Mechanical properties and numerical simulation of FDM 3D printed PETG/carbon composite unit structures (original) (raw)
PETG/carbon fiber composites with different structures produced by 3D printing
Ibrahim M . Alarifi
Polymer Testing, 2023
View PDFchevron_right
IRJET- Mechanical and Electrical Behavior of Polyethylene Terephthalate Glycol (PETG) Reinforced with Multiwall Carbon Nanotubes (MWCNT) by using Fused Deposition Modeling 3D Printing
IRJET Journal
IRJET, 2020
View PDFchevron_right
Effect of Process Parameters on Different Properties of 3D Printed PETG Parts Prepared Using FDM
Dhaval Chauhan
International Journal of Advanced Research in Science, Communication and Technology, 2022
View PDFchevron_right
Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts
Abilio Silva
Polymers
View PDFchevron_right
Mechanical Behaviour of 3D Printed Composite Materials
Dimitrios Tzetzis
Fiabilitate şi Durabilitate, 2017
View PDFchevron_right
3D printed fiber reinforced polymer composites - Structural analysis
Mahdi Mohammadizadeh
Composites Part B: Engineering, 2019
View PDFchevron_right
Printability and Tensile Performance of 3D Printed Polyethylene Terephthalate Glycol Using Fused Deposition Modelling
Hedi NOURI
Polymers
View PDFchevron_right
Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
Fuda Ning
View PDFchevron_right
The Effect of Varying Infill Densities on Tribiological Properties of 3D Printed and Annealed CF-Petg Composites
Rajesh Ruban
2021
View PDFchevron_right
Research into Specific Mechanical Properties of Composites Produced by 3D-Printing Additive Continuous-Fiber Fabrication Technology
Štefan Václav
Materials
View PDFchevron_right
Characterization of continuous carbon fibre reinforced 3D printed polymer composites with varying fibre volume fractions
E. Archer
Composite Structures, 2021
View PDFchevron_right
Determining process-window for manufacturing of continuous carbon fiber-reinforced composite Using 3D-printing
Nastaran Mosleh
Materials and Manufacturing Processes, 2020
View PDFchevron_right
Experimental Characterization and Analysis of the In-Plane Elastic Properties and Interlaminar Fracture Toughness of a 3D-Printed Continuous Carbon Fiber-Reinforced Composite
Norbert Blanco
Polymers
View PDFchevron_right
COMPARISON AND EVALUATION OF SURFACE AND MECHANICAL CHARACTERISTICS OF CARBON FIBRE PETG WITH POLYLACTIC ACID AND ACRYLONITRILE BUTADIENE STYRENE NATRAJ ATHREYA A S
TJPRC Publication
View PDFchevron_right
3D-Printed Fiber-Reinforced Polymer Composites by Fused Deposition Modelling (FDM): Fiber Length and Fiber Implementation Techniques
Tze Chuen Yap
Polymers, 2022
View PDFchevron_right
Effect of FDM process parameters on mechanical properties of 3D-printed carbon fibre–PLA composite
ömer şengül
Progress in Additive Manufacturing, 2020
View PDFchevron_right
3D printing of Continuous Fiber Reinforced Composites: A Review of the Processing, Pre- and Post-Processing Effects on Mechanical Properties
Abdolvahed Kami
2021
View PDFchevron_right
Evaluation of Tensile Properties and Damage of Continuous Fibre Reinforced 3D-Printed Parts
Alberto Pertuz
Key Engineering Materials, 2018
View PDFchevron_right
Compressive Behaviour of 3D-Printed PETG Composites
Sara Valvez
Aerospace, 2022
View PDFchevron_right
Elastic Modulus and Flatwise (Through-Thickness) Tensile Strength of Continuous Carbon Fibre Reinforced 3D Printed Polymer Composites
Cormac McGarrigle
Materials, 2022
View PDFchevron_right
Open hole tensile testing of 3D printed continuous carbon fiber reinforced composites
Seyed Hamid Reza Sanei
Journal of Composite materials , 2020
View PDFchevron_right
3D Printing of Fiber-Reinforced Plastic Composites Using Fused Deposition Modeling: A Status Review
sathish kannan
Materials, 2021
View PDFchevron_right
Tailoring strength and modulus by 3D printing different continuous fibers and filled structures into composites
Ihtisham Ali
Advanced Composites and Hybrid Materials, 2019
View PDFchevron_right
Tensile properties and failure behavior of chopped and continuous carbon fiber composites produced by Additive Manufacturing
Horacio Ahuett Garza
Additive Manufacturing
View PDFchevron_right
Effect of Voids and Printing Parameters on the Mechanical Behavior of Composite Structure Manufactured by 3D Printing Fused Deposition Modeling
wogayehu worku
3D printed composite materials mechanical property , 2021
View PDFchevron_right
3D Printed Hollow Off-Axis Profiles Based on Carbon Fiber-Reinforced Polymers: Mechanical Testing and Finite Element Method Analysis
Jakub Měsíček
Polymers
View PDFchevron_right
3D-Printed Carbon Fiber Reinforced Polymer Composites: A Systematic Review
Seyed Hamid Reza Sanei
Journal of Composites Science
View PDFchevron_right
Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
Mohammad Heidari-Rarani
Composites Part B: Engineering, 2019
View PDFchevron_right
Experimental Study of 3D printing Density Effect on the Mechanical Properties of the Carbon-Fiber and Polylactic Acid Specimens
Ihsan AbdulHussein
Engineering and Technology Journal, 2019
View PDFchevron_right
FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments
sachini wickramasinghe
Polymers
View PDFchevron_right
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning
View PDFchevron_right
Tensile Properties of 3D-printed Continuous-Fiber-Reinforced Plastics
Radu Petruse
2022
View PDFchevron_right
MECHANICAL PROPERTIES OF 3D PRINTED FIBER REINFORCED THERMOPLASTIC
Seyed Hamid Reza Sanei
ASME 2019 International Mechanical Engineering Congress and Exposition, 2019
View PDFchevron_right