EUROMET project no 429: Comparison of 10 V electronic voltage standards (original) (raw)

Bilateral comparison of 10 V standards between the NSAI–NML (Ireland) and the BIPM, January to February 2013 (part of the ongoing BIPM key comparison BIPM.EM-K11.a and b)

O. Power

Metrologia, 2014

View PDFchevron_right

Final report on APMP.EM.BIPM-K11.4: Comparison of 1.018 V and 10 V standards between the VMI (Socialist Republic of Vietnam) and the KRISS (Republic of Korea)

Phung Thi Thuy Linh (K14 HL)

Metrologia, 2013

View PDFchevron_right

Evaluation of Long-Term Stability of High-Precision Standard for Low-Frequency Voltage Measurement

Valentyn Isaiev

2022

View PDFchevron_right

Investigation of the Long- and Medium-Term Drift of Zener Diode-Based Voltage Standards

O. Power

IEEE Transactions on Instrumentation and Measurement, 2005

View PDFchevron_right

Recent developments in BIPM voltage standard comparisons

O. Power

IEEE Transactions on Instrumentation and Measurement, 2001

View PDFchevron_right

In-Service Characterization of Electronic Voltage Standards

oliver power

IEEE Transactions on Instrumentation and Measurement, 2005

View PDFchevron_right

Bilateral comparison of 1 V and 10 V standards between the INM (Romania) and the BIPM, August to October 2013 (part of the ongoing BIPM key comparison BIPM.EM-K11.a and b)

Hala Abdelmegeed

Metrologia, 2014

View PDFchevron_right

10-V round-robin test conducted on a solid-state DC voltage standard

Thomas Kiess

IEEE Transactions on Instrumentation and Measurement, 2000

View PDFchevron_right

Final report on supplementary comparison EURAMET.EM-S29: Traceability of DC high voltage reference measuring systems up to 200 kV

M. Matus

Metrologia, 2012

View PDFchevron_right

A new automatic system for calibrating the solid state DC voltage reference standards at NIS, Egypt

Hala Abdelmegeed

MAPAN, 2011

View PDFchevron_right

Final Report of Euromet Project 599: Comparison of voltage ratio standards

Beat Jeckelmann

Metrologia, 2005

View PDFchevron_right

High performance selectable-value transportable high dc voltage standard

Roberto Cerri

Measurement, 2017

View PDFchevron_right

Comparison EUROMET.EM-K8 of DC Voltage Ratio: Results

Beat Jeckelmann

IEEE Transactions on Instrumentation and Measurement, 2005

View PDFchevron_right

A 10 V programmable Josephson voltage standard and its applications for voltage metrology

Stephan Schlamminger

Metrologia, 2012

View PDFchevron_right

Measurement setup to characterize electrical standards

Pier Capra

19th International Congress of Metrology (CIM2019), 2019

View PDFchevron_right

A Standardization of The Electrical Metrology Laboratory Competence for DC Voltage Unit

Hadi Sardjono

Jurnal Standardisasi, 2007

View PDFchevron_right

10 V, 1 Ω, 10 kΩ high accuracy standard setup for calibration of multifunction electrical instruments and for inter-laboratory comparisons

Pier Capra

18th International Congress of Metrology, 2017

View PDFchevron_right

Analysis of a National Inter-Laboratory Comparison of High DC Resistance at 10 Mω and 1 Gω Level

Pier Capra

Metrology and Measurement Systems

View PDFchevron_right

High accuracy transportable selectable-Value High Dc Voltage Standard

Roberto Cerri

17th International Congress of Metrology, 2015

View PDFchevron_right

Automated reversing switch and monitor for high accuracy voltage standards

Pier Capra

View PDFchevron_right

Measurement characteristics of voltage in practice and possibilities for improvement of voltage

Alena Otcenasova

Przegląd Elektrotechniczny, 2012

View PDFchevron_right

Comparison of the Josephson voltage standards of the EIM and the BIPM

Irene Flouda

Metrologia, 2010

View PDFchevron_right

An Equipment for Voltage-Transducers Calibration Oriented to the Uncertainty Estimate in DSP-Based Measurements

Renato Sasdelli

IEEE Transactions on Instrumentation and Measurement, 2007

View PDFchevron_right

CCE comparison of AC-DC voltage transfer standards at the lowest attainable level of uncertainty

Manfred Klonz

IEEE Transactions on Instrumentation and Measurement, 1997

View PDFchevron_right

A 10 V Josephson Voltage Standard Comparison Between NIST and INMETRO as a Link to BIPM

Regis Landim

IEEE Transactions on Instrumentation and Measurement, 2000

View PDFchevron_right

Comparison CCEM-K8 of DC voltage ratio: results

Abhishek Mahajan

IEEE Transactions on Instrumentation and Measurement, 2003

View PDFchevron_right

The Evaluation of Expanded Uncertainty of DC Voltages in the Presence of Electromagnetic Interferences using the LabVIEW Environment

Eligiusz Pawłowski

Measurement Science Review

View PDFchevron_right

Traceability of the 10-kΩ standard at IEN

Pier Capra

IEEE Transactions on Instrumentation and Measurement, 2001

View PDFchevron_right

Determination of the frequency dependence of the AC-DC voltage standard at IEN

Umberto Pogliano

IEEE Transactions on Instrumentation and Measurement, 1997

View PDFchevron_right

Analysis of a national low dc resistance inter-laboratories comparison

Pier Capra

16th International Congress of Metrology, 2013

View PDFchevron_right

A comparative analysis of AC/DC transfer standards for comparison of national standards

Valentyn Isaiev

Eastern-European Journal of Enterprise Technologies, 2018

View PDFchevron_right

Direct Comparison of Josephson Voltage Standards at 10 V Between BIPM and CENAM

David Alexander Minguillo Aviles

IEEE Transactions on Instrumentation and Measurement, 2013

View PDFchevron_right

Automated setup to accurately calibrate electrical dc voltage generators

Pier Capra

Measurement, 2018

View PDFchevron_right

Quality Assurance of Voltage Measurement in Multifunction Calibrator as Measurement Standard in National Standardization Agency of Indonesia (SNSU – BSN)

nibras yayienda

Jurnal Penelitian Pendidikan IPA

View PDFchevron_right

Testing of Electrical Energy Meters Subject to Realistic Distorted Voltages and Currents

Roberto Tinarelli

Energies, 2020

View PDFchevron_right