microlenses (original) (raw)

Definition: optical lenses of particularly small diameter, e.g. below 1 mm

Category: general optics

• lenses
  • achromatic lenses
  • aspheric aspheric
  • ball lenses
  • condensers
  • cylindrical lenses
  • diffractive lenses
  • f–theta lenses
  • fiber lenses
  • field lenses
  • Fresnel lenses
  • gradient-index lenses
  • Kerr lens
  • loupes
  • magnifying glasses
  • microlens arrays
  • microlenses
  • objective lenses
  • ocular lenses
  • rod lenses
  • scanning lenses
  • telecentric lenses
  • zoom lenses
  • (more topics)

Related: microlens arrayslensesaspheric opticsdiffractive opticsgradient-index lensesmicro-optics

Page views in 12 months: 1322

DOI: 10.61835/u93 Cite the article: BibTex BibLaTex plain textHTML Link to this page! LinkedIn

Content quality and neutrality are maintained according to our editorial policy.

📦 For purchasing microlenses, use the RP Photonics Buyer's Guide — an expert-curated directory for finding all relevant suppliers, which also offers advanced purchasing assistance.

Contents

What are Microlenses?

Microlenses (or micro-lenses) are optical lenses with a particularly small-diameter, e.g. below 1 mm. In some cases, they are even much smaller than that, down to the order of a few optical wavelengths. For such small structures, the phenomenon of diffraction starts to play a significant role, often degrading the performance.

Operation Principles of Microlenses

Microlenses can be based on different operation principles:

• Some of them simply work as refractive lenses, just as traditional large lenses. A radially varying change in optical phase, which is the essential function of a lens, is obtained from a radially varying thickness of the device.
• In order to keep the thickness very low despite a substantial dioptric power, one can use the shape of a Fresnel lens, where light is reflected by a set of concentric curved surfaces. However, in contrast to ordinary Fresnel lenses, one would typically dimension the steps to optimize the phase properties.
• Although diffraction is generally considered as detrimental, it is sometimes directly utilized (diffractive optics): there are diffractive microlenses based on diffraction as the basic operation principle. This is possible both with binary structures, having only two different height levels, and with continuous structures.
• Microlenses can also be realized as gradient-index lenses (GRIN lenses). These typically consist of two different transparent layers, where one of them (the substrate layer) has a homogeneous refractive index while the other one has a radially dependent refractive index. A thickness variation is then not needed, but both principles can also be combined.

Fabrication of Microlenses

Relatively large microlenses may be fabricated with similar techniques as traditional lenses, but modified optical fabrication techniques are required for smaller dimensions. Many of them are applied not to single lenses, but to microlens arrays (see below). Some examples:

• Microlens arrays can be made by injection molding or by embossing from some master form. This is done particularly with plastic (polymer) materials.
• There are printing methods, where microdroplets of a liquid polymer material are deposited on a plane surface to form lenslets. They can subsequently be hardened by UV irradiation which causes polymerization.
• Various techniques of photolithography are used for fabricating diffractive microlenses. Some of them can produce only binary structures, where a certain depth of a transparent material is either preserved or completely removed. In some cases, thermal reflow is applied after such a production step to transform step structures into curved lens structures. Some fabrication techniques are similar to those used for semiconductor chip production; this area is called wafer-level optics.
• There are also methods of lithography using ultrafast lasers or alternatively on ultra-precision diamond micro-drilling or diamond turning.

Some of those techniques are for quite high optical quality, and some even allow one to fabricate aspheric lenses.

Microlens Arrays

One can produce microlens arrays of one- or two-dimensional form, containing many microlenses which are usually fabricated together on a common substrate. Two-dimensional microlens arrays can for example have a rectangular or hexagonal pattern of lenses. See the article microlens arrays for more details.

Applications of Microlenses

There is a wide range of applications of microlenses. We begin with some examples of single lenses:

• If a microlens is placed just over the fiber core of an optical fiber, it can function as a fiber collimator or alternatively for launching light into a fiber. Note, however, that the beam radius is severely limited by the size of the lens.
• Similarly, the radiation from a laser diode may be collimated.

Some applications of microlens arrays are:

• A linear lens array can be used for collimating the radiation from all emitters of a diode bar (diode array).
• In integrated optics, lens arrays can be used to collimate the output of arrays of waveguides.
• As explained above, one uses microlens arrays where each lens is aligned with a pixel of a kind of photodetector array. That way, one can increase the sensitivity by reducing the loss of light on non-sensitive areas between the detector pixels. However, lenses in such a configuration cannot perform an imaging function.
• There are also imaging devices based on microlenses, used e.g. for photocopiers and photo cameras for smartphones. Also, one can make lightfield cameras.
• Some lens arrays are used in micro-optic beam homogenizers.
• Shack–Hartmann wavefront sensors can contain microlens arrays. Each lens produces a small beam focus, the position of which is related to the wavefront direction in front of the lens.
• Lens arrays can be used for generating reference beams in the interferometric characterization of large lenses.

Insects and various other animals have used microlenses as essential parts of compound eyes for millions of years.

Suppliers

Sponsored content: The RP Photonics Buyer's Guide contains 23 suppliers for microlenses. Among them:

⚙ hardware

Avantier produces custom micro-lenses from high-index optical glass, which undergo precision polishing to achieve exceptional tolerances. This makes them suitable for mounting in intricate imaging systems.

⚙ hardware

PowerPhotonic offers custom mircolenses and arrays manufactured out of high-quality fused silica. Customisation available includes number of lenses, lenslet shape including freeform shapes, lenslet size and lens prescription.

⚙ hardware

ECOPTIK can fabricate high-precision customized microlenses with a diameter of 1 mm to 10 mm. It can involve a variety of materials in the ultraviolet, visible, and infrared wavebands. Such microlenses are the core components of multiple optical systems and are widely used in medical instruments, optical fiber transmission equipment, micro imaging systems, and so on.

⚙ hardware

We offer microlenses and micro-optics downs to 0.3 mm, available with AR treatment.

⚙ hardware

Shanghai Optics Inc custom micro-lenses are made from high index optical glass. They are precision polished to very high tolerances so that they can be mounted into complex imaging systems.

Bibliography

(Suggest additional literature!)

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.