid copy number in bacteria. J Microbiol Methods 2006,65(2):258-67. 10.1016/j.mimet.2005.07.019
    Article Google Scholar
  34. Lee C, Kim J, Shin SG, Hwang S: Absolute and relative QPCR quantification of plasmid copy number in Escherichia coli. J Biotechnol 2006,123(3):273-80. 10.1016/j.jbiotec.2005.11.014
    Article Google Scholar
  35. Tao L, Jackson RE, Rouviere PE, Cheng Q: Isolation of chromosomal mutations that affect carotenoid production in Escherichia coli: mutations alter copy number of ColE1-type plasmids. FEMS Microbiol Lett 2005,243(1):227-33. 10.1016/j.femsle.2004.12.015
    Article Google Scholar
  36. Lee C, Lee S, Shin SG, Hwang S: Real-time PCR determination of rRNA gene copy number: absolute and relative quantification assays with Escherichia coli. Appl Microbiol Biotechnol 2008,78(2):371-6. 10.1007/s00253-007-1300-6
    Article Google Scholar
  37. Friehs K: Plasmid copy number and plasmid stability. Adv Biochem Eng Biotechnol 2004, 86: 47-82.
    Google Scholar
  38. Antoine R, Locht C: Isolation and molecular characterization of a novel broad-host-range plasmid from Bordetella bronchiseptica with sequence similarities to plasmids from gram-positive organisms. Mol Microbiol 1992,6(13):1785-99. 10.1111/j.1365-2958.1992.tb01351.x
    Article Google Scholar
  39. Lutz R, Bujard H: Independent and tight regulation of transcriptional units in Escherichia coli via the LacR/O, the TetR/O and AraC/I1-I2 regulatory elements. Nucleic Acids Res 1997,25(6):1203-10. 10.1093/nar/25.6.1203
    Article Google Scholar
  40. Manen D, Xia G, Caro L: A locus involved in the regulation of replication in plasmid pSC101. Mol Microbiol 1994,11(5):875-84. 10.1111/j.1365-2958.1994.tb00366.x
    Article Google Scholar
  41. Grabherr R, Bayer K: Impact of targeted vector design on Co/E1 plasmid replication. Trends Biotechnol 2002,20(6):257-60. 10.1016/S0167-7799(02)01950-9
    Article Google Scholar
  42. Glass RE: Gene function: E. coli and its heritable elements. University of California Press; 1982.
    Google Scholar
  43. Kues U, Stahl U: Replication of plasmids in gram-negative bacteria. Microbiol Rev 1989,53(4):491-516.
    Google Scholar
  44. Redding-Johanson AM, Batth TS, Chan R, Krupa R, Szmidt HL, Adams PD, Keasling JD, Lee TS, Mukhopadhyay A, Petzold CJ: Targeted Proteomics for Metabolic Pathway Optimization: Application to Terpene Production. Metab Eng 2011,13(2):194-203. 10.1016/j.ymben.2010.12.005
    Article Google Scholar
  45. Dunlop MJ, Dossani ZY, Szmidt HL, Chu HC, Lee TS, Keasling JD, Hadi MZ, Mukhopadhyay A: Engineering microbial biofuel tolerance and export using efflux pumps. Mol Syst Biol 2011, 7: 487.
    Article Google Scholar
  46. Leguia M, Brophy J, Densmore D, Anderson JC: Automated assembly of standard biological parts. Methods Enzymol 2011, 498: 363-97.
    Article Google Scholar
  47. Horton RM, Cai ZL, Ho SN, Pease LR: Gene splicing by overlap extension: tailor-made genes using the polymerase chain reaction. Biotechniques 1990,8(5):528-35.
    Google Scholar
  48. Pushnova EA, Geier M, Zhu YS: An easy and accurate agarose gel assay for quantitation of bacterial plasmid copy numbers. Anal Biochem 2000,284(1):70-6. 10.1006/abio.2000.4668
    Article Google Scholar
  49. Mason G, Provero P, Vaira AM, Accotto GP: Estimating the number of integrations in transformed plants by quantitative real-time PCR. BMC Biotechnol 2002, 2: 20. 10.1186/1472-6750-2-20
    Article Google Scholar

