Tolerance and biosorption of copper (Cu) and lead (Pb) by filamentous fungi isolated from a freshwater ecosystem (original) (raw)
Related papers
Biosorption and Bioaccumulation of Copper and Lead by Heavy Metal-Resistant Fungal Isolates
Arabian Journal for Science and Engineering, 2015
Microorganisms play an important role in the bioremediation of heavy metal-contaminated wastewater and soil. In this research, isolation of heavy metal-resistant fungi was carried out from wastewater-treated soil samples of Hudiara drain, Lahore. The purpose of the present investigation was to observe fungal absorption behavior toward heavy metal. The optimum pH and temperature conditions for heavy metal removal were determined for highly tolerant isolates of Aspergillus spp. along with the initial metal concentration and contact time. Biosorption capacity of A. flavus and A. niger was checked against Cu(II) and Pb(II), respectively. The optimal pH was 8-9 for A. flavus and 4-5.4 for A. niger, whereas optimal temperature was 26 and 37 • C, respectively. Moreover, the biosorption capacity of A. flavus was 20.75-93.65 mg g −1 for Cu(II) with initial concentration 200-1400 ppm. On the other hand, biosorption capacity of A. niger for Pb(II) ranged from 3.25 to 172.25 mg g −1 with the same range of initial metal concentration. It was also found that equilibrium was maintained after maximum adsorption. The adsorption data were then fitted to Langmuir model with a coefficient of determination >0.90. The knowledge of the present study will be helpful for further research on the bioremediation of polluted soil.
Biosorption of Copper and Lead by Heavy Metal Resistant Fungal Isolates
Microorganisms play a significant role in bioremediation of heavy metal contaminated soil and wastewater. In this study heavy metal resistant fungi were isolated from the waste water treated soil samples of Hudiara drain, Lahore. The optimum pH and temperature conditions for heavy metal removal were determined for highly tolerant isolates of Aspergillus species along with the initial metal concentration and contact time. Biosorption capacity of Aspergillus flavus and Aspergillus niger was checked against Cu (II) and Pb (II) respectively. The optimal pH was 8-9 for A. flavus and 4-5.4 for A. niger, whereas the optimal temperature was 26°C and 37°C respectively. Moreover, the biosorption capacity of A. flavus was 20.75-93.65 mg/g for Cu (II) with initial concentration 200-1400 ppm. On the other hand the biosorption capacity of A. niger for Pb (II) ranged from 3.25-172.25 mg/g with the same range of initial metal concentration. It was also found that equilibrium was maintained after maximum adsorption.
Environmental Technology & Innovation, 2021
Due to various anthropogenic activities, different heavy metals like arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), mercury (Hg) and nickel (Ni) accumulate in the soils of industrial areas. In the current study, contaminated soil was collected from Yuepu industrial area of Shanghai, China. Soil analysis revealed the presence of Pb and Cu in high concentrations, ranging from 125.9-128.0 mg/kg and 98.4-100.2 mg/kg, respectively. These soil samples were further used to isolate metal tolerant microbes. Subsequent screening resulted in the isolation of four major fungal species including Fusarium fujikuroi, Fusarium solani, Trichoderma citronoviridae and Trichoderma reesei. Molecular characterization of isolated fungi was performed and amplified sequences were deposited in GenBank NCBI database. Metal tolerance and biosorption capacity of these fungal strains towards lead and copper were tested. Fungal strains were exposed to increasing concentrations (100-1000 ppm) of chlorides of lead and copper and the tolerance of the selected fungi was evaluated by measuring the minimum inhibitory concentrations (MIC). The range of MIC values was found to be 400 ppm to 1000 ppm. The tolerance index of all the tested fungi was calculated and T. citronoviridae was observed to be tolerant at 1 mM concentration of lead while F. solani was the most tolerant species at 1 mM concentration of copper. The highest biosorption capacity of Pb was exhibited by T. citronoviridae, while T. reesei showed the best absorption capacity of Cu followed by F. solani. Scanning electron microscopy (SEM) showed visible adsorption of metal on fungal mycelia and suggested it to be the mechanism of metal removal. On the basis of these findings, it could be concluded that T. citronoviridae and F. solani are the potential mycoremediation microbes in Pb and Cu contaminated soils, respectively.
