silica fibers (original) (raw)

Definition: optical fibers based on fused silica or related materials

Categories: optical materials, fiber optics and waveguides

• fiber optics
  • fibers
    * passive fibers
    * active fibers
    * step-index fibers
    * graded-index fibers
    * polarization-maintaining fibers
    * photonic crystal fibers
    * photonic bandgap fibers
    * hollow-core fibers
    * multi-core fibers
    * nanofibers
    * single-mode fibers
    * single-polarization fibers
    * few-mode fibers
    * multimode fibers
    * large-core fibers
    * large mode area fibers
    * tapered fibers
    * mid-infrared fibers
    * dispersion-engineered fibers
    * telecom fibers
    * silica fibers
    * fluoride fibers
    * single-crystal fibers
    * plastic optical fibers
    * specialty fibers
    * (more topics)

Related: Telecom Fiber With Parabolic Index Profilefiberstelecom fibersrare-earth-doped fibersfiber opticsphotodarkeningphotonic crystal fibersoptical fiber communicationsfluoride fibersoptical glasses

Page views in 12 months: 1667

DOI: 10.61835/ai3 Cite the article: BibTex BibLaTex plain textHTML Link to this page! LinkedIn

Content quality and neutrality are maintained according to our editorial policy.

📦 For purchasing silica fibers, use the RP Photonics Buyer's Guide — an expert-curated directory for finding all relevant suppliers, which also offers advanced purchasing assistance.

What are Silica Fibers?

Optical fibers are long and flexible kinds of optical waveguides. They are essentially always based either on some glass or on polymers (plastic optical fibers). Among the glasses, fused silica (amorphous silicon dioxide, SiO2) is the primary base material in fiber optics (particularly for optical fiber communications, → telecom fibers) because it has a number of very favorable properties:

• Silica has a wide wavelength range with good optical transparency. In the near-infrared spectral region, particularly around 1.5 μm wavelength, silica can have extremely low absorption and scattering losses of the order of 0.2 dB/km (see Figure 1), when the fiber preform is fabricated in very pure form with certain methods (→ fiber fabrication). Whereas a high transparency in the 1.4-μm region is achieved by keeping the concentration of hydroxyl groups (OH) low, a high OH concentration is better for good transparency in the ultraviolet region. For wavelength from ≈1.8 μm on, the multiphonon absorption leads to steeply rising absorption (infrared absorption edge).
• Initial silica fibers in the 1970s had far higher transmission losses on the order of 20 dB/km, but optimized production process and fiber designs lead to dramatic improvements, so that finally the fundamental physical limit was approached.
• Silica can be drawn into fibers at reasonably high temperatures, and has a conveniently broad glass transition (a relatively shallow viscosity curve).
• Cleaving and fusion splicing of silica fibers works fairly well.
• A silica fiber has an amazingly high mechanical strength against pulling and even bending, provided that the fiber is not too thick and that the surfaces are well prepared. The mechanical strength of a fiber can be further improved with a suitable polymer jacket. Even simple cleaving (breaking) of silica fiber ends can provide nicely flat surfaces with sufficient optical quality.
• Silica is chemically rather stable. In particular, it is relatively resistant to water, even though humidity can cause a gradual degradation (“corrosion”), particularly at elevated temperatures; that can significantly reduce its failure stress limit. Problems may arise from hydrogen darkening, e.g. for fiber-optic sensors in oil and gas wells. In such cases, additional protective coatings may be required.
• Silica glass can be doped with various materials to improve various properties. One purpose of doping can be to raise the refractive index (e.g. with GeO2 or Al2O3) or to lower it (e.g. with fluorine or B2O3). Doping is also possible with laser-active ions (→ rare-earth-doped fibers) to obtain active fibers, to be used e.g. in fiber amplifiers or fiber lasers. The fiber core and sometimes the fiber cladding are doped, so that the material is effectively e.g. an aluminosilicate, germanosilicate, phosphosilicate or borosilicate glass (→ silicate glasses). Particularly for active fibers, pure silica is usually not a very suitable host glass because it exhibits a low solubility for rare earth ions. This leads to quenching effects due to clustering of dopant ions, even for moderate doping concentrations. Aluminosilicates are much better in this respect.
• Silica has a high damage threshold, i.e., a low tendency for phenomena such as laser-induced breakdown. This is important for, e.g., fiber amplifiers when applied for the amplification of short pulses.
• Silica has a particularly low Kerr nonlinearity, which is beneficial in many cases where nonlinear effects can be detrimental. Nevertheless, silica can be quite suitable for exploiting the Kerr effect since the ratio of ($ \chi^{(3)} $) and the absorption coefficient is rather large (particularly for wavelengths around 1.5 μm) due to the very weak absorption: the weak nonlinearity can be used over a long length.

Figure 1: Intrinsic losses of silica. At long wavelengths, infrared absorption related to multiphonon absorption (vibrational resonances) is dominating. At shorter wavelengths, Rayleigh scattering at the unavoidable density fluctuations in the glass is more important. There is a loss minimum of ≈ 0.2 dB/km around 1.55 μm. Some telecom fibers nearly reach that level. If the fiber contains hydroxyl (OH) ions, additional peaks at 1.39 μm and 1.24 μm can be seen in the loss spectrum.

Silica fibers dominate many applications, such as optical fiber communications (except for very short distances with plastic optical fibers), most fiber lasers and amplifiers, and fiber-optic sensors. The large efforts which have been invested in the development of various kinds of silica fibers have further increased the performance advantages of such fibers over fibers based on other materials (see below).

There are also pure silica fibers in the form of photonic crystal fibers, containing tiny air holes. Here, the guidance (waveguide function) is achieved either by a reduced effective index of the cladding (caused by a larger fraction of air) or by a photonic bandgap effect.

For special applications, certain non-silica fibers are required:

• Phosphate glass fibers can be advantageous when a high doping concentration of rare earth ions is required. There are also phosphosilicate fibers, which are silicate fibers doped with P2O5.
• Fluoride fibers containing heavy metals can be used for the transmission of mid-infrared light, and for fiber lasers or amplifiers where low-energy laser transitions with long metastable level lifetimes are required.
• Plastic optical fibers (polymer fibers) can be cheaper and thicker than silica fibers. They are used e.g. for illumination purposes and for short-range data transmission.

Case Study

The following case study is available:

Suppliers

Bibliography

(Suggest additional literature!)

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.