spectrogram — SciPy v1.15.3 Manual (original) (raw)
scipy.signal.
scipy.signal.spectrogram(x, fs=1.0, window=('tukey', 0.25), nperseg=None, noverlap=None, nfft=None, detrend='constant', return_onesided=True, scaling='density', axis=-1, mode='psd')[source]#
Compute a spectrogram with consecutive Fourier transforms (legacy function).
Spectrograms can be used as a way of visualizing the change of a nonstationary signal’s frequency content over time.
Legacy
This function is considered legacy and will no longer receive updates. While we currently have no plans to remove it, we recommend that new code uses more modern alternatives instead. ShortTimeFFT is a newer STFT / ISTFT implementation with more features also including a spectrogram method. A comparison between the implementations can be found in the Short-Time Fourier Transform section of the SciPy User Guide.
Parameters:
xarray_like
Time series of measurement values
fsfloat, optional
Sampling frequency of the x time series. Defaults to 1.0.
windowstr or tuple or array_like, optional
Desired window to use. If window is a string or tuple, it is passed to get_window to generate the window values, which are DFT-even by default. See get_window for a list of windows and required parameters. If window is array_like it will be used directly as the window and its length must be nperseg. Defaults to a Tukey window with shape parameter of 0.25.
npersegint, optional
Length of each segment. Defaults to None, but if window is str or tuple, is set to 256, and if window is array_like, is set to the length of the window.
noverlapint, optional
Number of points to overlap between segments. If None,noverlap = nperseg // 8. Defaults to None.
nfftint, optional
Length of the FFT used, if a zero padded FFT is desired. If_None_, the FFT length is nperseg. Defaults to None.
detrendstr or function or False, optional
Specifies how to detrend each segment. If detrend is a string, it is passed as the type argument to the detrendfunction. If it is a function, it takes a segment and returns a detrended segment. If detrend is False, no detrending is done. Defaults to ‘constant’.
return_onesidedbool, optional
If True, return a one-sided spectrum for real data. If_False_ return a two-sided spectrum. Defaults to True, but for complex data, a two-sided spectrum is always returned.
scaling{ ‘density’, ‘spectrum’ }, optional
Selects between computing the power spectral density (‘density’) where Sxx has units of V**2/Hz and computing the power spectrum (‘spectrum’) where Sxx has units of V**2, if _x_is measured in V and fs is measured in Hz. Defaults to ‘density’.
axisint, optional
Axis along which the spectrogram is computed; the default is over the last axis (i.e. axis=-1).
modestr, optional
Defines what kind of return values are expected. Options are [‘psd’, ‘complex’, ‘magnitude’, ‘angle’, ‘phase’]. ‘complex’ is equivalent to the output of stft with no padding or boundary extension. ‘magnitude’ returns the absolute magnitude of the STFT. ‘angle’ and ‘phase’ return the complex angle of the STFT, with and without unwrapping, respectively.
Returns:
fndarray
Array of sample frequencies.
tndarray
Array of segment times.
Sxxndarray
Spectrogram of x. By default, the last axis of Sxx corresponds to the segment times.
See also
Simple, optionally modified periodogram
Lomb-Scargle periodogram for unevenly sampled data
Power spectral density by Welch’s method.
Cross spectral density by Welch’s method.
Newer STFT/ISTFT implementation providing more features, which also includes a spectrogram method.
Notes
An appropriate amount of overlap will depend on the choice of window and on your requirements. In contrast to welch’s method, where the entire data stream is averaged over, one may wish to use a smaller overlap (or perhaps none at all) when computing a spectrogram, to maintain some statistical independence between individual segments. It is for this reason that the default window is a Tukey window with 1/8th of a window’s length overlap at each end.
Added in version 0.16.0.
References
[1]
Oppenheim, Alan V., Ronald W. Schafer, John R. Buck “Discrete-Time Signal Processing”, Prentice Hall, 1999.
Examples
import numpy as np from scipy import signal from scipy.fft import fftshift import matplotlib.pyplot as plt rng = np.random.default_rng()
Generate a test signal, a 2 Vrms sine wave whose frequency is slowly modulated around 3kHz, corrupted by white noise of exponentially decreasing magnitude sampled at 10 kHz.
fs = 10e3 N = 1e5 amp = 2 * np.sqrt(2) noise_power = 0.01 * fs / 2 time = np.arange(N) / float(fs) mod = 500np.cos(2np.pi0.25time) carrier = amp * np.sin(2np.pi3e3*time + mod) noise = rng.normal(scale=np.sqrt(noise_power), size=time.shape) noise *= np.exp(-time/5) x = carrier + noise
Compute and plot the spectrogram.
f, t, Sxx = signal.spectrogram(x, fs) plt.pcolormesh(t, f, Sxx, shading='gouraud') plt.ylabel('Frequency [Hz]') plt.xlabel('Time [sec]') plt.show()
Note, if using output that is not one sided, then use the following:
f, t, Sxx = signal.spectrogram(x, fs, return_onesided=False) plt.pcolormesh(t, fftshift(f), fftshift(Sxx, axes=0), shading='gouraud') plt.ylabel('Frequency [Hz]') plt.xlabel('Time [sec]') plt.show()