Bioresource Technology, 2007
Heavy metal analysis of agricultural field soil receiving long-term (>20 years) application of municipal and industrial wastewater showed two-to five-fold accumulation of certain heavy metals as compared to untreated soil. Metal-resistant fungi isolated from wastewater-treated soil belonged to genera Aspergillus, Penicillium, Alternaria, Geotrichum, Fusarium, Rhizopus, Monilia and Trichoderma. Minimum inhibitory concentrations (MIC) for Cd, Ni, Cr, Cu, and Co were determined. The MIC ranged from 0.2 to 5 mg ml À1 for Cd, followed by Ni (0.1-4 mg ml À1 ), Cr (0.3-7 mg ml À1 ), Cu (0.6-9 mg ml À1 ) and for Co (0.1-5 mg ml À1 ) depending on the isolate.
Biosorption of heavy metal polluted soil using bacteria and fungi isolated from soil
SN Applied Sciences, 2019
Heavy metals polluted soils have turned out to be a common environmental problem across the globe due to their toxic effects and accumulation through the food chain. Heavy metals have lethal effects on all forms of life. For instance, plants grown on heavy metal polluted soil show a reduction in growth and yields. A surge in anthropogenic activities and industrial operations has substantially increased the level of heavy metal pollution and release into the environment; hence, there is need to remediate these heavy metal pollutants. Biosorption is an efficient, economical, ecofriendly and convenient techniques of remediating heavy metal polluted soils. It is a widely accepted method that utilizes biomaterials such as natural biomass as biosorbents. The current study was based on the biosorption of copper, chromium, cadmium and nickel polluted soil using bacteria and fungi isolated from soil. Bacterial species isolated were Pseudomonas, Bacillus, Micrococcus, Escherichia, Streptococcus, Enterobacter and Staphylococcus while fungi isolated were Aspergillus niger, Penicillium notatum and Aspergillus flavus. The isolated bacteria were screened for potential to biosorb copper and chromium likewise fungi for cadmium and nickel. Biosorption rate was determined using atomic absorption spectrophotometry. Five milliliters each of a-day-old culture of the screened bacteria and fungi was inoculated into 45 ml of nutrient broth (bacteria) and potato dextrose broth (fungi) having concentrations of 5, 10, 15 and 20 ppm, respectively, of copper, chromium, cadmium and nickel. The conical flasks were incubated at a temperature of 37 °C and 28 °C ± 2 for bacteria and fungi, respectively, for a period of 35 days of inoculation. For the bacterial isolates, the highest biosorption rates of chromium (89.67%) and copper (90.89%) by Pseudomonas aeruginosa were observed at 20 ppm on day 21 and 15 ppm on day 14, respectively, while for the fungi isolates, P. notatum showed highest biosorption rate for cadmium at 10 ppm with 77.67%. Aspergillus niger showed highest biosorption rate for nickel with 81.07% after 28 days of incubation. The results of this study revealed the ability of Pseudomonas aeruginosa to biosorb copper and chromium and also A. niger and P. notatum to biosorb cadmium and nickel from the environment and can be developed for the biosorption of soils polluted with copper, chromium, cadmium and nickel.
Biosorption of Cadmium by Filamentous Fungi Isolated from Coastal Water and Sediments
Journal of Toxicology, 2018
The use of microorganisms in decontaminating the environment encumbered with heavy metal pollutants through biosorption is considered as a good option for bioremediation. This study was conducted to isolate Cadmium (Cd) tolerant fungi from coastal waters and sediments, compare their biosorption capabilities, and identify the isolates with the highest Cd uptake. Water and sediment samples were collected near the effluent sites of industrial belt in Ibo, Lapu-lapu City, Cebu, Philippines. Potato dextrose agar (PDA) plates containing Cd (25, 50, 75, and 100 ppm) were used to isolate Cd tolerant fungi from the samples. The distinct colonies that grew on the highest Cd concentration (100 ppm) were then isolated into pure cultures. The pure cultures of Cd tolerant fungi served as a source of inocula for in vitro biosorption assay using Cd dissolved in potato dextrose broth (PDB) as the substrate. Cd tolerant fungal isolates with the highest Cd uptake were finally identified up to the lowe...