Download references

Acknowledgements

We thank Nathan Hillson, Harry Beller (JBEI), and Seth Karten (LBNL) for helpful comments on the manuscript and Timothy Ham (JBEI) for JBEI registry works. This work was funded in part by the DOE Joint BioEnergy Institute (http://www.jbei.org) supported by the U. S. Department of Energy, Office of Science, Office of Biological and Environmental Research, through contract DE-AC02-05CH11231 between Lawrence Berkeley National Laboratory and the U. S. Department of Energy and in part by the Synthetic Biology Engineering Research Center, which is funded by National Science Foundation through Award No. 0540879. FZ is funded by NSERC Canada.

Author information

Author notes

  1. Sung Kuk Lee
    Present address: Chemical Engineering, Ulsan National Institute of Science and Technology, Schools of Nano-Bioscience &, Ulsan, Korea

Authors and Affiliations

  1. Joint BioEnergy Institute, University of Antwerp (UIA), CA, 5885 Hollis St, 94608, Emeryville, USA
    Taek Soon Lee, Rachel A Krupa, Fuzhong Zhang, Meghdad Hajimorad, Nilu Prasad, Sung Kuk Lee & Jay D Keasling
  2. Physical Biosciences Division, Lawrence Berkeley National Laboratory, CA, 94720, Berkeley, USA
    Taek Soon Lee, Rachel A Krupa, Nilu Prasad, Sung Kuk Lee & Jay D Keasling
  3. Department of Chemical & Biomolecular Engineering, University of California, CA, 94720, Berkeley, USA
    Fuzhong Zhang & Jay D Keasling
  4. Department of Bioengineering, University of California, CA, 94720, Berkeley, USA
    Fuzhong Zhang & Jay D Keasling
  5. Department of Electrical Engineering, University of California, CA, 94720, Berkeley, USA
    Meghdad Hajimorad & William J Holtz
  6. Synthetic Biology Engineering Research Center, University of California, CA, 94720, Berkeley, USA
    William J Holtz & Jay D Keasling

Authors

  1. Taek Soon Lee
    You can also search for this author inPubMed Google Scholar
  2. Rachel A Krupa
    You can also search for this author inPubMed Google Scholar
  3. Fuzhong Zhang
    You can also search for this author inPubMed Google Scholar
  4. Meghdad Hajimorad
    You can also search for this author inPubMed Google Scholar
  5. William J Holtz
    You can also search for this author inPubMed Google Scholar
  6. Nilu Prasad
    You can also search for this author inPubMed Google Scholar
  7. Sung Kuk Lee
    You can also search for this author inPubMed Google Scholar
  8. Jay D Keasling
    You can also search for this author inPubMed Google Scholar

Corresponding author

Correspondence toJay D Keasling.

Additional information

Declaration of competing interests

The authors declare that they have no competing interests.

Authors' contributions

The BglBrick vectors were designed by TSL, SKL, and JDK. The datasheet was designed by TSL, RK, and JDK. The vectors were constructed by RK and WJH, and initial datasheet experiment was performed by RK. Three-plasmid experiments were performed by FZ and NP, and the copy number measurement was performed by MH. The manuscript was drafted by TSL, RK, FZ, MH, WJH, and JDK. All authors read and approved the final manuscript.

Taek Soon Lee, Rachel A Krupa contributed equally to this work.

Electronic supplementary material

Authors’ original submitted files for images

Rights and permissions

Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Lee, T.S., Krupa, R.A., Zhang, F. et al. BglBrick vectors and datasheets: A synthetic biology platform for gene expression.J Biol Eng 5, 12 (2011). https://doi.org/10.1186/1754-1611-5-12

Download citation

Keywords