STRESS CONCENTRATION FACTOR Research Papers (original) (raw)
To evaluate the phytoremediation capability of some poplar and willow clones a hydroponic screening for cadmium tolerance, accumulation and translocation was performed. Rooted cuttings were exposed for 3 weeks to 50 μM cadmium sulphate in... more
To evaluate the phytoremediation capability of some poplar and willow clones a hydroponic screening for cadmium tolerance, accumulation and translocation was performed. Rooted cuttings were exposed for 3 weeks to 50 μM cadmium sulphate in a growth chamber and morpho-physiological parameters and cadmium content distribution in various parts of the plant were evaluated. Total leaf area and root characteristics in clones and species were affected by cadmium treatment in different ways. Poplar clones showed a remarkable variability whereas willow clones were observed to be more homogeneous in cadmium accumulation and distribution. This behaviour was further confirmed by the calculation of the bio-concentration factor (BCF) and the translocation factor (Tf). Mean values of all the clones of the two Salicaceae species showed that willows had a far greater ability to tolerate cadmium than poplars, as indicated by the tolerance index (Ti), calculated on the dry weight of roots and shoots of plants. As far as the mean values of Tf was concerned, the capacity of willows to translocate was double that of poplars. On the contrary, the mean values of total BCF in poplar clones was far higher with respect to those in willows. The implications of these results in the selection of Salicaceae clones for phytoremediation purposes were discussed.
We report the findings of a comparative analysis examining patterns of accumulation and partitioning of the heavy metals copper (Cu), lead (Pb) and zinc (Zn) in mangroves from available field-based studies to date, employing both species... more
We report the findings of a comparative analysis examining patterns of accumulation and partitioning of the heavy metals copper (Cu), lead (Pb) and zinc (Zn) in mangroves from available field-based studies to date, employing both species level analyses and a phylogenetic approach. Despite mangroves being a taxonomically diverse group, metal accumulation and partitioning for all metals examined were broadly similar across genera and families. Patterns of metal accumulation were also similar regardless of whether species were classified as salt secreting or non-secreting. Metals were accumulated in roots to concentrations similar to those of adjacent sediments with root bio-concentration factors (BCF; ratio of root metal to sediment metal concentration) of ⩽1. Root BCFs were constant across the exposure range for all metals. Metal concentrations in leaves were half that of roots or lower. Essential metals (Cu and Zn; translocation factors (TF; ratio of leaf metal to root metal concentration) of 0.52 and 0.53, and leaf BCFs of 0.47 and 0.51, respectively) showed greater mobility than non-essential metals (Pb; TF of 0.31 and leaf BCF of 0.11). Leaf BCFs for the essential metals Cu and Zn decreased as environmental concentrations increased. The non-essential metal Pb was excluded from leaf tissue regardless of environmental concentrations. Thus mangroves as a group tend to operate as excluder species for non-essential metals and regulators of essential metals. For phytoremediation initiatives, mangrove ecosystems are perhaps best employed as phytostabilisers, potentially aiding in the retention of toxic metals and thereby reducing transport to adjacent estuarine and marine systems.
- by Muhammad Arain
- •
- Engineering, Soil, Microwave, Mobility
- by Peter H. Santschi and +1
- •
- Geochemistry, Oceanography, Ultrafiltration, Marine chemistry
This study aims at investigating the kinetics of calcium carbonate precipitation (scaling), that occurs in the form of vaterite, when treating seawater by direct contact membrane distillation (DCMD) operated at high concentration factors... more
This study aims at investigating the kinetics of calcium carbonate precipitation (scaling), that occurs in the form of vaterite, when treating seawater by direct contact membrane distillation (DCMD) operated at high concentration factors (from 4 to 6). Induction time measurements carried out by dynamic light scattering (DLS) allowed to identify the shifting between homogeneous and heterogeneous nucleation mechanisms as a
- by Peter H. Santschi and +2
- •
- Geochemistry, Oceanography, Marine chemistry, Glutathione
A HPLC with gradient elution method for the determination of the synthetic phenolic antioxidants (SPAs) propyl gallate (PG), tertiary butyl hydroquinone (TBHQ), butylated hydroxyanisole (BHA), and butylated hydroxytoluene (BHT) in food... more
A HPLC with gradient elution method for the determination of the synthetic phenolic antioxidants (SPAs) propyl gallate (PG), tertiary butyl hydroquinone (TBHQ), butylated hydroxyanisole (BHA), and butylated hydroxytoluene (BHT) in food items is described. A C18 column served as the stationary phase; the gradient elution was formed by acetonitrile and water:acetic acid (1%). The UV detector was set at 280 nm. Under the recommended conditions, separation of the four SPAs was achieved in less than 8 min. Analytical characteristics of the HPLC method such as limit of detection, linear range, and reproducibility were evaluated. Extraction parameters were optimized for the recoveries of the SPAs in different types of food items (cooking oil, margarine and butter, and cheese). Before the HPLC separation, the SPAs were extracted with methanol/acetonitrile (1:1, v/v) and were subjected to vortex/ultrasonic treatment. The extracts were next kept in a freezer (∼2 h) to precipitate co-extracted components. Recoveries of the SPAs when spiked to cooking oil, margarine, butter and cheese at 50 and 200 mg l−1 were in the ranges 93.3–108.3% for PG, 85.3–108.3% for TBHQ, 96.7–101.2% for BHA and 73.9–94.6% for BHT. The method was applied to the determination of SPAs in 38 food items (16 cooking oils, ten margarine, six butter and six cheese samples). The levels of SPAs in positive samples are all below the legal limits of Malaysia.
