Industry Research Papers - Academia.edu (original) (raw)

Technology is being used in our society in all areas, mostly in industry, and generates the most interest in current research since it is a part of day-to-day activities. The main objective of this research was to use bibliometric... more

Technology is being used in our society in all areas, mostly in industry, and generates the most interest in current research since it is a part of day-to-day activities. The main objective of this research was to use bibliometric analysis to analyze the production of scientific literature on digital twin and smart manufacturing with a focus on Industry 4.0, using information from the Web of Science database. To conduct the study, the keywords necessary for data selection were chosen, and then analyzed based on different variables such as author productivity, citations, most productive institutions, publishers with the highest number of publications, scientific document classification, countries with the highest number of publications, and a network analysis using VOSviewer. The results showed Tao F. and Soderberg R. were the main authors, that China was the country with the highest knowledge, and Elsevier was the main publisher. Although the subject has only been in publication for...

This study presents the effects of environmental pollution on the quality of domestic roof-harvested rainwater (DRHRW) using fuzzy comprehensive assessment (FCA). Seven metals (Cu, Cd, Pb, Zn, Fe, Ca, and Mg) and six water-quality... more

This study presents the effects of environmental pollution on the quality of domestic roof-harvested rainwater (DRHRW) using fuzzy comprehensive assessment (FCA). Seven metals (Cu, Cd, Pb, Zn, Fe, Ca, and Mg) and six water-quality parameters (Acidity, PO4 (3-), SO4 (2-), NO3 (-) , Cl(-), and pH) were investigated in DRHRW sampled from 12 sampling points each from Ibadan (residential) and Lagos (industrial) environments, Nigeria. The results of these parameters were formulated into membership function fuzzy matrices based on four contamination classifications of high, marginal, low, and poor qualities using regulatory limits as criteria. The products membership function matrices and weight matrices generated indices that classified the degree of anthropogenic activity impact on the sites. Results of FCA classified the DRHRW from residential environment as between high and marginal quality, whereas DRHRW from industrial environment is classified between marginal and low quality. Lead ...

In the present article, using dynamic panel data and large industrial plants, annual data for the period 1994-2007, effects of the industrial demand shocks on the production of different industries, divided according two digit ISIC, have... more

In the present article, using dynamic panel data and large industrial plants, annual data for the period 1994-2007, effects of the industrial demand shocks on the production of different industries, divided according two digit ISIC, have been examined.
The manner and degree of effectiveness of industrial demand shocks on the production of different industries is aim of this article. Results of the article are as follows:
A- The positive industrial demand shocks have been effective on the production of some of the large industrial plants but they don't affect some of others.
B- The negative industrial demand shocks have not had a meaningful effect on the production of large industrial plants.
C- Industrial demand shocks have not had asymmetrical effects on the production of all industries. They have had asymmetrical effects on industries with code numbers, 16, 17, 18, 19, 20, 21, 22, 24, 28, 30, 33 and 36, but they haven't asymmetrical effects on others industries' production.
D- Intensity of the affects of industrial demand shocks is not the same in the production of different industries.

A major concern by the health decision makers in Gulf Cooperative Council (GCC) countries is the burden of financing healthcare. While other GCC countries have been examining different options, Saudi Arabia has endeavoured to reform its... more

A major concern by the health decision makers in Gulf Cooperative Council (GCC) countries is the burden of financing healthcare. While other GCC countries have been examining different options, Saudi Arabia has endeavoured to reform its private healthcare system and control expatriate access to government resources through the provision of Compulsory Employment-Based Health Insurance (CEBHI). The objective of this research was to investigate, in a natural setting, the characteristics of uninsured expatriates based on their personal and workplace characteristics. Using a cross-sectional survey, data were collected from a sample of 4,575 male expatriate employees using a multi-stage stratified cluster sampling technique. Descriptive statistics were used to summarize all variables, and the dependent variable was tabulated by access to health insurance and tested using Chi-square. Logistic analysis was performed, guided by the conceptual model. Of survey respondents, 30% were either uni...

The transportation equipment industry is one of the few Canadian industries that is as productive as its U.S. counterpart. However, labour productivity growth in the Canadian transportation equipment industry declined from 4.5 per cent... more

The transportation equipment industry is one of the few Canadian industries that is as productive as its U.S. counterpart. However, labour productivity growth in the Canadian transportation equipment industry declined from 4.5 per cent per year in 1981-2000 to 1.7 per cent per year in 2000-2007. This article investigates whether restructuring and the reallocation of output and resources within the industry after 2000 contributed to this decline. It shows that the dramatic decline in productivity growth was mainly due to the slowdown in productivity growth in sub-industries, which can largely be traced to the decline in labour productivity growth of continuing plants. Finally, the article shows that even if the Canadian industry mix were the same as the U.S. mix, the productivity growth profile of the Canadian transportation equipment industry would not change.

