Cadaver Research Papers - Academia.edu (original) (raw)

INTRODUCTION Nourishment for the brain, a highly vascular organ, is derived from a unique structure called the 'circle of Willis', which is formed by the terminal branches of the internal carotid arteries (ICAs) and basilar... more

INTRODUCTION Nourishment for the brain, a highly vascular organ, is derived from a unique structure called the 'circle of Willis', which is formed by the terminal branches of the internal carotid arteries (ICAs) and basilar arteries (BAs). The circle of Willis forms an anastomotic link between the carotid and vertebrobasilar systems in the arterial supply of the brain, while the BA forms an important component of the brain's posterior circulation and supplies its many vital parts. METHODS A study was performed on 20 brain specimens used for routine dissections at the Anatomy Department, Kasturba Medical College, in order to examine the morphology of BAs in the brain. RESULTS In most specimens, the position of the termination of BA was normal, although variations were present in the mode of termination. In one specimen, the BA terminated by dividing into two superior cerebellar arteries. The posterior cerebral arteries (PCAs) arose from ICAs on both sides in this specimen...

Autologous fascial and synthetic materials have been widely used to repair the stress form of urinary incontinence (SUI) as well as pelvic floor prolapse. The safety and long-term durability of cadaveric fascia lata in orthopedic and... more

Autologous fascial and synthetic materials have been widely used to repair the stress form of urinary incontinence (SUI) as well as pelvic floor prolapse. The safety and long-term durability of cadaveric fascia lata in orthopedic and ophthalmologic surgery have encouraged urogynecologists to use this material for a sling material. The rationale of placement of a sling from cadaveric fascia lata

PURPOSE: The Visible Human Projects, which were launched in the United States, have also been developed in Korea and China during the past decade. This article includes the new trials to promote a variety of their applications. METHODS:... more

PURPOSE: The Visible Human Projects, which were launched in the United States, have also been developed in Korea and China during the past decade. This article includes the new trials to promote a variety of their applications. METHODS: In a Korean laboratory, whole bodies of two cadavers were serially sectioned (Visible Korean), while two Chinese institutes have sectioned nine cadavers (Chinese Visible Human and Virtual Chinese Human). For acquiring sectioned images and stereoscopic models of better quality, appropriate cadavers were chosen; equipments and techniques for embedding, sectioning, photography, and computer processing were continuously improved in the two countries. To facilitate the research, Korean and Chinese scientists have visited each other. RESULTS: The sectioned images with thinner intervals (0.2 mm or less) and higher resolution were obtained. From the advanced data, the segmented images of comprehensive structures were prepared to construct three-dimensional m...

Sigmoid volvulus demonstrates geographical, racial, and gender variation. This autopsy study was undertaken to establish morphological differences of the sigmoid colon and its mesocolon in which the length and other characteristics were... more

Sigmoid volvulus demonstrates geographical, racial, and gender variation. This autopsy study was undertaken to establish morphological differences of the sigmoid colon and its mesocolon in which the length and other characteristics were assessed. A total of 590 cadavers were examined (403 African, 91 Indian, and 96 White). Length and height of the sigmoid colon and mesocolon were significantly longer in Africans, and mesocolon root was significantly narrower in Africans. Mesocolic ratio for Africans, Indians, and Whites was 1.1 ± 0.8, 1.8 ± 0.7, and 1.9 ± 1.0, respectively. Africans had a significantly high incidence of redundant sigmoid colon with the long-narrow type and suprapelvic position predominating (P = 0.003); the opposite applied to the classic type. There was no difference in sigmoid colon length, mesocolon height, and width between males and females in all population groups. Among Africans, the long-narrow type was more common in males, and the classic and long-broad types were more common in females. Splaying of teniae coli and thickening of the mesentery were more common in Africans. Tethering of the sigmoid colon to the posterior abdominal wall was less common in Africans compared with other population groups. In conclusion, the sigmoid colon was longer, and the sigmoid mesocolon root was narrower in Africans compared with the other population groups, and the sigmoid colon had a suprapelvic disposition among Africans. In Africans, the sigmoid colon was longer in males with a long-narrow shape. These differences may explain geographical and racial differences in sigmoid volvulus.

