Deformation stacking fault probability and dislocation microstructure of cold worked Cu–Sn–5Zn alloys by x-ray diffraction line profile analysis (original) (raw)

Study of deformation stacking faults and dislocation microstructures in Cu–1Sn–Zn alloys

Dr. Somenath Dey

View PDFchevron_right

Influence of stacking fault energy and strain rate on the mechanical properties in Cu and Cu–Al–Zn alloys

Cuie Wen

Materials Science and Engineering: A, 2013

View PDFchevron_right

Effects of Deformation on Microstructure of Cu-Zn-Ni Alloy

HARUN ÇELİK

View PDFchevron_right

Characterization of crystallite size, dislocation characteristics and stacking faults in nanostructured mechanically alloyed Cu–Fe system using an advanced X-ray diffraction analysis method

Lemdani Ferroudja

View PDFchevron_right

Effect of stacking fault energy on mechanical behavior of bulk nanocrystalline Cu and Cu alloys

Hamed Bahmanpour

Acta Materialia, 2011

View PDFchevron_right

EFFECT OF COOLING RATE ON STRESS-STRAIN BEHAVIOUR AND MICROSTRUCTURE OF A CU- ZN- SN ALLOY

HARUN ÇELİK

View PDFchevron_right

Microstructure and mechanical properties of ultra fine grained Cu–Zn and Cu–Al alloys produced by cryorolling and annealing

Siva Prasad Katakam

Materials Science and Engineering A-structural Materials Properties Microstructure and Processing, 2008

View PDFchevron_right

Helical dislocations as vacancy sinks in β phase Cu–Zn–Al–Ni alloys

G. Serrano

Materials Science and Engineering: A, 2006

View PDFchevron_right

X-ray peak profile analysis of dislocation type, density and crystallite size distribution in cold deformed Pb-Ca-Sn alloys

Baya alili

Transactions of Nonferrous Metals Society of China, 2012

View PDFchevron_right

Role of stacking fault energy on the deformation characteristics of copper alloys processed by plane strain compression

AYMAN ALMUTLAQ

Materials Science and Engineering: A, 2011

View PDFchevron_right

X-ray diffraction studies of the decomposition and microstructural characterization of cold-worked powders of Cu–15Ni–Sn alloys by Rietveld analysis

Puspendu Sahu

Journal of Alloys and Compounds, 2004

View PDFchevron_right

The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: Deformation twinning, work hardening, and dynamic recovery

Kenneth Vecchio

Metallurgical and Materials …, 2001

View PDFchevron_right

Plastic deformation in Cu-Zn-Al 18r martensite. Electron microscopy analysis of dislocations

F. Lovey

Scripta Metallurgica et Materialia, 1992

View PDFchevron_right

An in situ ambient and cryogenic transmission electron microscopy study of the effects of temperature on dislocation behavior in CrCoNi-based high-entropy alloys with low stacking-fault energy

Robert Ritchie, Robert O Ritchie

Applied Physics Letters, 2021

View PDFchevron_right

Effect of stacking fault energy on deformation behavior of cryo-rolled copper and copper alloys

Hamed Bahmanpour

Materials Science and Engineering A-structural Materials Properties Microstructure and Processing, 2011

View PDFchevron_right

SEM and X-Ray Diffraction Studies On Microstructures in Cu-26.04%Zn-4.01%Al Alloy

HARUN ÇELİK

View PDFchevron_right

X-ray peak profile analysis of crystallite size distribution and dislocation type and density evolution in nano-structured Cu obtained by deformation at liquid nitrogen temperature

N. Thadhani

Materials Science and Engineering: A, 2005

View PDFchevron_right

Influence of grain size on the density of deformation twins in Cu–30%Zn alloy

Enrique Lavernia

Materials Science and Engineering: A, 2010

View PDFchevron_right

Characterization of Dislocation Rearrangement in FCC Metals during Work Hardening Using X-ray Diffraction Line-Profile Analysis

Yusuke Onuki

Quantum Beam Science

View PDFchevron_right

X-ray diffraction analysis of cold-worked Cu-Ni-Si and Cu-Ni-Si-Cr alloys by Rietveld method

hiba azzeddine

Transactions of Nonferrous Metals Society of China, 2011

View PDFchevron_right

Microstructural stability, defect structures and deformation mechanisms in a Ag3Sn/Cu3Sn alloy

Tumerkan Kesim

Journal of Materials Science, 2016

View PDFchevron_right

SEM studies of fractures in spinodally hardened Cu-9Ni-6Sn-X alloys

jaafar Hadi

View PDFchevron_right

Effects of Manganese on the Microstructures, Mechanical Properties and Deformation Characteristics of Cu-29Zn Alloy

Bondan Sofyan

Materials Science Forum

View PDFchevron_right

Microstructure and Mechanical Behavior of Hot Pressed Cu-Sn Powder Alloys

Medhat El-Hadek, Ahmed Nassef

Advances in Materials Science and Engineering, 2016

View PDFchevron_right

Effect of Ni Content on Microstructure and Characterization of Cu-Ni-Sn Alloys

xiaochao wang

Materials (Basel, Switzerland), 2018

View PDFchevron_right

Superlattice dislocations in the L12ordered structure of Cu2NiZn

J. Hosson

Philosophical Magazine A, 1983

View PDFchevron_right

The role of stacking faults and twin boundaries in grain refinement of a Cu–Zn alloy processed by high-pressure torsion

Yanbo Wang, Enrique Lavernia

Materials Science and Engineering: A, 2010

View PDFchevron_right

Effect of Cold Rolling and Annealing Temperature on the Characteristics of Cu-28Zn-3.2Mn Alloy

Bondan Sofyan

IOP Conference Series: Materials Science and Engineering

View PDFchevron_right

Changes of microstructure in CuNi25 alloy deformed at elevated temperature

Piotr Sakiewicz

2011

View PDFchevron_right