2021
The ability to tolerate high concentrations of heavy metals is one important characteristic of organisms that can be used for bioremediation. In this study, the heavy metal tolerance of filamentous fungi isolated from the VSU wastewater settlement pond was investigated. Specifically, the research was done to determine the Cd, Cu, Fe and Zn in the sediments of the pond, isolate and identify filamentous fungi from these sediments, identify the most tolerant isolate, and determine the minimum inhibitory concentration of heavy metals to the identified isolate. Isolation of filamentous fungi from a composite of eight sediment samples was done through serial dilution and plating using Potato Dextrose Agar (PDA). Isolates were then purified using Sabouraud Dextrose Agar (SDA). Colony and microscopic characteristics of the isolates were used to identify the isolates to genus level only. The tolerance of the isolates to Cd, Cu, Fe, and Zn were then compared through analysis of their toleranc...
Recent Advances in Biosorption of Copper and Cobalt by Filamentous Fungi
Frontiers in Microbiology
Copper (Cu) and Cobalt (Co) are among the most toxic heavy metals from mining and other industrial activities. Both are known to pose serious environmental concerns, particularly to water resources, if not properly treated. In recent years several filamentous fungal strains have been isolated, identified and assessed for their heavy metal biosorption capacity for potential application in bioremediation of Cu and Co wastes. Despite the growing interest in heavy metal removal by filamentous fungi, their exploitation faces numerous challenges such as finding suitable candidates for biosorption. Based on current findings, various strains of filamentous fungi have high metal uptake capacity, particularly for Cu and Co. Several works indicate that Trichoderma, Penicillium, and Aspergillus species have higher Cu and Co biosorption capacity compared to other fungal species such as Geotrichum, Monilia, and Fusarium. It is believed that far more fungal species with even higher biosorption cap...
Ecology, Environment and Conservation, 2022
Heavy metals impose a severe environmental and public health hazard because of their toxic effects and their ability to incorporate in terrestrial and aquatic food chains. Biosorption has many disadvantages over conventional technologies in significant metal removal performance from large volumes of effluents. Fungal biosorption can effectively be used for the removal of metals from contaminated water and soil. Heavy metal tolerant fungal species were isolated from the polluted sites and the most tolerant fungal strain FI-01 was selected. The FI-01 strain was identified as Penicillium chrysogenum on the basis of morphological and microscopic characterization. The live (active) and dead (inactive) biomass was prepared for biosorption assay. The operating parameters viz., pH, temperature and initial metal ion concentration was optimized to 5.0, 35°C and 100 mg/l for maximum biosorption. The dead biomass has shown 23.2 percent more biosorption capacity. The biosorption data of dead biomass shows good fit with the Freundlich adsorption isotherm.
Journal of Applied Sciences and Environmental Management, 2005
Two isolates belonging to the predominant genera Aspergillus and Rhizopus isolated from agricultural field treated with sewage/ industrial effluents were selected for the biosorption potential evaluation of Cr and Cd. Pretreated, dead biomass of above fungi was used for bioadsorption experiment at pH value 4.5 with the biomass, 1-5 mg in a 100 ml metal solution of different concentration (2, 4, 6 and 8 mM) with a contact time of 18 hrs and agitation, 120 rpm. Bioadsorption of Cr ranged from 6.20-9.5 mg/g of dry mass at one or other initial metal concentrations by Aspergillus and Rhizopus sp. The bioadsorption of Cd was ranged from 2.3-8.21 mg/g. On the comparative basis Rhizopus sp. could bioadsorbed higher concentration of both metals as compared to Aspergillus sp. Bioadsorption of Cd and Cr was influenced by initial metal concentration and nature of organism. The findings revealed that fungi of metal polluted sites showed higher metal tolerance and bioadsorption capacity of chromium and cadmium. @JASEM