During growth the mandible accommodates increases in biomechanical loading resulting from changes in the function of structures of the oral cavity. Biomechanical loads are thought to play an intricate and vital role in the modelling and... more

During growth the mandible accommodates increases in biomechanical loading resulting from changes in the function of structures of the oral cavity. Biomechanical loads are thought to play an intricate and vital role in the modelling and remodelling of bone, with site-specific effects on bone mineral density. It is anticipated that the effects of this loading on bone mineral density are intensified during the functional transition from prenatal to postnatal stages. The aim of this study was thus to evaluate changes in bone mineral density across the body of the immature human mandible during the early stages of dental development. The study sample included 45 human mandibles, subdivided into three age groups: prenatal (30 gestational weeks to birth; n = 15); early postnatal (birth to 12 months; n = 18); and late postnatal (1-5 years; n = 12). Mandibles were scanned using X-ray micro-computed tomography. Eight landmarks were selected along the buccal/labial and lingual surfaces of eac...

RefDoc Bienvenue - Welcome. Refdoc est un service / is powered by. ...

Impingement by the distal fascicle of the anterior inferior tibiofibular ligament (AITFL) is a relatively new entity among the known causes of anterolateral impingement syndromes of the ankle. This study investigated the anatomy of the... more

Impingement by the distal fascicle of the anterior inferior tibiofibular ligament (AITFL) is a relatively new entity among the known causes of anterolateral impingement syndromes of the ankle. This study investigated the anatomy of the anterior inferior tibiofibular ligament and its possible role in talar impingement in 47 ankles of 27 cadavers. The length, width, insertion point to the fibula and the interactions with talus were noted, as was the relationship of the fascicle and talus during different ankle movements before and after incision of the lateral ligaments. A distal fascicle of the AITFL was found in 39 of the 47 ankles (83%) and appeared as a single-complete ligament in the remaining 8 ankles (17%). The fascicle averaged 16.1±2.94 mm in length (range 10–21) and 4.2±1.00 mm in width (range, 3–7). The insertion point of the fascicle on the fibula averaged 10.3±2.27 mm (5–13) distal to the joint level. Contact between the ligament and the lateral dome of the talus was observed in 42 specimens (89.3%). Bending of the fascicle was observed in 8 of these 42 ankles with forced dorsiflexion. These 8 specimens were significantly wider and longer than the specimens without bending of the fascicle. Incision of the anterior talofibular ligament led to bending in dorsiflexion in additional 11 ankles. The total 19 fascicles with bending after incision of the anterior talofibular ligament were significantly longer and inserted more distally than the remaining 20 fascisles without bending. Manual traction simulating distraction during arthroscopic procedures relieved the contact. These findings show that the presence of the distal fascicle of the AITFL and its contact with the talus is a normal finding. However, it may become pathological due to anatomical variations and/or instability of the ankle resulting from torn lateral ligaments. When observed during an ankle arthroscopy, the surgeon should look for the criteria described in the present study to decide whether it is pathological and needs to be resected.

The present study measured the position of the greater palatine foramen relative to adjacent anatomical landmarks in Brazilian skulls. The perpendicular distance of the greater palatine foramen to the midline maxillary suture in Brazilian... more

The present study measured the position of the greater palatine foramen relative to adjacent anatomical landmarks in Brazilian skulls. The perpendicular distance of the greater palatine foramen to the midline maxillary suture in Brazilian skulls was about 14 mm and the distance of greater palatine foramen to the incisive foramen was approximately 36 mm. The distance of greater palatine foramen to the posterior border of the hard palate was approximately 3 mm, and the mean angle between the midline maxillary suture and the line from the incisive foramen and the greater palatine foramen was 22.71 degrees . In almost 70% of the cases, the greater palatine foramen opened in an anterior direction. The mean palatine length was approximately 52 mm. In the greater majority of the skulls (93.81%), the greater palatine foramina were opposite or distal to the maxillary third molar. These data will be helpful in comparing these skulls to those from various other regions as well as comparing sku...