A meta-analysis based on published experiments with lactating dairy cows was conducted to study the effects of dietary forage and concentrate factors on apparent total diet digestibility. A data set was collected that included a total of... more
A meta-analysis based on published experiments with lactating dairy cows was conducted to study the effects of dietary forage and concentrate factors on apparent total diet digestibility. A data set was collected that included a total of 497 dietary treatment means from 92 studies. The diets were based on grass silage or on legume or whole-crop cereal silages partly or completely substituted for grass silage. The silages were supplemented with concentrates given at a flat rate within a dietary comparison. For the statistical evaluation, the data were divided into 5 subsets to quantify silage (digestibility, 42 diets in 17 studies; fermentation characteristics, 108 diets in 39 studies) and concentrate (amount of supplementation, 142 diets in 59 studies; concentration of crude protein, 215 diets in 82 studies; carbohydrate composition, 66 diets in 23 studies) factors on total diet digestibility. The diet digestibility of dairy cows was determined by total fecal collection or by using ...
- by Peter H. Santschi and +2
- •
- Geochemistry, Oceanography, Speciation, Trace Metals
- by Amitai Katz and +2
- •
- Geology, Geochemistry, Water Chemistry, Ground Water
A measurement program in this study has been undertaken to measure the concentrations of particles and Hg0 in rural areas of New York State during the summer of 2000 and 2001. Sampling was performed at sites in southwestern (Stockton, NY)... more
A measurement program in this study has been undertaken to measure the concentrations of particles and Hg0 in rural areas of New York State during the summer of 2000 and 2001. Sampling was performed at sites in southwestern (Stockton, NY) and northern New York (Potsdam, NY) where these materials may be transported into the New York from the central United States and from Canada. The data from these measurements were used in paired receptor models to assess the origins of the measured concentrations. Factor analysis in the form of positive matrix factorization (PMF) was used to obtain information about possible sources of the aerosol. Six and seven sources were resolved from Stockton and Potsdam sites, respectively. Six of the sources are common to the two sites in these two summers. They are secondary sulfate, secondary nitrate, soil, wood smoke, zinc smelter and copper smelter. A nickel smelter source is also resolved at Potsdam. Potential source contribution function (PSCF) analysis which combines the aerosol data with the air parcel backward trajectories was applied to identify possible source areas and pathways from these sources at the two sites. The combination of the two receptor modeling methods, PMF and PSCF, provides an effective way in identifying atmospheric aerosol sources and their likely locations. Emissions from different anthropogenic activities as well as secondary aerosol production are the main source measured in Potsdam and Stockton.
The simple and rapid pre-concentration techniques viz. cloud point extraction (CPE) and solid phase extraction (SPE) were applied for the determination of As3+ and total inorganic arsenic (iAs) in surface and ground water samples. The... more
The simple and rapid pre-concentration techniques viz. cloud point extraction (CPE) and solid phase extraction (SPE) were applied for the determination of As3+ and total inorganic arsenic (iAs) in surface and ground water samples. The As3+ was formed complex with ammonium pyrrolidinedithiocarbamate (APDC) and extracted by surfactant-rich phases in the non-ionic surfactant Triton X-114, after centrifugation the surfactant-rich phase was diluted with 0.1 mol L−1 HNO3 in methanol. While total iAs in water samples was adsorbed on titanium dioxide (TiO2); after centrifugation, the solid phase was prepared to be slurry for determination. The extracted As species were determined by electrothermal atomic absorption spectrometry. The multivariate strategy was applied to estimate the optimum values of experimental factors for the recovery of As3+ and total iAs by CPE and SPE. The standard addition method was used to validate the optimized methods. The obtained result showed sufficient recoveries for As3+ and iAs (>98.0%). The concentration factor in both cases was found to be 40.