Morphology and Rheological Characteristics of Lead-Free Sn-3 Ag-0 . 5 Cu ( SAC ) Solder Pastes (original) (raw)

Materials & Design, 2009

Rheological characterization of a solder paste for surface mount applications

Rheologica Acta, 2006

Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process

Emeka Amalu

Materials & Design, 2011

View PDFchevron_right

Wall-slip effects in SnAgCu solder pastes used in electronics assembly applications

Nwachukwu Ekere

2009

View PDFchevron_right

The rheological properties of solder and solar pastes and the effect on stencil printing

Ndy Ekere

Rheologica Acta, 2000

View PDFchevron_right

Flow processes in solder paste during stencil printing for SMT assembly

Intan Ismail

Journal of Materials Science: Materials in Electronics, 1995

View PDFchevron_right

Characterisation of lead-free solder pastes for low cost flip-chip bumping

Ndy Ekere

2002

View PDFchevron_right

Measurements of solder paste viscosity during its tempering and aging

Ivana Pelikanova

Proceedings of the 2014 37th International Spring Seminar on Electronics Technology, 2014

View PDFchevron_right

Size Matters-The Effects of Solder Powder Size on Solder Paste Performance

Tony Facusse Lentz

2019

View PDFchevron_right

Effect of flux functional group for solder paste formulation towards soldering quality of SAC305/CNT/Cu

roslina_i staff

Soldering & Surface Mount Technology, 2020

View PDFchevron_right

A study of SnAgCu solder paste transfer efficiency and effects of optimal reflow profile on solder deposits

Raj Bhatti, Emeka Amalu, G. Takyi

Microelectronic Engineering, 2011

View PDFchevron_right

Stencil printing behavior of lead-free Sn-3Ag-0.5Cu solder paste for wafer level bumping for Sub-100 μm size solder bumps

Ndy Ekere

Metals and Materials International, 2013

View PDFchevron_right

Effect of Temperature on Solder Paste During Surface Mount Technology Printing

sharizal aziz

2020

View PDFchevron_right

Defect minimization and process improvement in SMT lead-free solder paste printing: a comparative study

ali aman

Soldering & Surface Mount Technology, 2019

View PDFchevron_right

Effect of Abandon Time on Print Quality and Rheological Characteristics for Lead-Free Solder Pastes used for Flip-Chip Assembly

Ndy Ekere

2007

View PDFchevron_right

Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly

Rajkumar a/l Durairaj

Journal of Materials Processing Technology, 2009

View PDFchevron_right

Using Rheology Measurement as a Potentially Predictive Tool for Solder Paste Transfer Efficiency and Print Volume Consistency

Karen Tellefsen

2016

View PDFchevron_right

Investigation of wall-slip effect on lead-free solder paste and isotropic conductive adhesives

Rajkumar a/l Durairaj

Sadhana, 2009

View PDFchevron_right

Stencil printing process performance on various aperture size and optimization for lead-free solder paste

MOHD SYAKIRIN RUSDI

The International Journal of Advanced Manufacturing Technology, 2019

View PDFchevron_right

Dispelling the Black Magic of Solder Paste

Tony Facusse Lentz

2015

View PDFchevron_right

Morphology and Shear Strength of Lead-Free Solder Joints with Sn3.0Ag0.5Cu Solder Paste Reinforced with Ceramic Nanoparticles

Naďa Beronská

Journal of Electronic Materials, 2016

View PDFchevron_right

Microstructure and mechanical properties of lead-free Sn-Cu-Ni composite solder paste reinforced with silicon (Si) particles

norainiza saud

AIP Conference Proceedings, 2017

View PDFchevron_right

Viscoelastic properties of solder pastes

Romano Lapasin

Journal of Electronic Materials, 1998

View PDFchevron_right

Innovations in Soldering Materials and Optimization of Solder Paste Printing and Inspection Parameters for System-in-Package Assembly

david Sbiroli

IMAPSource Proceedings

View PDFchevron_right

Leaded and Lead-Free Solder Paste Evaluation Screening Procedure

Ronald C. Lasky

2007

View PDFchevron_right

Effects of addition of copper particles of different size to Sn-3.5Ag solder

Haseeb ASMA

Journal of Materials Science-Materials in Electronics, 2012

View PDFchevron_right

Effect of SiC Particles Addition on the Wettability and Intermetallic Compound Layer Formation of Sn-Cu-Ni (SN100C) Solder Paste

izrul Izwan

Applied Mechanics and Materials, 2015

View PDFchevron_right

Soldering of Passive Components Using Sn Nanoparticle Reinforced Solder Paste: Influence on Microstructure and Joint Strength

Maen Sari

Nanomaterials

View PDFchevron_right

Design and Properties of New Lead-Free Solder Joints Using Sn-3.5Ag-Cu Solder

Mohammed Gumaan

Silicon, 2018

View PDFchevron_right

Understanding the process window for printing lead-free solder pastes

Rajkumar a/l Durairaj

IEEE Transactions on Electronics Packaging Manufacturing, 2001

View PDFchevron_right

Reliability Study of Solder Paste Alloy for the Improvement of Solder Joint at Surface Mount Fine-Pitch Components

Raden Achmad Chairdino Leuveano

Materials, 2014

View PDFchevron_right

An Investigation of TiO2Addition on Microstructure Evolution of Sn-Cu-Ni Solder Paste Composite

Mohd Nazree Derman

MATEC Web of Conferences, 2016

View PDFchevron_right

Morphology and Rheological Characteristics of Lead-Free Sn-3 Ag-0 . 5 Cu ( SAC ) Solder Pastes (original) (raw)

Related papers