Satisfactory analgesia cannot be achieved in every obturator nerve block. To attempt to improve the success rate of obturator nerve block, this study describes the detailed anatomy of the obturator region and canal. Eleven (5 female and 6... more

Satisfactory analgesia cannot be achieved in every obturator nerve block. To attempt to improve the success rate of obturator nerve block, this study describes the detailed anatomy of the obturator region and canal. Eleven (5 female and 6 male) cadavers, totally 22 sides were dissected. Anatomical positions of the structures entering and leaving the canal were defined. The position of the obturator nerve and its branches and their relation with the obturator artery, vein, and with the internal iliac and femoral veins were investigated. A mould of the canal and a model were created. Detailed measurements were performed on the cadavers and models. The obturator canal was in the shape of a funnel compressed from superior to inferior, with anterior and posterior openings. At the entrance of the canal, the nerve lay superiorly; the artery was in the middle, and the vein lay inferiorly. The obturator nerve ran close to the lateral wall of the obturator canal. The distance of lateral wall of obturator canal to the median plane was 41.4 ± 1.1 mm. After leaving the canal, the nerve lay laterally while the anterior branch of the artery was medial. A venous plexus lay between the two structures. The presence of the branches of the obturator artery and vein alongside the obturator nerve may increase the risk of injury to these structures during anaesthetic procedures. The anterior division of the obturator nerve has a close relationship with these vessels. To provide complete analgesia, the obturator nerve should be blocked in the obturator canal or at its external orifice.

Although surgical repair has been reported to provide improved outcomes compared with nonoperative treatment in the management of complete proximal hamstring origin avulsions, no intact or avulsion repair biomechanical data exist to... more

Although surgical repair has been reported to provide improved outcomes compared with nonoperative treatment in the management of complete proximal hamstring origin avulsions, no intact or avulsion repair biomechanical data exist to support various repair strategies or guide postoperative rehabilitation. To compare failure load among 4 proximal hamstring tendon conditions: (1) intact, (2) repair with 2 small anchors (2S), (3) repair with 2 large anchors (2L), and (4) repair with 5 small anchors (5S). Controlled laboratory study. Twenty-four human cadaveric hemipelvises were randomly allocated to 1 of the 4 testing groups. Intact and repaired specimens were subjected to cyclic loading at 1 Hz between 25 N and a progressively increasing maximum load that was incremented by 200 N every 50 cycles, beginning at 200 N and increasing to 1600 N. Displacement, maximum load, stiffness, number of cycles to failure, and mode of failure during cyclic loading were recorded and analyzed. The intac...

OBJECT Surgical transposition of the ulnar nerve to alleviate entrapment may cause otherwise normal structures to become new sources of nerve compression. Recurrent or persistent neuropathy after anterior transposition is commonly... more

OBJECT Surgical transposition of the ulnar nerve to alleviate entrapment may cause otherwise normal structures to become new sources of nerve compression. Recurrent or persistent neuropathy after anterior transposition is commonly attributable to a new distal compression. The authors sought to clarify the anatomical relationship of the ulnar nerve to the common aponeurosis of the humeral head of the flexor carpi ulnaris (FCU) and flexor digitorum superficialis (FDS) muscles following anterior transposition of the nerve. METHODS The intermuscular septa of the proximal forearm were explored in 26 fresh cadaveric specimens. The fibrous septa and common aponeurotic insertions of the flexor-pronator muscle mass were evaluated in relation to the ulnar nerve, with particular attention to the effect of transposition upon the nerve in this region. RESULTS An intermuscular aponeurosis associated with the FCU and FDS muscles was present in all specimens. Transposition consistently resulted in ...

OBJECTIVE: Delineate the relationships among the optic nerve (CN II), the sphenoid sinus, and the sphenoethmoid cell. STUDY DESIGN: High-resolution CT scans of 64 frozen human cadavers were obtained on a Siemens VolumeZoom CT scanner... more

OBJECTIVE: Delineate the relationships among the optic nerve (CN II), the sphenoid sinus, and the sphenoethmoid cell. STUDY DESIGN: High-resolution CT scans of 64 frozen human cadavers were obtained on a Siemens VolumeZoom CT scanner (Munich, Germany) and transferred to a CBYON Suite Doctor Station version 2.6 (CBYON, Mountain View CA) for standardized review. RESULTS: Pneumatization around CN II was categorized into 5 types: no adjacent pneumatization (type 0), pneumatization adjacent to CN II (type 1), adjacent pneumatization with indentation (type 2), pneumatization of <50% CN II circumference (type 3), and pneumatization of >50% CN II circumference (type 4). The prevalence of types 0 to 4 CN II position relative to the sphenoid sinus was 4.7%, 25.8%, 39.8%, 14.1%, and 15.6%, respectively. The prevalence of sphenoethmoid cells was 28.1%. The prevalences of types 0, 1, 2, 3, and 4 CN II positions relative to the sphenoethmoid cell was 5.6%, 58.3%, 25%, 2.8%, and 8.3% respect...