The Industrial Internet of Things, or IIoT, introduces Internet-enabled devices into industrial process systems operating in the energy, transportation, healthcare, utilities, cities, agriculture, and other critical infrastructure... more

The Industrial Internet of Things, or IIoT, introduces Internet-enabled devices into industrial process systems operating in the energy, transportation, healthcare, utilities, cities, agriculture, and other critical infrastructure sectors, establishing linkages between previously-air gapped information technology (IT) and operational technology (OT) networks. While the introduction of these Internet-enabled devices creates new efficiencies, improves performance, increases productivity, and increases profitability, it also introduces new security challenges and risks. IIoT is a system of systems; the architecture of a single IIoT system consists of different layers, with each layer performing a distinct function, having unique operational characteristics, and relying upon different devices and communication protocols than other layers of the system. Because of the unique characteristics of these various layers and functions, the vulnerabilities and threats associated with them also d...

In the last few years, the management literature has become noisy with Industry 4.0 (I4.0). Although several concepts and typologies intend to make the phenomenon more understandable, these endeavours generally focus on technological... more

In the last few years, the management literature has become noisy with Industry 4.0 (I4.0). Although several concepts and typologies intend to make the phenomenon more understandable, these endeavours generally focus on technological aspects or specific issues. Therefore, integrated approaches of the I4.0 transformation on the business side and a comprehensive investigation of this phenomenon on the academic side are still needed. This paper synthetizes the lessons of 15 case studies from five sectors (automotive, FMCG, logistics services, retail, and business services) and places them in a triadic framework of technology, strategy, and organization. The case studies are based on interviews, internal documents and public information. This paper reveals that the analysed companies focus on I4.0 technologies that are substantially related to the development of core activities. Companies in a highly competitive global environment (e.g., automotive industry and business services) are mo...

In a voluntary national effort, U.S. industry, education, labor, and government have initiated the development of standards for job skills and competencies in jobs in 15 economic sectors. The aim of the skill standards is to maintain a... more

In a voluntary national effort, U.S. industry, education, labor, and government have initiated the development of standards for job skills and competencies in jobs in 15 economic sectors. The aim of the skill standards is to maintain a globally competitive workforce. Efforts to include occupational safety and health knowledge and skills as core elements in these standards are described. The first skill standards to include occupational safety and health competencies were developed for the manufacturing sector, evaluated by 3,800 workers in 700 companies, and published. National skill standards can stimulate extensive training in occupational safety and health, with resultant application to a larger percentage of workers than ever before.

The total energy and fossil fuels used in producing a desktop computer with 17-in. CRT monitor are estimated at 6400 megajoules (MJ) and 260 kg, respectively. This indicates that computer manufacturing is energy intensive: the ratio of... more

The total energy and fossil fuels used in producing a desktop computer with 17-in. CRT monitor are estimated at 6400 megajoules (MJ) and 260 kg, respectively. This indicates that computer manufacturing is energy intensive: the ratio of fossil fuel use to product weight is 11, an order of magnitude larger than the factor of 1-2 for many other manufactured goods. This high energy intensity of manufacturing, combined with rapid turnover in computers, results in an annual life cycle energy burden that is surprisingly high: about 2600 MJ per year, 1.3 times that of a refrigerator. In contrast with many home appliances, life cycle energy use of a computer is dominated by production (81%) as opposed to operation (19%). Extension of usable lifespan (e.g. by reselling or upgrading) is thus a promising approach to mitigating energy impacts as well as other environmental burdens associated with manufacturing and disposal.

Illness and injury have a significant impact on employees, their families and employers. The consequences faced by an injured worker could lead to disability, which could then lead to inability to work. This study examined the patterns of... more

Illness and injury have a significant impact on employees, their families and employers. The consequences faced by an injured worker could lead to disability, which could then lead to inability to work. This study examined the patterns of the Return to Work (RTW) using data from The Social Security Organisation (SOCSO) of Malaysia RTW database from 2010 to 2013. Factors of successful return to work, employees' salary upon returning to formal employment were also investigated. Gender, age, year of injury, industry, and job hierarchy were found to be significant predictors of employees' salary upon returning to work. Although there are other costs involved on the part of employers and employees, themselves, in the long term the financial returns that can be brought back by injured workers who have successfully returned to work combined with the qualitative benefits substantially outweighs the costs of RTW program.