Fireside Corrosion in Oxy-Fuel Combustion of Coal (original) (raw)

Fireside Corrosion in Oxy Fuel Combustion of Coal/Biomass

Onaivi Daniel

View PDFchevron_right

OXY-COMBUSTION ENVIRONMENT CHARACTERIZATION: FIRE-AND STEAM-SIDE CORROSION IN ADVANCED COMBUSTION

Joe Tylczak

View PDFchevron_right

Fireside Corrosion of Applied and Modern Superheater-alloys Under Oxy-fuel Conditions

Silvia Masci

Energy Procedia, 2013

View PDFchevron_right

Fireside corrosion of selected alloys by ash recovered from coal-water slurry combustion

Harold Schobert

Fuel Processing Technology, 1997

View PDFchevron_right

FIRESIDE CORROSION OF SUPERHEATER MATERIALS IN OXYFUEL COMBUSTION

Erja Turunen

2010

View PDFchevron_right

IJERT-Fireside Corrosion in Oxy Fuel Combustion of Coal/Biomass

IJERT Journal

International Journal of Engineering Research and Technology (IJERT), 2016

View PDFchevron_right

Fireside Corrosion of Heat Exchanger Materials for Advanced Solid Fuel Fired Power Plants

Nigel Simms

Oxidation of Metals

View PDFchevron_right

Impact of iron-sulfide deposits on oxidized austenitic steels as simulation of corrosion and fireside-tube wastage in coal combustion

Begoña Rubio Villa

2003

View PDFchevron_right

Study of the continuous corrosion in an oxidation environment derived from the theoretical combustion products in a refinery. Case study: Ferritic steel ASTM A335 P91

Anibal Alviz-Meza

Journal of Physics: Conf. Series, 2017

View PDFchevron_right

Study of Continuous Corrosion on ASTM A335 P91 Steel in an Environment of CO2-O2-N2-H2O Derived from the Theoretical Combustion Products of a Mixture of Refining Gases at High Temperatures

Anibal Alviz-Meza

Chemical Engineering Transactions, 2018

View PDFchevron_right

Evaluation of Corrosion Damage Obtained During the Combustion Process in a Boiler. Case Study: Ferritic Steel ASTM A335 P91

Anibal Alviz-Meza

Chemical Engineering Transactions, 2018

View PDFchevron_right

An investigation into the likely impact of oxy-coal retrofit on fire-side corrosion behavior in utility boilers

Kevin Davis

International Journal of Greenhouse Gas Control, 2011

View PDFchevron_right

Gaseous corrosion of alloys and novel coatings in simulated environments for coal, waste and biomass boilers

Douglas Baxter

Materials and Corrosion, 2005

View PDFchevron_right

Low-temperature corrosion in co-combustion of biomass and solid recovered fuels

Emil Vainio

Fuel, 2016

View PDFchevron_right

Fireside Corrosion of Superheater Materials in Coal/Biomass Co-fired Advanced Power Plants

Satu Tuurna

Oxidation of Metals, 2013

View PDFchevron_right

Performance of superheater materials in simulated oxyfuel combustion conditions

Satu Tuurna

Materials and Corrosion, 2013

View PDFchevron_right

Discussion: “External Corrosion of Superheaters in Boilers Firing High-Alkali Coals” (Sedor, P., Diehl, E. K., and Barnhart, D. H., 1960, ASME J. Eng. Power, 82, pp. 181–190)

Richard Corey

Journal of Engineering for Power, 1960

View PDFchevron_right

Corrosion of nickel-base and iron-base alloys in a simulated fluidized-bed coal-combustion environment

Ian Wright

Oxidation of Metals, 1989

View PDFchevron_right

Pollutant and corrosion control efficient coal combustion technology

Marc Ottolini

2017

View PDFchevron_right

A Review paper on Erosion and Corrosion behavior of Coal combustion chamber

IJIRST - International Journal for Innovative Research in Science and Technology

View PDFchevron_right

Potential high temperature corrosion problems due to co-firing of biomass and fossil fuels

Melanie Montgomery

Materials and Corrosion, 2008

View PDFchevron_right

Fireside corrosion and steamside oxidation of 9–12%Cr martensitic steels exposed for long term testing

Melanie Montgomery

Corrosion Engineering, Science and Technology, 2009

View PDFchevron_right

High Temperature Corrosion of HVOF Coatings in Laboratory-Simulated Biomass Combustion Superheater Environments

Nigel Simms

Oxidation of Metals

View PDFchevron_right

Methodology for Evaluation of Corrosion Damage During Combustion Process in Refinery and Petrochemical Industry. Case Study: AISI 304 and ASTM A335 P5 Steels

Anibal Alviz-Meza

Chemical Engineering Transactions, 2017

View PDFchevron_right

Approaches to Modelling Fireside Corrosion of Superheater / Reheater Tubes in Coal and Biomass Fired Combustion Power Plants

chiara riccio

2021

View PDFchevron_right

Superheater fireside corrosion mechanisms in MSWI plants: Lab-scale study and on-site results

C. Rapin

Materials and Corrosion, 2010

View PDFchevron_right

Pre-oxidation and its effect on reducing high-temperature corrosion of superheater tubes during biomass firing

Melanie Montgomery

Surface Engineering, 2016

View PDFchevron_right

Influence of preoxidation on high temperature corrosion of a Ni-based alloy under conditions relevant to biomass firing

Melanie Montgomery

Surface & Coatings Technology, 2017

View PDFchevron_right

Influence of Preoxidation on High-Temperature Corrosion of a FeCrAl Alloy Under Conditions Relevant to Biomass Firing

Melanie Montgomery

Oxidation of Metals, 2017

View PDFchevron_right

High temperature corrosion of cast heat resisting steels in CO+CO2 gas mixtures

Jader Furtado

Corrosion Science, 2008

View PDFchevron_right

High Temperature Corrosion under Laboratory Conditions Simulating Biomass-Firing: A Comprehensive Characterization of Corrosion Products

Melanie Montgomery

Energy & Fuels, 2014

View PDFchevron_right

Nickel-base superalloys for ultra-supercritical coal-fired power plants: Fireside corrosion. Laboratory studies and power plant exposures

Diana Carolina Molina Florez

Fuel, 2013

View PDFchevron_right

High-Temperature Corrosion of Stainless Steels and Ni Alloys During Combustion of Urea–Ammonium Nitrate (UAN) Fuel

Gennady Shter

Oxidation of Metals, 2016

View PDFchevron_right