Reverse total shoulder arthroplasty (RTSA) is widely used; however, the effects of RTSA geometric parameters on joint and muscle loading, which strongly influence implant survivorship and long-term function, are not well understood. By... more

Reverse total shoulder arthroplasty (RTSA) is widely used; however, the effects of RTSA geometric parameters on joint and muscle loading, which strongly influence implant survivorship and long-term function, are not well understood. By investigating these parameters, it should be possible to objectively optimize RTSA design and implantation technique. The purposes of this study were to evaluate the effect of RTSA implant design parameters on (1) the deltoid muscle forces required to produce abduction, and (2) the magnitude of joint load and (3) the loading angle throughout this motion. We also sought to determine how these parameters interacted. Seven cadaveric shoulders were tested using a muscle load-driven in vitro simulator to achieve repeatable motions. The effects of three implant parameters-humeral lateralization (0, 5, 10 mm), polyethylene thickness (3, 6, 9 mm), and glenosphere lateralization (0, 5, 10 mm)-were assessed for the three outcomes: deltoid muscle force required ...

Most authors agree that anatomic reduction is the key to optimal results in treatment of injuries of the Lisfranc joint; a few controversies remain. One controversy is the identification of the strongest ligament of the second... more

Most authors agree that anatomic reduction is the key to optimal results in treatment of injuries of the Lisfranc joint; a few controversies remain. One controversy is the identification of the strongest ligament of the second metatarsal-medial cuneiform articulation-the critical ligament of the Lisfranc joint. The purpose of this study is to objectively quantify the cross-sectional area of each ligament of this crucial joint. Twenty cadaveric feet were dissected to isolate the second metatarsal-medial cuneiform articulation. The point of maximum thickness, height, and width of the dorsal, plantar, and interosseous ligaments were measured using handheld calipers at the second metatarsal attachment. The distribution failed to pass Mauchly's test of sphericity, so the Greenhouse-Geisser method was used to assess differences in the height and width to a P <or= .05 level of significance. There was a significant difference in the height, width, and area between all ligaments (P &l...

The purpose of our study was to clarify the events that take place during anterior cruciate ligament (ACL) failure, focusing on the behavior of the ACL as a composition of multiple fibers, during uniaxial tension along the ligament.Ten... more

The purpose of our study was to clarify the events that take place during anterior cruciate ligament (ACL) failure, focusing on the behavior of the ACL as a composition of multiple fibers, during uniaxial tension along the ligament.Ten fresh-frozen human cadaveric knee specimens were fixed in an Instron machine (Instron, Norwood, MA), and load was applied parallel to the ACL axis. Two cameras were used to detect the failure mode of the ACL and its different groups of fibers. The distinct bundles of fibers were marked in each specimen before testing. The macroscopic findings during the experiment were used for comparison with the biomechanical results.The ACL showed a non-monotonic response during testing. The load-elongation curve showed a plateau or a second peak after the initial drop in load. Macroscopically, some fibers were failing initially, whereas the intact fibers had a remaining load potential. In our setting, 3 different failure patterns were recognized, specifically, a midsubstance tear of the anteromedial or the posterolateral bundle with a subsequent failure of the intact bundle or an initial avulsion of the anteromedial attachment. Analysis of the video frames showed a direct connection between the failure patterns in the load-elongation curves and the macroscopic sequence of events during ACL failure.The ACL ligament acts as a multifiber construction. In our setting, rupture follows 3 specific patterns where a complete or partial tear of the fiber bundles occurs first and the remaining intact fiber bundles have a potential load resistance.Our study allows a better understanding of the mechanical properties of the ACL. An update on the biomechanics of ACL failure during uniaxial tension after the “double-bundle revolution” could provide data helpful for ACL reconstruction.